Bhai Maine APM2.8 flight controller khrida hai... Isme Acel Calibration fail ho raha hai... Mission planner ka use karke calibration karne ka kosis kar raha hu... Jaise hi process start karta hu bolta hai "Place drone at level and press any key", mai key press kar raha hu but kuchh nahi ho raha hai... And Calibration FAILED dikha raha... Please help
But bro I got apm 2.8 board yesterday....bahut sare TH-camrs se pucha tha but kisi ka jawab nahi aya tha..isiliye Maine apm purchased kr liya...as a begginer mujhe better stablility cahiye tha...so will purchase tarot later...pls apm ko progaramming ka ek video bana do jaldi se bro...pls help..b.coz.i like your videos bro...thank you
Bro do you know why the throttle is not responding when the battry is low. I have apm 2.8. When battry low its not flying but the motors are spinning up randomly and not responding even the throttle is down. Pls help
bro.. Great Fan of u .... there is prblem that my apm is not connecting to mission planner. timeout is coming frequently can u plz help with this issue i have never miss any video of urs... soo plz help. And Thank You For such wonderful videos.... GBU
Bro u need to go in contol pannel and then go to the device manager and then know which port is connected with the apm and then go back to the mission planner and change your port.
bro on connecting my USB cable to the board the light just blinks twice on AMP 2.8 and goes off and am unable to connect even the the mission planner software.
I have used the APM 2.8 to my quad.i tried to flight it after arming and throttling the quad started doing haphazard manner. I used only APM without GPS.
Bro not arming in apm 2.8 gps hdop and need 3d fix but after ESC calibration the drone is rotating it all 4 propellor but not flying only vibrating solve please
My quad with apm2.8 is not lifting off motors rotate at diff speeds and go out of control and have a huge thrust at full throttle and then also it does not lifts off I am using alt hold mode without GPS I have done ESC Calibiration
I'm facing the issue... How did you fix it?? I broke my head with innumerable calibrations but still crash it all the time and have given up... Probably a whatsapp no you use will be very helpful
Siddarth Gopinath I used the older version of apm before the one with inbuilt compass but then I used the newer version the one in which we have to use the gps compass and I also changed all the esc and please don’t buy the products from fly Robo it’s the worst site from which we can buy all this stuff instead try getting it from a local vendor
Bhai help kr doo mission planner mee flysky fs-i6 ka signal show heee nhi kr rha h in radio calibration and flight modes bhi gayab hoo gya kuch help kr do... Aur mere company web development ka kam krti h joo help kr ke fly krwa dega uske liye ek free website
Open please may ja key compass calibration karow and i2c pin gps port key nichye wa ley port my da lo or open place may calibration karow or thoda wait karow
![[LIVE] : ONE ลุมพินี 85 | คู่เอก "ยอดเหล็กเพชร vs ผึ้งหลวง"](http://i.ytimg.com/vi/Qq_19bnnxEo/mqdefault.jpg)
Bro can we fly quadcopter using apm2.8 fc without gps ?
This Is long process so If You Have Time So call me number is in disc...
Yes
Bhai Maine APM2.8 flight controller khrida hai... Isme Acel Calibration fail ho raha hai... Mission planner ka use karke calibration karne ka kosis kar raha hu... Jaise hi process start karta hu bolta hai "Place drone at level and press any key", mai key press kar raha hu but kuchh nahi ho raha hai... And Calibration FAILED dikha raha... Please help
Bro i am not using power module i am using esc power any proplems i will face or not
Bhai ma tumhari website se apm with gps kharidna chata hu or ma punjab me rehta hu kya app deliver karde ge and cod available hai.
How I know it's 2.6 or 2.8
And plz tell me about jumper connections
But bro I got apm 2.8 board yesterday....bahut sare TH-camrs se pucha tha but kisi ka jawab nahi aya tha..isiliye Maine apm purchased kr liya...as a begginer mujhe better stablility cahiye tha...so will purchase tarot later...pls apm ko progaramming ka ek video bana do jaldi se bro...pls help..b.coz.i like your videos bro...thank you
i will make video
Bro do you know why the throttle is not responding when the battry is low. I have apm 2.8. When battry low its not flying but the motors are spinning up randomly and not responding even the throttle is down. Pls help
Sir I'm facing problem of URI is empty what should i do there is no solution on internet
Plz sir reply fast
Bro please help me i have made apm2.8 Quadcopter but first time it fly stable. But 2n time drone is not arming
bro.. Great Fan of u .... there is prblem that my apm is not connecting to mission planner.
timeout is coming frequently can u plz help with this issue
i have never miss any video of urs... soo plz help. And Thank You For such wonderful videos.... GBU
Please download 1.3.40 mission planner . It have driver files which required to contact flight controller to planner
Bro u need to go in contol pannel and then go to the device manager and then know which port is connected with the apm and then go back to the mission planner and change your port.
