I have the Spartan and M41. A little advice on both - If you notice water inside of the hull after running and you're not preventing it from coming in for whatever reason....Hood leaking, motor cooling jacket has too much water pressure. Then most likely there is water inside motor and will not dry out like on mine. The best thing is taking motor out and apart to dry plus the motor bearings need to be monitored for play on all your brushless motors.
Issues with Blast cavitating. Appears to have all power, but will not get up to speed. I have followed troubleshooting advice via Traxxas, but nothing seems to work. I have checked the prop...no issues. Worked with the trim...no change. Anything that I am not thinking of..?
I put my Proboat Stealthwake(brushless setup) in the ocean. It was awesome. Did not flush it well. Sat up for a few months, basically everything was ruined except ESC. Learned my lesson.
I just ran my m41 in saltwater and pretty much the moment i took it out i ran clean water through the cooling system before the hot electronics dried the saltwater in there and then i used wd40 to push whatever water was left out and hit the line with air gently. Soaked everything else metal with it as well, all the stuff in the rear and bearings so far so good.
I’m having trouble removing my flex shaft on my m41. I’m sure what I’m doing wrong..do I need to remove the entire motor out in order for the flex shaft to easily slide out??
You should only need to loosen the two halves of the collet and remove the black cover. This should allow you to pull out the cable from the rear by pulling on the propeller (make sure the batteries are removed before going near the propeller). If there is still an issue please call us at 1-888-TRAXXAS (US) or e-mail support@traxxas.com
Question my m41 widebody has an issue I believe I turn on receiver first then plug in 2 fully charged 3 cell lipos it does it’s sounds green light to indicate voltage drop but theres a blinking red light in we’re the receiver box is at if that accounts to anything boat is on its stand mind you but when I pull throttle our steering wheel our any of the switches nothing happens also this boat is new I have never ran it I tried but all this happened can anyone please help thanks do I need to recalibrate perhaps iam lost
Sounds like you need to reconnect the transmitter to the boat. But it's been 3 months since you posted this so I'm wondering if that was the fix, and if not what did the problem end up being?
Hello guys. The propeller cable of my Spartan just broke, the boat lost the propeller in the middle of the lake. Brand new, first use. Any idea why that happened? 😢
Rip bro... did you grease everything first or did you run it out of the box? If you ran it out of the box before greasing anything that's what killed it. Every 15 min is crazy...
Fishing pole with a weight cast to the backside and slowly reel in over and over until you get it to hook and definitely slowly reel in take it easy when you're out far but when you're near the shore give it what it gots and do not turn until you slow way down and turn the QT I believe all the way off the thing that helps you to control is horrible to have on especially at high speed it will start trying to turn and correct and say bye-bye make sure your batteries are strapped in really good use all the velcro on it I put my batteries all the way forward to help with the Wheeling and change the pitch of your prop a little downwards to force the nose down just a tiny bit
What do you call the tiny rubber bit that is on the stuffing tubing? Mine broke off after the 2 or 3 time I ran it. I need to put another piece of plastic on there because I feel like water is getting inbetween the tubing and the drive strut. I know it is. I've been putting a piece of tape around the tube and the shaft to try and keep water from pushing in, but are there slamm plastic tube piece you sell? Maybe I'll just find some plastic tubing that fits over the aluminum tube at the local hardware store
Sounds like it might be part #5725 - traxxas.com/search?keyword=5725 If it is a Spartan or M41 check out the exploded view to see which piece it is: traxxas.com/explodedviews/DCB-M41-Widebody-57046-4-Chassis-Assembly traxxas.com/explodedviews/Spartan-57076-4-Chassis-Assembly
You should make a more waterproof hull !!! Also have the Spartan !! It kept shutting down , till I replaced some electronics!! Proboat makes 10 times better rc boats!!
IM SAVING UP FOR THIS SAAAME BOAT,,,AND IM ONLY GOMNA RUN IT ON DUEL 2CELLS=4CELLS! INSTED OF 6S!!(BECAUSE THE OOONNLLYYY TIME IM GONNA DO(ALLLL OF THE CRAP) IS WHEN IT MIGHT BE SITTING FOR A WHILE BUT THATS IT
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
I have the Spartan and M41. A little advice on both - If you notice water inside of the hull after running and you're not preventing it from coming in for whatever reason....Hood leaking, motor cooling jacket has too much water pressure. Then most likely there is water inside motor and will not dry out like on mine. The best thing is taking motor out and apart to dry plus the motor bearings need to be monitored for play on all your brushless motors.
It’s funny how they single the blast out
Fr. I just bought it and I’m trying to figure out if I need to grease the prop shaft or not, and how to take it out if I do
First thing you want to do is get a dual pickup to cool everything down heat kills
I have both. I love them both. Two very different handling boats both just as much fun as the other
But I keep having problems with the shaft and couplet.
I love how you let the electronics cool in the sun 👍
Stfu
At least you do good reviews on how to do pure traxxas maintenance.
I really want a M41 widebody
Is is very cool and fast
I got it’s awesome
I just got one too it’s awesome , the only thing is the plastic is abit light... I guess a vinyl wrap will make it a lil durable.😎
Then just buy it
And the advantage of it been light is it really zippy I use zee 9000mah battries and have half hour running sessions out of them I got 4 sets
Doesn't WD-40 disperse grease and oil? Wouldn't this remove the oil from the bearings?
Boo Ya even they dont know that wd 40 in NOT a lubricant its a solvent
Erik Silchuk yes but wd40 is Leo water displacing which is why they recommend it
photography on the cheap regular oil displaces water too
Agghh - wd40 is evil! Use oil for toy trains or AC fan motors!
