I just use tap water when I do a water bath. I was water bathing because in my opinion and testing it helped to spot any hairline cracks and seemed to strengthen my vessels. However now I only water bathe light colored or already spotty vessels. I don’t like the discoloration from the bath and now allow 5 days before sealing.
Hi thanks for watching the vibrating table I bought was this one Lab Vibrator - Dental Laboratory Equipment Roundness Vibrator Oscillator Shaker 4" Round a.co/d/iRqSgOx And the color I used is the Pothos green from earthsafefinishes.com
Yes I water bathe right after de molding. However I haven’t water bathed with my recent batches of dark vessels. And I’m considering stopping the bathes
This is the table I purchased Lab Vibrator - Dental Laboratory Equipment Roundness Vibrator Oscillator Shaker 4" Round www.amazon.com/dp/B072JVMBP3/ref=cm_sw_r_cp_apip_vNmbcvj7UPq5F
Hi. Can you email me the mold information that you bought from Amazon. I love the size of yours and it’s hard to tell when looking at them on Amazon. If have the info that would e great. Thank you
Hello thank you, I use the 3.5 tulip from moderncraftlabs.com And the Amazon molds are these Big DIY Cylinder Resin Plant... www.amazon.com/dp/B07PS6BYZR?ref=ppx_pop_mob_ap_share
Thank you for being so informative!! ♥️♥️♥️
Thank you so much for watching and I am happy to know that it helps others I love doing this and why not share my experiences thanks again
Why do you water bathe the vessels? Do you use regular water or distilled water? Thank you
I just use tap water when I do a water bath. I was water bathing because in my opinion and testing it helped to spot any hairline cracks and seemed to strengthen my vessels. However now I only water bathe light colored or already spotty vessels. I don’t like the discoloration from the bath and now allow 5 days before sealing.
Could you share the link to the vibrating Matt and the coloring that you were using
Hi thanks for watching the vibrating table I bought was this one Lab Vibrator - Dental Laboratory Equipment Roundness Vibrator Oscillator Shaker 4" Round a.co/d/iRqSgOx
And the color I used is the Pothos green from earthsafefinishes.com
Do you water bath right after remolding? I see mixed reviews on water baths
Yes I water bathe right after de molding. However I haven’t water bathed with my recent batches of dark vessels. And I’m considering stopping the bathes
Thank you!
Do you have a link for the table?
This is the table I purchased Lab Vibrator - Dental Laboratory Equipment Roundness Vibrator Oscillator Shaker 4" Round www.amazon.com/dp/B072JVMBP3/ref=cm_sw_r_cp_apip_vNmbcvj7UPq5F
I have the molds from Amazon as well and I cut some of the silicone off the bottom and now it is not a struggle for me to unmold my vessels.
I did the same after I read someone else cut that lip off and it wasn’t as much of a struggle but it was still quite rough on my fingers 😆
I did the same to mines and it's so much easier 🥰
Does the tulip lid fit on the cylinder vessel mold from amazon?
Yes it sure does
How much do you sell the large 25oz double-wicked candle? Do you mind my asking? I just started making concrete vessels so just curious. Thanks
I sell it for $45
Sorry also what mold/size are you using for the lid on the Amazon mold
I’m using the 3” lid from moderncraftlabs.com/collections/silicone-mold/products/3tulip-lid-mold
@The Tipsy Candle thank you sooooo much.. I have been searching for a lid for months
Love this! What size wooden wicks have worked for you in those vessels? Thanks!
Thank you I use the .5” wooden wicks for both of these vessels
What do you use to seal your vessels
I use earthsafefinishes.com the preserver/sealer on the inside and the marine gloss varnish on the outside
Where’s your favorite place to get pigments?
Liquid- Earth Safe Finishes
Oxides- Buddy Rhodes or Direcr Colors
Συγχαρητήρια ❤️❤❤️
What type of wax are you using?
If it’s summer I use a blend of natural soy wax 464 and 444 soy wax and in cooler months I use only 464
@@thetipsycandle thank you!
How long do you bathe your vessels! I love the colors!
Thank you I water bath for 12-24 hours
@@thetipsycandle Thank you!
How does your vessel look sooooo shiny? It's gorgeous!!!
Thank you I use earthsafefinishes.com their Marine Gloss varnish as my sealer for my vessels I really love the shine too
Hi - I love your blue & white vessela- very pretty!
Can I ask where you get your wooden wicks? They can be really expensive.
Thank you so much. Yes wooden wicks can be expensive. I order in bulk from both Wooden Wick and Bulk Apothecary
Hi. Can you email me the mold information that you bought from Amazon. I love the size of yours and it’s hard to tell when looking at them on Amazon. If have the info that would e great. Thank you
Hello thank you, I use the 3.5 tulip from moderncraftlabs.com
And the Amazon molds are these Big DIY Cylinder Resin Plant... www.amazon.com/dp/B07PS6BYZR?ref=ppx_pop_mob_ap_share