If you don't have an outside hose, use a spatula to scrape out as much as possible, fill the bowl half way with hot water and use an old kitchen sponge to clean as you pour this small amount of water & cement into dirt, rock mulch (it sinks into the dirt) or a public drain. I checked with my city & they said concrete contractors do this on every job.
I have a large bucket in my garden that I wash all of my molds and mixing bowls in. Then empty the bucket when it gets about half full with sediment, which I tip out in the garden. Once it dries I use it for drainage for my plant pots.
Without typing a book, I really enjoy your videos especially the ones where Colette makes a feature. You are the most thorough. I’ll let you know how things turn out when I decide to dive in. Love your work!🥰
You are AMAZING!! I just found you last night and I’m blown away. I couldn’t sleep because I was dreaming about making these containers. The wholesale search for concrete candle vessels stops here. THANK YOU💕 Jojo, owner Wireback Candle Co.
I save all my plastic containers and use blue foam sheets to make concrete molds. It's funny because I just poured two lamp bases using Calafia coconut milk jugs. If you cut the jugs in half you can use both the top and the bottom for cool different molds. Once the concrete is really dry I just cut the plastic away.
This is something I could easily get into. Also, I appreciate the reminder near the end about how the color as you unmold won't be the same when the concrete fully dries. There's a lesson to be learned there beyond making concrete jars. Love, love, love your content. Subscribed.
I found your channel about 2 days ago and you've inspired me to try my hand at concrete crafts. I've subscribed and watched all your vids. Thank you so much for all the info your pour into your vids.
Hello 🙋🏻♂️😍thanks so much for that awesome video, I have few questions, do you use pure gray cement that is used in buildings construction? What type of coloring do you use? Mica powder? Pigments? Maybe those are both the same? Can I use white cement?
Hello, first of all, I love and learned so much from your channel, thank you so much for this. I started my little candle business and I have one question. All my jars are sosmooth and not as matte as yours. I am not cleaning than between each filling and I am wondering why. Till now I am using only the cement all without color, could this be the reason? Or do you have other possibilities?
Hello! Sorry for the late reply. It most likely is the type of molds you are using. If they are molds made for resin (like the amazon molds), they will come out shinier.
I love your channel 😊 I have watched almost all of your videos & really appreciate you sharing your knowledge 🙏🏾 I am just starting out & I am slightly confused about the concrete mix! I've read up on what needs mixing together and I was under the impression that sand needs to be mixed in with the concrete? Could you please advise on what is the easiest & most cost-effective way for a perfect mix? I'm in the UK and I've been looking at the blue circle snowcrete, but not sure if white sand & which white sand should be added! I did a test run with some moulds & used 4 parts concrete & 6 parts sand 😅 they turned out solid with a few air bubbles 🫧 but I'm not sure I did the mix right! It's going to take practice!
Thank you so much for watching! The product that I use is cement premixed with fine sand. I am not the most keen on formulas. I would suggest checking out UpVibe here on TH-cam. Jai has amazing videos with lots of other formulas besides just what I use (cement-all).
Hi hope ur well ,I have a question i made white cement octagon tiles (coasters) and drew on them with aclyric paint , how ever while in mold i kept them in at least a whole hour , and after painting it and sealing it i kept it 2 days and so , in my conclusion the sealer isnt the best option what happend is after i wrapped them in paper n bubble wrap, we unvield them and they were wet like small layer of water what could be the reason? I do live in a more humid weather..
@@healingvshurttarot Just until the mold is no longer warm to the touch. It varies depending on what your temp and humidity is like. For me, it's usually 3-4 hours.
I had been thinking about creating my own candle vessels and I so thankful to have found your TH-cam. Among others artist things. I'm also a soap maker and have been searching for a soap mold. May I inquire where you found yours? TIA for you response ❤
Weird question I know but how porous is this mix? For instance if you pour water in one of the jars, how fast will it drain through the concrete? Thank you for the video!