For a multi million dollar company they sure are stupid
Theses are great boats
Issues with Blast cavitating. Appears to have all power, but will not get up to speed. I have followed troubleshooting advice via Traxxas, but nothing seems to work. I have checked the prop...no issues. Worked with the trim...no change. Anything that I am not thinking of..?
Traxxas top!!!
what about sea water? if some go inside electronic stuff we need to wash the inside of the catamaran with water before maintenance? thanks
@Daniel Nunez am I able to use it in salt water though? Someone told me it will mess the boat up right away in salt water
I put my Proboat Stealthwake(brushless setup) in the ocean. It was awesome. Did not flush it well. Sat up for a few months, basically everything was ruined except ESC. Learned my lesson.
I just ran my m41 in saltwater and pretty much the moment i took it out i ran clean water through the cooling system before the hot electronics dried the saltwater in there and then i used wd40 to push whatever water was left out and hit the line with air gently. Soaked everything else metal with it as well, all the stuff in the rear and bearings so far so good.
Isn't lithium grease also from WD better for the bearings of the motor ?
I have always used Marvel Mystery ( drops / spray ) oil :) super effective and Lubes everything :)
What about the blast!!!! Mine crapped out after 4 runs and i did not see anything covering the blast in the video
Master Chief That’s because theirs crapped out too. 😂
What is blast ?
Cagsan Ozbek traxxas boat
I’m having trouble removing my flex shaft on my m41. I’m sure what I’m doing wrong..do I need to remove the entire motor out in order for the flex shaft to easily slide out??
You should only need to loosen the two halves of the collet and remove the black cover. This should allow you to pull out the cable from the rear by pulling on the propeller (make sure the batteries are removed before going near the propeller). If there is still an issue please call us at 1-888-TRAXXAS (US) or e-mail support@traxxas.com
Question my m41 widebody has an issue I believe I turn on receiver first then plug in 2 fully charged 3 cell lipos it does it’s sounds green light to indicate voltage drop but theres a blinking red light in we’re the receiver box is at if that accounts to anything boat is on its stand mind you but when I pull throttle our steering wheel our any of the switches nothing happens also this boat is new I have never ran it I tried but all this happened can anyone please help thanks do I need to recalibrate perhaps iam lost
Sounds like you need to reconnect the transmitter to the boat. But it's been 3 months since you posted this so I'm wondering if that was the fix, and if not what did the problem end up being?
@@Youtoobsucksnow yeah I just needed to bind the transmitter
Good video 👍
Hello guys. The propeller cable of my Spartan just broke, the boat lost the propeller in the middle of the lake. Brand new, first use. Any idea why that happened? 😢
Rip bro... did you grease everything first or did you run it out of the box? If you ran it out of the box before greasing anything that's what killed it. Every 15 min is crazy...
Are the batteries suppose to get wet ? Most runs they get wet and ones already puffing , it's a traxxas battery too
Warranty.
Also are you storing them charged.
If ur afraid of getting the lips wet use some electrical tape around them to keep some water out. Also don’t store them charged.
Just got mine yesterday and am scared of running and flipping it as i will have no way to recover it any ideas ?!
Get a cheap other rc rescue boat
Deez louize still in the original box till this day lol
MyDyingBride A small one person inflatable boat 🚣♀️ works.
Fishing pole with a weight cast to the backside and slowly reel in over and over until you get it to hook and definitely slowly reel in take it easy when you're out far but when you're near the shore give it what it gots and do not turn until you slow way down and turn the QT I believe all the way off the thing that helps you to control is horrible to have on especially at high speed it will start trying to turn and correct and say bye-bye make sure your batteries are strapped in really good use all the velcro on it I put my batteries all the way forward to help with the Wheeling and change the pitch of your prop a little downwards to force the nose down just a tiny bit
Swimsuit, strangers and law enforcement don’t like it when people take their clothes off in public
Speed Controller can receive a battery pack.
What do you call the tiny rubber bit that is on the stuffing tubing? Mine broke off after the 2 or 3 time I ran it. I need to put another piece of plastic on there because I feel like water is getting inbetween the tubing and the drive strut. I know it is. I've been putting a piece of tape around the tube and the shaft to try and keep water from pushing in, but are there slamm plastic tube piece you sell? Maybe I'll just find some plastic tubing that fits over the aluminum tube at the local hardware store
Sounds like it might be part #5725 - traxxas.com/search?keyword=5725
If it is a Spartan or M41 check out the exploded view to see which piece it is:
traxxas.com/explodedviews/DCB-M41-Widebody-57046-4-Chassis-Assembly
traxxas.com/explodedviews/Spartan-57076-4-Chassis-Assembly
I flush myn after every run too
You should make a more waterproof hull !!! Also have the Spartan !! It kept shutting down , till I replaced some electronics!! Proboat makes 10 times better rc boats!!
John Sneen quit your whinnin’ John.
Nah Traxxas is way better
@@DeaganZ3488 ok !!! Troll
Is this pro boat?
You do realize this is a traxxas video? Right?
cool
Should i push the prop whirr all the way in after greasing?
no
IM SAVING UP FOR THIS SAAAME BOAT,,,AND IM ONLY GOMNA RUN IT ON DUEL 2CELLS=4CELLS! INSTED OF 6S!!(BECAUSE THE OOONNLLYYY TIME IM GONNA DO(ALLLL OF THE CRAP) IS WHEN IT MIGHT BE SITTING FOR A WHILE BUT THATS IT
first
Sorry Traxxas, you make great RC cars but your boats....
Are awesome
12th