I was having same problem I switched to better usb cable then disconnect problem was solved
How to do gps lock please tell my gps is not locking always blu light is blinking
Bro mera apm2.8 main arm karne pe automatically moter spin hone lagti h kya problam h
bro on connecting my USB cable to the board the light just blinks twice on AMP 2.8 and goes off and am unable to connect even the the mission planner software.
Nice information
I have used the APM 2.8 to my quad.i tried to flight it after arming and throttling the quad started doing haphazard manner. I used only APM without GPS.
Hi , in mission planner, i am not able to do accelerometer calibration, after tilting left, calibration fails. any solution with anyone?
Nice info bro... programming ka ek video banao bro...
Yes bro. I will upload as soon as possible
Bro not arming in apm 2.8 gps hdop and need 3d fix but after ESC calibration the drone is rotating it all 4 propellor but not flying only vibrating solve please
Same problem
Gps no fix and can't armed why bro? Please help
Bro when ever I try to fly my drone on of its motor is not rotating, can you Help me??
My quad with apm2.8 is not lifting off motors rotate at diff speeds and go out of control and have a huge thrust at full throttle and then also it does not lifts off I am using alt hold mode without GPS
I have done ESC Calibiration
Did you solve it buddy?
Siddarth Gopinath yes I fixed it a year ago
I'm facing the issue... How did you fix it?? I broke my head with innumerable calibrations but still crash it all the time and have given up...
Probably a whatsapp no you use will be very helpful
Siddarth Gopinath I used the older version of apm before the one with inbuilt compass but then I used the newer version the one in which we have to use the gps compass and I also changed all the esc and please don’t buy the products from fly Robo it’s the worst site from which we can buy all this stuff instead try getting it from a local vendor
Brother my issue is when i am installing frame of drones it will say
Failed to discover id board
Please help what can i do ?
Upload Firmware from PC. Download it from website
@@OmHobby from which website
Bro I can't understand
Please contact me
Phone no. De de bhai nhi to or kuch bhi chalega plzzzzzzzzzz
Can we fly apm2.8 without GPS
Yea
@@OmHobby I have tried it but it will go uncontrolled in all mode
@@akarshtechshooter8193 hi
Facing same prob... Alt or stabilize mode not able to control at all and crashing and breaking props :(
Exactly. APM is already outdated flight controller
@@OmHobby I get it is outdated....
But what purchased bro.... So help me set it up
Drone auto land hojata he par mission planer me kuchh problem nahi dikhata to is me kya problem hogi ????
My friend, In Altitude Hold Mode GPS has not any functions.
Bhai muje kharab apm2.8 board chahiye ager ho to batana
when i am connecting apm 2.8 with laptop it is showing usb device not recognised.....tell me how to resolve it plz....
Recognition is missing. Please update your driver usb bus
@@MindoLab tried, but still showing same problem
Hi. I hope you doing well. I want to talk you by whatsapp. Because i cannot calibrate it. When i left side calibration is still going failed.
i am getting high gps hdop whenever i am trying to arm in loiter mode , please help
Bhai help kr doo mission planner mee flysky fs-i6 ka signal show heee nhi kr rha h in radio calibration and flight modes bhi gayab hoo gya kuch help kr do...
Aur mere company web development ka kam krti h joo help kr ke fly krwa dega uske liye ek free website
Fc2.8got shorted by connecting the power not working
Bhai bad velocity problem
what can i do??
how to activate internel compass apm 2.8(red bord).
PreArm Need 3D fix
What can I do?
Same problem
do compass calibration
sab chutiye h bhai tum fence ko disable Karo Ho jayega
@@SaurabhYadav-hr5uq fence?
Bhai how to install GPS in cc3d controller please reply
bhai please make a video
I am waiting for your video
Nice video content.
Compass calibration problem how to work
Bro it's showing Prearm:High GPS HDOP what shall I do
Same problem please solve it to get armed
Prearm high gps hdop
What can I do!!
Same problem
go in stabilizer mode
Vii take off spin problem please help
Bhai dji inspire clone making video banoo
Website is not opening
Apm 2.8 fails safe not on m kya karo
Mission planner me gps : no fix bta rha he
Arm Nahi ho Raha ha
Bad compass health Bata rha apm 2.8 me, please help me
Same problem
Apm me compass Calibration ni ho rha please help me
Solved hui ya nhi??
Bhai mere apm me gps no fix show ho raha hai
Open please may ja key compass calibration karow and i2c pin gps port key nichye wa ley port my da lo or open place may calibration karow or thoda wait karow
@@OmHobby bro open place me hi kia h fr bhi nhi ho raha hai orange light hi show ho rhi hai bas GPS no fix arha hai any solution please tell me
Your no.
Rotating fastly but not flying
Check your motor layout and check your motor direction
And fit right propeller in motor
@@OmHobby sir checked it but it is rotating motor only when doing esc calibration but not when doing it arm please help
And two more problem to arm pre arm bad velocity and high gps hdop
Mere wala mission planner software me wizard option nhi aa rha h
@@OmHobby sir propeller ka kya direction aur kaise h
Pls reply