Ah sorry for replying so late! I wait until the mold no longer feels warm to the touch, as that's a sign that it's ready to demold. Typically for me that's anywhere from 3-4 hrs, but it can vary depending on the climate where you live.
Bonjour, j’ai une question. J’essaie de réaliser des bougies en ciment/béton en Belgique, mais lorsque je coule ma cire ou lorsque ma bougie brûle mon récipient en ciment se fend, savez vous pourquoi? Est ce parce que je ne scelle pas mon pot en ciment? Si oui, puis je utiliser un vernis acrylique? Merci pour votre aide!
Sort of…the product I use “cement-all” is more of a repair and grout cement. It contains only cement and fine sand. I’m no expert, but for building houses I would think you would need concrete that has an aggregate in it, like rocks.
There can be a few reasons. Too much water in your mixture, not the right mixture, too big of a wick, the jar wasn’t dry enough… just all part of the trial and error process.
hey, first of all i love what you are doing bravo! I'm sorry to bother you, I have a problem with my concrete pots. When I pour the mixture into the mold I have a lot of water that rises to the surface and yet I have tried several consistencies... do you have an idea of the solution? Thanks very much A French subscriber 😉
Hello! Thanks so much for watching. Hmm...whenever I've come across that issue, it was because my mixture was too watery. Not sure what it would be other than that.
Just saw a guy using a drill with egg beater to mix his cement. HD carries cement all. Have you tried quikrete 60lbs bags? Or any other types of cement?
Hmm I would say whatever mold you use, make sure it's not a resin mold as though can make the concrete come out shiny. If you leave the exterior unsealed, it appears pretty matte in my opinion.
Hello, this is a successful video. I have a question: do you use only cement for the manufacture? Or do you still mix in sand or something similar so that the mold hardens? I tried it exclusively with cement from the hardware store, but it was unfortunately very porous after drying. Regards Christopher Wolf
Hi thanks for watching! Even though the product I use is called “cement-all”, it’s actually concrete. It’s premixed with fine graded sand. If you’re using plain cement, you definitely need some kind of aggregate mixed with it.
I just recently started making containers. I'm finding that my cement all is setting faster than I can pour it. Am I not adding enough water? It's the right consistency when I start to pour.
Hi there! This has been happening quite a bit to me. I talk about this more in my most recent videos, but I've been getting inconsistent bags of cement-all. It starts to set up really quick. I've found that adding "flow control" by the makers of cement-all helps a ton. If you check out my in-depth concrete candle jar tutorial a few videos back, I discuss flow control and how I use it.
After this video, I have yet to revisit the soap dish! haha! The sealer I use for everything else is water-based, so I figured it wouldn't last long on the soap dish.
Thank you for taking the time to share :) So I’m wondering after sealing, can these also be like coffee mugs too? If we seal it’ll be okay? Oh and I use cement all but it’s so dark. Any recs for white cement ?
I would’ve advise using them for drinking or eating purposes. Maybe you can if you find a specific sealer but idk. I have a video about adding titanium dioxide to the cement-all which lightens it.
@@calafiacandleco thank you! I have to remind myself this isn’t pottery. But should be decor only. Thank you for the response and taking the time. I already make decor candles but really want to make my own dishes and vessels - creative and saves $
Can you tell me how you seal the concrete trays and keep the matte finish. I tried some sealers but they are shiny and didn’t like that look. I really liked your which look more matte. Thanks love all of your videos.
You know, that is a great question and part of the reason I gave up on the soap dishes haha! With them constantly getting wet, I wasn't sure what sealer would work best and not wear off. I never really revisited them after this video.
The leaves are amazing. If I can “get it together “ 🙄, I want to make a rhubarb cement leaf for a water dish for critters. The deer, and night creatures used to drink from the doggie pool.
Thanks! I actually have been meaning to look for a different sealer than can work with the soap dish. The sealer I use is water-based, which would definitely not last long at all with a soap dish. I need to research that a bit more.
