@@imagineengine I believe I got the gambrel from Dicks, the hoist from harbor freight. It’s really held up and still working. Between myself and hunting buddies have skinned a lot of deer on it.
I'm here researching this hoist because I need it to lift my Honda HRX217HZA walk behind mower onto my work bench. Honda mowers are notorious for being heavy, plus it's got a 20lb striping kit on it and I just don't feel like throwing my back out trying to lift that thing off the floor every month. So I think this will be perfect for the job.
@@EveryonesOutdoors Not yet. I was waiting for the mowing season to get a little closer, and to build up some cash. Between the small paychecks due to weather, and the terrifying heating bills, thank you weather, I'm running a bit short right now. But I'll have it by the end of February.
I'm going to get one to lift my riding lawn mower on the front with straps. Its a pain in the ass always dropping mower deck everytime I want to clean the underside of deck and take blades off to sharpen.
@@EveryonesOutdoors The one I'm getting has a 850# capacity. Should lift it no problem. I'm just lifting the front end of a zero turn lawn mower where the engine is in the back. Most the weight will be on the rear tires which will be on the ground.
Bought the 440 pound hoist Pittsburgh from Harbor Freight gonna use to lift my doors so they won't fall on floor and the hood but now have to find a way to attach it to the hood.
What sized lag bolts are these? The one that comes on my hoist are threaded and I’m not sure on the size I need if I mounted it flush like yours is. Thanks
About Me Life I thinks it would be just fine as long as you made a small roof to keep direct weather off of it. Wouldn’t take much just a slab of plywood
@@EveryonesOutdoors did you remove the housing and drill the holes? If so did you mount the housing then attach the unit or attach the unit to the housing and then mount it.
I was questioning your mounting of the hoist with lag bolts but that should be plenty for deer. In fact I just put a lift in my barn and my son came by and he is going to put one in his barn for processing deer.
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
awesome! man I love harbor freight!
cool video man. Where did you get that Gambrel hook thing?
@@imagineengine I believe I got the gambrel from Dicks, the hoist from harbor freight. It’s really held up and still working. Between myself and hunting buddies have skinned a lot of deer on it.
this is exactly what I could have used this weekend for my deer!
It’s been good worth every penny! Build it .
I'm here researching this hoist because I need it to lift my Honda HRX217HZA walk behind mower onto my work bench. Honda mowers are notorious for being heavy, plus it's got a 20lb striping kit on it and I just don't feel like throwing my back out trying to lift that thing off the floor every month. So I think this will be perfect for the job.
Heinzkitz Velvet did you try the hoist ? I hope this would fit your purpose.
@@EveryonesOutdoors Not yet. I was waiting for the mowing season to get a little closer, and to build up some cash. Between the small paychecks due to weather, and the terrifying heating bills, thank you weather, I'm running a bit short right now. But I'll have it by the end of February.
I'm going to get one to lift my riding lawn mower on the front with straps. Its a pain in the ass always dropping mower deck everytime I want to clean the underside of deck and take blades off to sharpen.
I’m sure it would lift one side
@@EveryonesOutdoors The one I'm getting has a 850# capacity. Should lift it no problem. I'm just lifting the front end of a zero turn lawn mower where the engine is in the back. Most the weight will be on the rear tires which will be on the ground.
Bought the 440 pound hoist Pittsburgh from Harbor Freight gonna use to lift my doors so they won't fall on floor and the hood but now have to find a way to attach it to the hood.
What sized lag bolts are these? The one that comes on my hoist are threaded and I’m not sure on the size I need if I mounted it flush like yours is. Thanks
I honestly can’t remember but I think they were just at the 1 1/2 length
I drilled my own half inch holes
@@EveryonesOutdoors hmmm ok thanks man I appreciate the help
@@rippinlips4543 they may have been a 1/4 now that I went and looked
@@EveryonesOutdoors alright no big deal I just wasn’t sure since they were threaded how you did it but if you drilled them out then it makes sense.
Just seems like a great idea I wonder would it be a good idea to do one like this but for outdoor?
About Me Life I thinks it would be just fine as long as you made a small roof to keep direct weather off of it. Wouldn’t take much just a slab of plywood
So just 4 bolts in to the wood?
Can this work on just bolting on a trailer wood floor. No weld needed? Just to pull up garden tractors.
Vin- R I think if you through bolted it and the trailer boards are thick enough it would work for a lawn mower that was in neutral very easy
So why no video with a deer ? It’s been two year man !
Would you happen to know how to get the winch to release the cable mechanically, in order to untangle it?
I haven’t had that issue yet and I don’t know to back it off manually. It’s like it has a brake
Well done man, i defiantly want one.
L#G D#G thanks for the comment, it’s really be a great investment!
What is that triangle thing called that distributes the weight
Gambrel
How did you attach it to the 2 boards
Lag bolts
Drilled holes for the bolts also
@@EveryonesOutdoors do you drill through the metal with it attached to hoist or does the part you drill through come off
@@frankspivey5199 I drilled through the housing on the hoist
@@EveryonesOutdoors did you remove the housing and drill the holes? If so did you mount the housing then attach the unit or attach the unit to the housing and then mount it.
6:58 stuff we'd like to see?
How about it actually working???
aguyandhiscomputer I do have another video which may help if you look through my video library. Thanks for the comment! This hoist has worked great!
Can you turn the volume up
I was questioning your mounting of the hoist with lag bolts but that should be plenty for deer. In fact I just put a lift in my barn and my son came by and he is going to put one in his barn for processing deer.
JIM ECKENRODE I’ve used it with no issues, thanks for the comment
I’m getting one!
Why did you mount the board on the backside? Thanks.
I need the weight distributed between my ceiling joists
Cost efficient
Interesting thing is, uh....fuck!
Πόσο κσνει
Omg! Just shoot me and hook me up to the hoist. WTH was the point of this video?
FatSchwab Yeah this video sucks !
Video helped me a lot. Im lifting a deer 13 feet so I need to mount it so I can reach the switch
Only an idiot would install a hoist to timber.