He did all that work to only see that making them out of Carbon-Fiber would save him an extra Kg. However, to also state that skipping breakfast would save him an extra Kg also. So instead I would recommend you skip breakfast just a few more times, and you will also save that same 4.5 Kg.
I continue to be astounded by your attention to detail and willingness to even look in the general direction of CSM without gloves on. Looks great! Gaps / shut lines are much better than the factory ones!
It’s crazy how you can cut/grind fiberglass while wearing tank tops and slippers. I get itchy just by watching your videos. Besides that, love your craft bro. Aloha from Hawaii.
Yeah it's a trade off. It's been crazy hot here the past few months and I'd rather be covered in fiberglass than sweating like mad in some overalls. Chur
I’ve been itching just watching this series 😂. Your work with fibreglass is right up with the best I’ve seen. You appreciate the importance of good prep and have a willingness to redo something if it’s not right rather than try to bodge it. Great videos mate. Thanks for making them.
Man when that fender popped out of the mold i was just blown away. The Part looks absolutely perfect right out of the mold. You´ve got some skills my god, excited to try this myself soon for my miata. Thank you for these videos! Greetings from Germany
You should be stoked with that result! They look awesome! And fit perfect. A lot of work has gone into these and every bit of it shows in the final result. Great work! Been good to watch the process too. Can’t wait to see the next additions 👍🏻
Those fenders came amazing man..... great job. this is the stuff that keeps me addicted to car builds on the internet. S tier part for your build. thank you its been a pleasure to watch this....
The amount of work here is astounding and your skill is highly admirable. Very well done. Your style of video is refreshing and very welcome in a sea of trash content. Thank you for your contributions.
There is no way to do it more perfect.... all the little details - it's just wow! And the result looks more than perfect! No one would belive that this is a "diy garage project"
Mate you make alot of work for yourself. I seen a dozen things that didn't need to be done.But very awesome that you gave composites ago I take my hat off to you for showing people composites can be done at home
Good job Mate, the Wings fit as good as a Factory Wing & we appreciate you showing & admiting that you made some mistakes, you're only Human afterall 👍👍👍
Man I love how these fender came out, I need to work on my finish when it come to molds. I'm so inpatient and fix all my problems on the post work. Good job 👏
Watching you make the molds and use them has inspired me to pull the trigger on making my mk2 supra a wideboi kit. I always feared not being able to go back, and this fixes that.
Awesome job dude, my was a bodywork master and always remarked on how important the prep is. It's just not the done thing on TH-cam now just a quick slap of p38 and wrap it lol, it's great to see you exercise patience in videos and it's reflected in the quality brother 👊🏻
Those Fender's, came out freaking awesome 👍 your work looks for sure like high quality OEM parts. Keep up the good work. Enjoying every session of car parts building therapy here 💪
I have seen some of these conversions where nothing has been done to the rear arches and they do not look right with an aggressive front and bare rear. Glad to hear you will be doing the rear quarters to match the front. Amazing work
Awesome !!!! How you work and the editing of the video is unbeatable, you show the work and not talking to the camera like other "TH-camrs" who use up video time that way. A picture is worth a thousand words. A greeting from Spain.
日本から応援しています I'm rooting for you from Japan. 完成がとても楽しみです I'm really looking forward to the completion. 完成まで頑張って下さい :D Please do your best until it is completed. :D
I have to admit I was sceptical when he started slicing the steel fender but the way you can make a hacked up fender full of bondo into a mould that produces beautiful parts is a bit of a eye-opener 😮
Cheers mate. Don't worry, I consolidate all my fiberglass parts pretty thoroughly and then sand off any nibs before handling. The back side of these panels are as smooth as the fronts. 👍
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](/img/n.gif)
Your videos are helping me get the guts to try and make my own one-off fiberglass parts. Appreciate you
That's awesome to hear bro! Thank you
Me as well I feel that challenge part is going to be the mold finishing
너도 귀하의냐
He did all that work to only see that making them out of Carbon-Fiber would save him an extra Kg. However, to also state that skipping breakfast would save him an extra Kg also. So instead I would recommend you skip breakfast just a few more times, and you will also save that same 4.5 Kg.
I've said it before and I'll say it again; This is ART. F*cking Beautiful Mate, your attention to detail every step of the process is impeccable.
I continue to be astounded by your attention to detail and willingness to even look in the general direction of CSM without gloves on. Looks great! Gaps / shut lines are much better than the factory ones!
I have been making molds for over 47 years. I do custom fabrication on yachts. Your pretty good. It's fun watching someone else do all the work.