Hi! super loved your videos its amazing, easy and fun to watch. Just want to ask on your concrete jars do you cure it and put sealer (semi-gloss or matte) before pouring the wax? Thank you :)
@@calafiacandleco Alright will watch that this is actually my first video of you to watch. what about the curing i read on the article and watch on diff video to cure it for 5-7 days do you do it also?
Hello! Thanks for watching. I was getting water spots on my vessels from using tap water, so I switched to distilled and it hasn't been an issue. I know some people use regular spring bottled water or filtered water.
Hi, I’m wondering how you can get all white for the color of cement? I know you use titanium dioxide to lighten it but have you ever made a true white one before??
Hey there! I haven't made a true white with cement-all. You can add up to 5% of pigment powder before you start possibly compromising the integrity of your vessel. I haven't ever added that much, so I'm not sure how white the outcome is.
I just felt in love over here in Prague with your videos and decided to change my life and start concrete candle bussines :). I have seen so many videos but you are definetly the best inspiration. I just would like to ask you how long does it take to dry the candle pot? Especially the one with pigment. We do not have the Cement All over here so I mix Portland and sand and it takes almost 15 hours to safely unmold them. Those with the pigment even longer..and they get more fragile also. Thank you!!! :)❤
Suggestion for the leaf trays: You could try setting them on an old cookie sheet before pouring. That way once you've poured the concrete, you can give the sheet a little shimmy to level it out and light taps on the floor to release air bubbles. Just a thought. Thanks for your content, it's super informative!
Just personal preference. I do have one 3.5” tall mold. I like that one, as well. I was just looking for around an 8oz filled candle for my signature jar.
Hey i have a question. I keep getting these white dots on my vessels. Im currently using tap water for the mixture. Do you think the problem is the water or maybe im not mixing properly?
That is true in a way. You can use concrete, as it’s already a mix of cement + sand + an aggregate. Cement on its own won’t work. You would need to add at least sand to it. Possibly an aggregate, too.
@@calafiacandleco That makes sense, thank you. Is "cement-all" a name of a brand or what is this "all" for? :) Sorry if the question looks silly, I'm not an English native speaker.. And what brand do you use?
@@calafiacandleco Nice, but I am not able to find it in the UK... Could you advise an alternative, please? Also, please advise on how do you paint your concrete - do you use colourants for grey cement and do, actually, use grey cement, or you use white cement when want to make colourful pots?
I forgot to ask my question🐝 Are you making lids? Do you design dust covers for these? Thank you for sharing your knowledge and experience with us. We appreciate you more then you’ll ever know💕 -Jojo Wireback Candle Co.
I do not use lids. I design dust covers on canva and print them out using my Cricut. I would make a tutorial but i don’t even know how I got it to work on the Cricut 😂 I don’t think I could explain it again
I set the soap dish aside for now for that reason. The sealer I use for everything else won’t work since it’s water based. I need to research a different sealer for the soap dishes.
So looking into things I am wondering if cement all is a gray or white base, when buying colorant it ask u what your base is.. I went back to check I'm guessing the cement all is grey but it looks white in your video
Hi there. It takes some research and testing to find a mixture. You can't just use cement. You need cement + something else, whether it be sand, or another aggregate. I'm not the most versed on creating my own mixture, as the medium I use (Cement-All) is cement premixed with fine sand. I would recommend checking out some videos on UpVibe Candle's channel. Jai has awesome videos regarding this.
This is awesome, thank you, i'm new to all this stuff but loving it already (will be making molds for candles soon)
If you don't have an outside hose, use a spatula to scrape out as much as possible, fill the bowl half way with hot water and use an old kitchen sponge to clean as you pour this small amount of water & cement into dirt, rock mulch (it sinks into the dirt) or a public drain. I checked with my city & they said concrete contractors do this on every job.
I have a large bucket in my garden that I wash all of my molds and mixing bowls in. Then empty the bucket when it gets about half full with sediment, which I tip out in the garden. Once it dries I use it for drainage for my plant pots.
i swear jesus himself sent this video for me!!! thank you! thank you! thank you!
