Thank you very much! I had a flat tire recently on my back tire of my Jetson Bolt Pro and was really distraught and did not know what to do. I found this video and was initially skeptical. Yesterday I followed your instructions and this method did its wonder. Amazing! Today I just rode my bike like the flat tire never happened. The bike was balanced as before and I didn't notice anything different. Also wanted to tell you i watched most of your videos and found them very informative. Initially I bought the Jetson Bolt Pro at Costco because of your video. Really appreciated your help! The bike brought me lots of joy.
Shouldn't be skeptical as these products are used in a spray form for cars for decades. I've been using fix a flat for cars for years as it sprays a white foam into the tire that plugs up a small puncture. Try changing a flat tire in the rain in the dark. Fix a flat saved me many times. Or you can call AAA and wait for a few hours. This works in less than 10 minutes.
I really hope this works like you said it does, I have to use my bike for work and I’m freaking out and it’s my Monday so it’s gunna be a long week if this doesn’t work
@@philc.9280 fix a flat shouldn't be on the market. It ruins your tire. It works long enough to go get a new tire. You could plug the tire and still use it for a long time. Fix a flat makes your car shake until you get a new tire. So I payed $15 for fix a flat then spent $150 for a new tire because of what the fix a flat did. Could've spent $25 to plug the tire. Don't use fix a flat. I haven't tried slime because fix a flat ruined it for others
@@jasonjenkins9247 Sorry to disagree but I've used fix a flat type sprays for many years on many vehicles. The shaking goes away as the sealant spreads evenly inside the tire. You're spreading several ounces inside the tire, so the balance is off for a little while. I even had some cars that I just left the sealant inside without repairing the tire as the nail or screw was so small. It lasted for years. Of course, a big hole should be plugged or removed and professionally patched from the inside.
Hope this video was helpful. As I said in my video, I will do a tire & tube replacement video in the near future. You can purchase the slime kit used in my video here: amzn.to/33ClKcq. Thank you all for the continuous support to my channel. I really appreciate it.
I have a Jetson bolt version 1 the voltage for it is 36 and the stock battery is 36 volt 6 amp would I be able to upgrade it to a 36 volt 10amp to get more mileage and still use the same controller
@@greenxo2607 Hello, yes you can get 36V 10amp. I would recommend a 36V 14ah to get a better range. Since your bike goes faster than the new version, a 14 or 20ah would give you better value. As long as get 36V the AH number does matter, you can go as high as you like. Thanks for watching my video.
@@d.w.t.godblessed-petty9032 Then you need to replace the inner tube. You can get one fairly cheap online. 14x2.125 size. Thanks for watching my video.
Thanks Shiva ! I always look forward to watching your videos 😁. It now appears that I’ll be waiting patiently for your next video, the “key ignition switch”, before I attempt this on my own 👍🏻. Thanks for your continued contribution to this topic (jetson bolt pro).
Hi Ray, thank you very much for your kind words. My ignition key is coming in the mail this week, so hopefully early next week I can have a video out with detailed instructions.
Thanks for this video and all the others. Slime seems to have a couple of different products and one is for emergency use only, they recommend removing the product within 3 days. We have to make sure to use the product for bicycles, tubes. Etc.
Hi Christian, thanks for watching my videos. The product I have linked can be used at anytime and can stay in your tires forever. They expect the slime to last about 2 years and prevent flat tires.
Thanks Bob. I am looking for a Bluetooth as well but I actually went for a new controller. I think it goes faster but not sure how much faster. I am going to be testing it out this weekend.
Nice video Shiva. I actually have my tires tube not holding pressure well, and was under the assumption that there was a micro hole somewhere. Instead of the slime I used fix a flat instead since it's lighter and doesn't weigh the tire down as much, and at 140lbs, I wanted to make the best of my weight for speed/range. The ones at Walmart were sufficient. Right now it retains pressure for a few good hours, similar to what normal use would cause depressurization, so I can do my deliveries without issues.