It’s crazy how you can cut/grind fiberglass while wearing tank tops and slippers. I get itchy just by watching your videos. Besides that, love your craft bro. Aloha from Hawaii.
Yeah it's a trade off. It's been crazy hot here the past few months and I'd rather be covered in fiberglass than sweating like mad in some overalls. Chur
I’ve been itching just watching this series 😂. Your work with fibreglass is right up with the best I’ve seen. You appreciate the importance of good prep and have a willingness to redo something if it’s not right rather than try to bodge it. Great videos mate. Thanks for making them.
10:10 The man even has a sofisticated Red Device to look for Air bubbles in Fibreglass
日本語字幕ありがとうございます。とても丁寧な仕事で
感動しています。
Man when that fender popped out of the mold i was just blown away. The Part looks absolutely perfect right out of the mold. You´ve got some skills my god, excited to try this myself soon for my miata. Thank you for these videos! Greetings from Germany
You should be stoked with that result! They look awesome! And fit perfect. A lot of work has gone into these and every bit of it shows in the final result. Great work! Been good to watch the process too. Can’t wait to see the next additions 👍🏻
This is by far the best tutorial on this I've seen yet. Thanks so much mate. Looks incredible, so much prep paid off
Those fenders came amazing man..... great job. this is the stuff that keeps me addicted to car builds on the internet. S tier part for your build. thank you its been a pleasure to watch this....
You are truly an artist....wizard if you will....as you perform magic with fibre glass. Also, i do love your safety jandals
Cheers bro. The restraint it takes me to not work in jandals or just barefoot in each episode haha.
@@TofuAutoWorks hahahaha, ive seen in some episodes you lost the battle against working bare foot
Да мужик упорства у тебя вагон и маленькая тележка.
Крутые детали получились.
Браво👍
👍 Каждый раз когда захожу в ютюб, жду новую серию от тебя! Мне очень нравится твоя работа. Продолжай радовать нас новыми эпизодами! Удачи тебе!
The amount of work here is astounding and your skill is highly admirable. Very well done. Your style of video is refreshing and very welcome in a sea of trash content. Thank you for your contributions.
Marvelous works. The gaps look really clean and equally flushed. Nice!
The quality and fit and finish of your parts is better than any off the shelf fibreglass part ive ever seen. Nice work.
There is no way to do it more perfect.... all the little details - it's just wow! And the result looks more than perfect! No one would belive that this is a "diy garage project"
Немного завидую вашему климату 😁
Отлично, как всегда, вдохновляет на качественную работу 👍🏻
After an eternity they’re done! It was worth the watch!
Man of no words, but always enjoy your videos. Quality is top notch!
I love the inlays of your Logo
It looks awesome
Was wondering when another video would be posted. Congratulations on another incredible work.
Mate you make alot of work for yourself. I seen a dozen things that didn't need to be done.But very awesome that you gave composites ago I take my hat off to you for showing people composites can be done at home
you really have to say respect from zero to such a really great part
you could say it's from the aftermarket so good it looks
What a journey! Love your videos. Fantastic work!
I started a little composite shop two years ago, and my skill sets just now getting good enough to make parts
This is my favorite project in all of youtube. Can't wait to see the outcome!
Good job Mate, the Wings fit as good as a Factory Wing & we appreciate you showing & admiting that you made some mistakes, you're only Human afterall 👍👍👍
It’s cool to see that you don’t have to have the best of the best tools and shop to still create amazing stuff
Your quality is amazing the details you take are better than any kit I have seen, keep up the great work
reusable molds are just awesome!
Дуже гарне місце і природа навколо вашої майстерні!
You're representing NZ. Such awesome skills. I'm keen what to see what you do next.
I wish every company that made fiberglass parts was this good at it
Really cool. Fenders look great
This looks OEM. This speaks how skilled you are. Awesome fam.
You got craftsman’s hands brother..Great skill set to have!You can make anything you want..Nissan is lookin cool..Miata was a killer
I hope your channel will gain millions, so when you're huge I can say "yeah, been following this dude since cyberpunk miata"
what a professional finnish, im a big fan of stock body, but im sure with the detail you put into this the wide body will look amazing too
Dude ! That's incredible work as always 👏 I wish I had a friend like you in my circle .
Oooohhhh yeah. Gimme that attention to detail. You know the way I like it...
Man I love how these fender came out, I need to work on my finish when it come to molds. I'm so inpatient and fix all my problems on the post work. Good job 👏
I want you to deliver the wonderful things you created to the world. The hood hinges and fenders are especially nice
from Japan
Watching you make the molds and use them has inspired me to pull the trigger on making my mk2 supra a wideboi kit. I always feared not being able to go back, and this fixes that.