You are so funny man😂😂
Must be the TH-cam Algorithm aka Jesus
Without typing a book, I really enjoy your videos especially the ones where Colette makes a feature. You are the most thorough. I’ll let you know how things turn out when I decide to dive in. Love your work!🥰
Thank you so much! My favorites are when Colette is in them too! Lol.
You should name your company Greenhouse Candle Company!!
Have always used a plant sprayer to mist the dry powder...helps keep dust down and hard(er) to overwater 🤷
You are AMAZING!! I just found you last night and I’m blown away. I couldn’t sleep because I was dreaming about making these containers. The wholesale search for concrete candle vessels stops here.
THANK YOU💕
Jojo, owner Wireback Candle Co.
Thanks so much!
Agreed!!! Minnette’s Candles will be making her own vessels thanks to Bree!!🙏🏼🙌🏼💪🏼
Same, it's jsut a lot
I save all my plastic containers and use blue foam sheets to make concrete molds. It's funny because I just poured two lamp bases using Calafia coconut milk jugs. If you cut the jugs in half you can use both the top and the bottom for cool different molds. Once the concrete is really dry I just cut the plastic away.
This is something I could easily get into. Also, I appreciate the reminder near the end about how the color as you unmold won't be the same when the concrete fully dries. There's a lesson to be learned there beyond making concrete jars. Love, love, love your content. Subscribed.
Thank you so much for watching! 🤍
This is fantastic! Thank you so much! And you are so kind to answer so many questions in the comments!
Aw thank you! Thanks for watching :)
Thank you so much for sharing those tips for us.
Thank you for the comment about the paint and the consistency. No one else mentions that!
Thanks for watching!
I absolutely love your channel! You explain everything so clearly! Looking forward to a video about your shipping and packing process 🤍
Thank you so much. My packing video should be up today! :)
These turned out so pretty!
I found your channel about 2 days ago and you've inspired me to try my hand at concrete crafts. I've subscribed and watched all your vids. Thank you so much for all the info your pour into your vids.
Love this! Thank you so much for the support ❤️
She is awesome sauce
@@MoneyMimi 🤍
The way you are making these crafts is just perfect. Greetings from a Crafter.
Aw thank you!
Always love your videos, thank you for sharing. Love the outcome of your leaf and soap dish molds as well as your candle molds, Very nice!
Thank you so much, Deb! 🤍
Wow, they're beautiful. Thank you for sharing.
Thanks so much!
You are so talented, loveee the final products! ♥️
Aw thanks so much!
Is a skill anyone can learn 😂
Thank you for sharing your knowledge. I'm so happy I found your channel. Can you make a video on how you prepare your candles for shipping.
Yes! I have had a few people ask so I’m planning on filming that this week
All of your creations look so nice and smooth, Very nice! Thanks for sharing! :o)
Aw thank you! I appreciate it.
Hello 🙋🏻♂️😍thanks so much for that awesome video, I have few questions, do you use pure gray cement that is used in buildings construction? What type of coloring do you use? Mica powder? Pigments? Maybe those are both the same? Can I use white cement?
Did you mix sand with cement?
Great tutorial. Thank you for this!
Beautiful!
I absolutely LOVE your videos! Have you experienced HT issues with your concrete vessels?
Thank you so much! No, I can’t say I’ve experienced that
Hello, first of all, I love and learned so much from your channel, thank you so much for this. I started my little candle business and I have one question. All my jars are sosmooth and not as matte as yours. I am not cleaning than between each filling and I am wondering why. Till now I am using only the cement all without color, could this be the reason? Or do you have other possibilities?
Hello! Sorry for the late reply. It most likely is the type of molds you are using. If they are molds made for resin (like the amazon molds), they will come out shinier.
Thanks for the teaching ❤
Thanks for watching!
I love your channel 😊
I have watched almost all of your videos & really appreciate you sharing your knowledge 🙏🏾
I am just starting out & I am slightly confused about the concrete mix! I've read up on what needs mixing together and I was under the impression that sand needs to be mixed in with the concrete?
Could you please advise on what is the easiest & most cost-effective way for a perfect mix?
I'm in the UK and I've been looking at the blue circle snowcrete, but not sure if white sand & which white sand should be added!
I did a test run with some moulds & used 4 parts concrete & 6 parts sand 😅 they turned out solid with a few air bubbles 🫧 but I'm not sure I did the mix right! It's going to take practice!
Thank you so much for watching! The product that I use is cement premixed with fine sand. I am not the most keen on formulas. I would suggest checking out UpVibe here on TH-cam. Jai has amazing videos with lots of other formulas besides just what I use (cement-all).
Hi hope ur well ,I have a question i made white cement octagon tiles (coasters) and drew on them with aclyric paint , how ever while in mold i kept them in at least a whole hour , and after painting it and sealing it i kept it 2 days and so , in my conclusion the sealer isnt the best option what happend is after i wrapped them in paper n bubble wrap, we unvield them and they were wet like small layer of water what could be the reason? I do live in a more humid weather..
Thank you so much for the great video. Just wondering, do you ever have any issues with the vessels cracking while the candle is burning?
Thanks for watching! No, I’ve never had any cracking issues.
@@calafiacandleco hey this is awesome I can’t wait to try... when the concrete is in the mold how long do you let them sit to dry?
@@healingvshurttarot Just until the mold is no longer warm to the touch. It varies depending on what your temp and humidity is like. For me, it's usually 3-4 hours.
Have you thought about swirling in some green metallic paint for the monstera leaves? I bet it would look fun.
Girl…your comments are 🔥!! You have so many great ideas!
@@calafiacandleco your videos inspired me!!!
very nice jars
Hello again 🙋🏻♂️where can I find those molds and the vibration machine
I had been thinking about creating my own candle vessels and I so thankful to have found your TH-cam. Among others artist things. I'm also a soap maker and have been searching for a soap mold. May I inquire where you found yours? TIA for you response ❤
Aw thank you! Absolutely. I have it linked in the description towards the very bottom in the “miscellaneous” category.
@@calafiacandleco thank you 😊
Nice! Tyvm. Blessings.
Weird question I know but how porous is this mix? For instance if you pour water in one of the jars, how fast will it drain through the concrete? Thank you for the video!
Thank you for this video! About how long do you wait before you remove the cement from the molds considering they are not fully dried?
Ah sorry for replying so late! I wait until the mold no longer feels warm to the touch, as that's a sign that it's ready to demold. Typically for me that's anywhere from 3-4 hrs, but it can vary depending on the climate where you live.
Bonjour, j’ai une question. J’essaie de réaliser des bougies en ciment/béton en Belgique, mais lorsque je coule ma cire ou lorsque ma bougie brûle mon récipient en ciment se fend, savez vous pourquoi? Est ce parce que je ne scelle pas mon pot en ciment? Si oui, puis je utiliser un vernis acrylique? Merci pour votre aide!
Did you put colorant in the leaves? Thank you
Hey!! I’m from Greece and we doesn’t have Rapid Set-Cement all . Can we create with another brand (isomat) cement ?
Whatever you use, you just need to make sure it is cement + an aggregate. For example, cement-all is cement + fine graded sand making it a concrete.
is the cement same with the cement we use to build a house, im new huhuh
Sort of…the product I use “cement-all” is more of a repair and grout cement. It contains only cement and fine sand. I’m no expert, but for building houses I would think you would need concrete that has an aggregate in it, like rocks.
Love it!
May I ask what kind of cement do you use, is it a mixed cement?
Hey there! I use cement-all, which is cement + fine sand.
Wow ......☆☆☆☆☆♡♡♡ so happy I came across your video
Hi, I made one and once I light the candle, it crack, do you have any thoughts about this?
There can be a few reasons. Too much water in your mixture, not the right mixture, too big of a wick, the jar wasn’t dry enough… just all part of the trial and error process.