Those fenders came out awesome! The gtr front end is really coming together!
Awesome job dude, my was a bodywork master and always remarked on how important the prep is. It's just not the done thing on TH-cam now just a quick slap of p38 and wrap it lol, it's great to see you exercise patience in videos and it's reflected in the quality brother 👊🏻
That looks mint mate can't wait to see how to change the rear end up
You are killing it!!! Great job
A MASTER at Work, impressive
Good job👌👍 very fantastic result
I'm really looking forward to your next project, hopefully it will always be launched
the quality of those parts are insane, they are a credit to your workmanship
good job for today.
Excellent work!
I want the tail lamp to be 35GTR!
I've never seen a Stagea that even changed the tail lamps!
Those Fender's, came out freaking awesome 👍 your work looks for sure like high quality OEM parts. Keep up the good work. Enjoying every session of car parts building therapy here 💪
Well done. Keep up the excellent work. Thank you for sharing the magic. Truly amazing.
"Le moment suprême" actual fenders from the moulds. 🤩
Exciting
Looks incredible. So
Much work and so much patience
A wonderful video, a follower from Morocco, North Africa, good luck my brother
I have seen some of these conversions where nothing has been done to the rear arches and they do not look right with an aggressive front and bare rear. Glad to hear you will be doing the rear quarters to match the front. Amazing work
I think you are dreaming all night about fiberglass... Nice job man !!
Huge amount of work involved and to a high standard, great to watch 👍👍
1st class brother. The effort and time put in has resulted in those fenders looking better than OE. Amazing job 🙌🏽
Nuck'n Futz! More amazing work. Now to go wrench on my own project for a bit.
Those turned out awesome!
I await every episode and when they come, they're always a treat.
line flow well wit the bumper amazing work finish is amazing aswell
this looks sooo good, it doesn't even need the widebody 😉
Love it ❤, looks epic, with wheels, it will already turn heads.
Awesome !!!! How you work and the editing of the video is unbeatable, you show the work and not talking to the camera like other "TH-camrs" who use up video time that way. A picture is worth a thousand words. A greeting from Spain.
Just wanted to share some love for this amazing build from germany :)
日本から応援しています
I'm rooting for you from Japan.
完成がとても楽しみです
I'm really looking forward to the completion.
完成まで頑張って下さい :D
Please do your best until it is completed. :D
This is Work of Art!!!!!! Awesome JOB and sooooo much profesionnal.
Congratulation and so much work💪💪💪💪
I am looking forward to what comes next! Great attention to
Detail as always 👍
お疲れ様！
今回もまたまた最高のクオリティーで動画を出してくれてThank You！
また次回を楽しみにしてます！
Very clean. Good job on the gaps! I don't know if I'm more impressed by the panel or your angle grinder skills 😂
I've been watching it since part 1, and it's so cool :)
Good work 👍
I’ll probably never work with glass fibre, but it’s cool to see the process! Looks great!!!
日本から見させて貰ってます！
豆腐オートワークスさん 凄い技術ですね！
これからも楽しみにしています！！
ありがとうございます！
greatest of compliments my friend
Beautiful work, just beautiful!
Your work is insane. Love this build 👌🏻
I will repeat myself. Theyre awesome!!
Just perfect. You work so great with fiber, absolutly perfect 👌 congrats 👏😀💯
Had a feeling they would come out looking great. After all the prep work. You should be very proud of your work. Love it. 👌👌👍
I have to admit I was sceptical when he started slicing the steel fender but the way you can make a hacked up fender full of bondo into a mould that produces beautiful parts is a bit of a eye-opener 😮
It's a brilliant work! Your attention to details inspires me.
21:55 Please, save your hands!
Cheers mate. Don't worry, I consolidate all my fiberglass parts pretty thoroughly and then sand off any nibs before handling. The back side of these panels are as smooth as the fronts. 👍
Awesome work!
really looking good - nice job
So impressed with how the fenders turned out. Great job man!
the perfect video to watch whilst eating dinner
You did great work making your molds. I know from trying that it is much harder than it looks to get good results.
This has gotta be some of the best fibreglass parts I've ever seen truly amazing work kinda making me want to give custom parts a try
Massive progress! Well-done, dude!
Built to perfection, you are the best buddy
You are an Artist my friend.
Your work is so superb!!!
By the time this guy is done, the R36 is out.
Ok but jokes aside, I admire your attention to detail. 😀
Incredible work bro 👌🏼
I’ve been itching to see these fenders finished and fitted to the car! Fibreglass pun intended 😂 fantastic job mate!
素晴らしい、美しい、完璧、驚嘆！