❤Thank you. All I need
Hey! Great videos! Is there a reason you don't use the Direct Color pigment anymore? Or do you?
I do for colors. But for the charcoal I use the iron oxide just because that’s what I’ve always used.
hey, first of all i love what you are doing bravo! I'm sorry to bother you, I have a problem with my concrete pots. When I pour the mixture into the mold I have a lot of water that rises to the surface and yet I have tried several consistencies... do you have an idea of the solution? Thanks very much A French subscriber 😉
Hello! Thanks so much for watching. Hmm...whenever I've come across that issue, it was because my mixture was too watery. Not sure what it would be other than that.
Love those
Love love! With respect to the black oxide getting on your hands, do you wash the vessels then? Thanks!!
Thank you! I do not. When you unmold them, they are still damp and not fully dried. Once they dry it shouldn’t transfer.
Just saw a guy using a drill with egg beater to mix his cement. HD carries cement all. Have you tried quikrete 60lbs bags? Or any other types of cement?
When I first began making concrete jars I tried quikrete and it did not work. It crumbled when I unmolded. I really recommend cement-all.
Thanks for the content it informative
please what kind os sealer do you use?
Bravo pour vos tutos! j'aimerai savoir où puis-je trouver vos moules bleus? Merci beaucoup.
Beautiful!!! with you being an experienced concrete vessel maker in your opinion, is there a way to make the vessel have a matte chalk look?
Hmm I would say whatever mold you use, make sure it's not a resin mold as though can make the concrete come out shiny. If you leave the exterior unsealed, it appears pretty matte in my opinion.
Hello, this is a successful video.
I have a question: do you use only cement for the manufacture? Or do you still mix in sand or something similar so that the mold hardens? I tried it exclusively with cement from the hardware store, but it was unfortunately very porous after drying.
Regards
Christopher Wolf
Hi thanks for watching! Even though the product I use is called “cement-all”, it’s actually concrete. It’s premixed with fine graded sand. If you’re using plain cement, you definitely need some kind of aggregate mixed with it.
I just recently started making containers. I'm finding that my cement all is setting faster than I can pour it. Am I not adding enough water? It's the right consistency when I start to pour.
Hi there! This has been happening quite a bit to me. I talk about this more in my most recent videos, but I've been getting inconsistent bags of cement-all. It starts to set up really quick. I've found that adding "flow control" by the makers of cement-all helps a ton. If you check out my in-depth concrete candle jar tutorial a few videos back, I discuss flow control and how I use it.
Thanks so much for your videos ! Wondering...do you seal your soap dish ?
After this video, I have yet to revisit the soap dish! haha! The sealer I use for everything else is water-based, so I figured it wouldn't last long on the soap dish.
does the varnish make the concrete scratch resistant?
I wouldn't say it completely prevents scratches. It does help though.
Thank you for taking the time to share :) So I’m wondering after sealing, can these also be like coffee mugs too? If we seal it’ll be okay?
Oh and I use cement all but it’s so dark. Any recs for white cement ?
I would’ve advise using them for drinking or eating purposes. Maybe you can if you find a specific sealer but idk. I have a video about adding titanium dioxide to the cement-all which lightens it.
@@calafiacandleco thank you! I have to remind myself this isn’t pottery. But should be decor only. Thank you for the response and taking the time. I already make decor candles but really want to make my own dishes and vessels - creative and saves $
Can you tell me how you seal the concrete trays and keep the matte finish. I tried some sealers but they are shiny and didn’t like that look. I really liked your which look more matte. Thanks love all of your videos.
I currently use the Earth Safe Finishes matte varnish for my trays. It still leaves a bit of a sheen though.
Thank you for this informative and easy to follow video! Wondering what height your mold is, thank you!
It’s 3” tall
Awesome video really excellent
Thank you! I appreciate it :)
Do you use a oil release agent on your molds before using? If so, what do you use and how? thanks
Hello! No I do not
That’s great thanks a lot . I have a question did u mold after a day ?
Hi there. Do you mean unmold? I usually wait 3-4 hours. It’s ready to come out when the mold is no longer warm to the touch.
Love thse projects! Would love to know if a seal is required for the soap dishes? 🥰
You know, that is a great question and part of the reason I gave up on the soap dishes haha! With them constantly getting wet, I wasn't sure what sealer would work best and not wear off. I never really revisited them after this video.
do you use any sealer after it?
Have you ever used hempcrete for your candle vessels?
I have not!
The leaves are amazing. If I can “get it together “ 🙄, I want to make a rhubarb cement leaf for a water dish for critters. The deer, and night creatures used to drink from the doggie pool.
That’s an excellent idea! “Night creatures” 😂 I love that
Wow, I really love the soap dish! With the sealer you are using, it's okay to get the cement wet??
Thanks! I actually have been meaning to look for a different sealer than can work with the soap dish. The sealer I use is water-based, which would definitely not last long at all with a soap dish. I need to research that a bit more.
@@calafiacandleco Thanks for answering! Yeah I'm wondering what would be the best sealer for soap dishes. The search continues!
Hi there can you recommend a concrete that I can make my table lamp base from ?
You should be able to use when I am using in this video, Cement-all.
Hi! super loved your videos its amazing, easy and fun to watch. Just want to ask on your concrete jars do you cure it and put sealer (semi-gloss or matte) before pouring the wax?
Thank you :)
Thank you so much! I definitely seal. I actually have a video all about sealing. Thanks for watching!
@@calafiacandleco Alright will watch that this is actually my first video of you to watch. what about the curing i read on the article and watch on diff video to cure it for 5-7 days do you do it also?
@@Syiaco18 I usually unmold them after 3-4 hours and let them sit for 3 days. Then seal. Then sit another day or two. Then fill with wax.
@@calafiacandleco Thank you so much for the tip and you reply quickly I LOVE IT!
Hola apenas encontré tus videos , son geniales me gustaría saber ¿porque usar agua destilada y no agua regular del grifo
Hello! Thanks for watching. I was getting water spots on my vessels from using tap water, so I switched to distilled and it hasn't been an issue. I know some people use regular spring bottled water or filtered water.
@@calafiacandleco Muchísimas gracias ☺️
Hi, I’m wondering how you can get all white for the color of cement? I know you use titanium dioxide to lighten it but have you ever made a true white one before??
Hey there! I haven't made a true white with cement-all. You can add up to 5% of pigment powder before you start possibly compromising the integrity of your vessel. I haven't ever added that much, so I'm not sure how white the outcome is.
I just felt in love over here in Prague with your videos and decided to change my life and start concrete candle bussines :). I have seen so many videos but you are definetly the best inspiration. I just would like to ask you how long does it take to dry the candle pot? Especially the one with pigment. We do not have the Cement All over here so I mix Portland and sand and it takes almost 15 hours to safely unmold them. Those with the pigment even longer..and they get more fragile also. Thank you!!! :)❤
Aw thank you!! I typically give my jars 3 days to dry out before I move on to the next step, which is sealing them.
@@calafiacandleco Thank you :), and how many hours doest it take to dry in the mold before you unmold them specially those with pigment please?
@@lucierocarkova5732 usually 3-4 hours. You want to make sure the molds no longer feel warm and then they’re ready to come out
hello iwanna ask, where i can find the tosca mold?
why your jars dont crack or have pours on them ?
Suggestion for the leaf trays: You could try setting them on an old cookie sheet before pouring. That way once you've poured the concrete, you can give the sheet a little shimmy to level it out and light taps on the floor to release air bubbles. Just a thought. Thanks for your content, it's super informative!
I do this with my coasters! It does work very well. I’ll have to try it with the leaf ones. Thanks for watching! 🤍
where can you by the moulds? I mean the containers holding the cement liquid.
Hi there. These are from modern craft labs
Tudo muito lindo onde compro esses moldes sou do Brasil Petrópolis Rio de janeiro
How do you make them in bulk easily?
hi Bree, what made you choose this particular size mould? im tossing up between the 3 inch tall and 3.5 tall size, did you try the 3.5?
Just personal preference. I do have one 3.5” tall mold. I like that one, as well. I was just looking for around an 8oz filled candle for my signature jar.
Hey i have a question. I keep getting these white dots on my vessels. Im currently using tap water for the mixture. Do you think the problem is the water or maybe im not mixing properly?
It could be the tap water. Are you experiencing the dots without adding any pigments or paints?
Hi , were Can i but those silicone molds with the plastic to keep the shape ?
I have them linked in the description box.
Im learning more all the time. My big issue is finding the proper cement/concrete? I hear that only use product that says, concrete not just cement?
That is true in a way. You can use concrete, as it’s already a mix of cement + sand + an aggregate. Cement on its own won’t work. You would need to add at least sand to it. Possibly an aggregate, too.
Did you use a release agent before you poured? If so what did you use?
No, I’ve never used one of those.
Can the vessels be reused once the candle burns?
They absolutely can!
Thank you and please answer a question: Cement is just a bonding agent. So why don't you use sand?
Hi there. I use cement-all, which is cement pre-mixed with sand
@@calafiacandleco That makes sense, thank you. Is "cement-all" a name of a brand or what is this "all" for? :) Sorry if the question looks silly, I'm not an English native speaker.. And what brand do you use?
@@Jake-Curious yes it’s the brand :)
@@calafiacandleco Nice, but I am not able to find it in the UK... Could you advise an alternative, please? Also, please advise on how do you paint your concrete - do you use colourants for grey cement and do, actually, use grey cement, or you use white cement when want to make colourful pots?
I thought concrete was porous. Wont it be easier to crack? They look beautiful
It is porous, but you’re still able to use it to create pieces.
Fantastique where can i buy those molds? And the machine for bubbles ? 😊
Hi there. The molds are linked in the description. They're from Modern Craft Labs. The machine is linked in my Amazon storefront.
I forgot to ask my question🐝 Are you making lids? Do you design dust covers for these? Thank you for sharing your knowledge and experience with us. We appreciate you more then you’ll ever know💕
-Jojo Wireback Candle Co.
I do not use lids. I design dust covers on canva and print them out using my Cricut. I would make a tutorial but i don’t even know how I got it to work on the Cricut 😂 I don’t think I could explain it again
I love your videos where do you sell your products please
Hello I sell online at www.calafiacandleco.com
love your stuff!! I tried to do it but my jar have hairline crack on it. :( how can I fix this and why ?
Hmm ... I would guess either your mixture is too watery or the concrete you're using isn't working.
You used just cement? No aggregates? Or did you use a concrete mix?
Hello I use cement-all, which is cement + sand
Im just wondering what do you use to seal the concrete soap dish? Thank you
I set the soap dish aside for now for that reason. The sealer I use for everything else won’t work since it’s water based. I need to research a different sealer for the soap dishes.
just curious are your labels permanent adhesive? I was wondering if your customers wanted to remove them easily or not?
They are not permanent. I’ve been able to remove them pretty easily
How can we protect cement jars to break? Our one out of ten jars broken after melting wax.
Are you using just cement? Or are you adding anything to the cement? Also too much water in the mix can cause them to be weak.
So looking into things I am wondering if cement all is a gray or white base, when buying colorant it ask u what your base is.. I went back to check I'm guessing the cement all is grey but it looks white in your video
You are correct! It’s grey base.
Hello how r u.i need your answer that my question is can I use any type of cement for candle jar making?
Hi there. It takes some research and testing to find a mixture. You can't just use cement. You need cement + something else, whether it be sand, or another aggregate. I'm not the most versed on creating my own mixture, as the medium I use (Cement-All) is cement premixed with fine sand. I would recommend checking out some videos on UpVibe Candle's channel. Jai has awesome videos regarding this.
@calafiacandleco
Thank u 💓
Do you happen to know how to make concrete food safe? Would love to make shot glasses/mugs!
I don't, I'm sorry!