@@ShivaSapkota Yes, but the instructions may need to be followed differently given the size of the tires. I shake the can for 10 seconds, insert the provided plug and press the button to inflate. Because I wanted to maximize my speed and weight I only filled the tires in an equivalent of less than 1/4; mainly wanted the tube to be lightly coated for protection against slight pricks and cuts from possible debris in the road. I may look into a heavy duty inner tube for the back tire but for now the fix a flat holds well and gives me that peace of mind. WM also sells that slime next to the fix a flat but ive been told the weight issue when its filled with slime can be problematic, and the Bolt pro has enough weight as is, lol when your battery runs out thats quite the trek home, and for my deliveries that was a no go, so fix a flat works as an light alternative.
I just bought a can of Fix A Flat now I think I want the Slime instead as it's a very large can and you can't tell how much is going in since you cant see through the can,so my question is how long in seconds should I apply to each tire? Thanks.
Good evening Shiva. I'm from Canada and I've been watching your vlog about Jetson. How do you call that toggle switch you use for two batteries. Shiva can I make a direct call to you?
Hey man, was wondering if you could make that video about how to tighten the bolt pro handle for folding because I crashed recently but there isn’t any damage but I genuinely learn better thru video idk but if you could maybe just show how in a future video please if you can but if not it’s totally fine. 🙏
Hey my friend, can you please shoot me a quick email? I will record a quick video and send your way. Can you please attach a picture on your email showing the folding stem assembly? If you are missing parts, you will need to get those from Jetson for this to work. Thank you.
@@leggomyeggo9088 I got it, thanks. I will try to replicate the issue on my bike. It looks like all the parts are still intact on your bike. I will look into this tomorrow and let you know.
Hub motor is very difficult to change and can cost you a lot. I am not sure yet when I will have the tire video out, I have so many videos to make and not enough time 😆
How do you tighten up the folding quick release, mine is very loose and I can’t figure how to tighten it so it snaps into place and keeps my bars from not folding. Would love a response!
Hello I have a question. The lock that folds the bike doesn't lock anymore, it is loose. I have to use the lock clip so that the handlebars stay straight. How can I tighten them again? Thanks.
I actually did the slime thing. It worked for about 3 days, then it went flat again. I weigh about 245. I think I might be too heavy for this. I know the specs say 260 but I don’t know how that’s possible. And it’s the back tire that went both times. It’s sad because I really like this bike.
Hi Jay, sorry to hear that you are having flat tire issues. Perhaps replace the tube? I have seen some 14" tubes in Amazon. Thanks for watching my videos.
Yeah bro u just gotta replace the inner tube! I’m 6’6” and 235lbs and I ride the one without pedals…. The same thing happened to me but I replaced it with a stronger inner tube from Amazon and applied the slime and I haven’t gotten a flat since.
@@ShivaSapkota I do but I have the regular red and black jetson bolt so the tube for the regular one is smaller than the jetson bolt pro with pedals. So I don’t think it would help you or his situation. But I can still place it down here if you’d like :)
This is 2 years ago but I’m figuring out how to use my Jetson and how to fix the tire. When I used the slime and spinned it. I pumped air and still had a flat. I can’t hear, see or feel anything. Any tips? Also this is my first time owning a bike 😂
Hey man! I was wondering if you'll do a video on installing a new speed controller anytime soon? I love my jetson but I'd like a bit more speed out of it to keep me safe at night! Anything helps man :)
Hello, I will have that video out this weekend. I am able to do about 3 more mph on my new controller using the stock battery. So, it won't boost a lot but that might be enough. I think if I get a 48V battery, it might do more.
Another great vid, Sheva. Do you feel the Slime will cause any balance issues, or is it negligible in such a small time? I’ve used Slime for car tires just to get me to a tire shop (Costco), and it definitely had a balance issue. Thanks.
I think the valve is torn from the inner tube - of my back tire - but I haven't taken it off - I don't see any puncture marks of nails. will the slime do anything.
@@nolacross704 Last Fall I rode a lot but then it is still snowing out here, so didn't get to ride too much in the Winter. I haven't been keeping track but my brake pads needed replacement. The tire tread is looking a little low on my bike. The one from the video today is my wife's.
It didn't cause any balancing issues for me. I have heard some folks saying it caused balace issues for them but they don't have a Jetson bike. Thanks for watching my video.
Yes it will affect wheel balance. Since these bikes come with no wheel balancing at all, the Slime will actually automatically balance the wheel as you ride. I use AirSoft BB's to balance car tires and Slime will do the same by distributing itself around the inside of the tire and balance the wheel. Motorcyclists and off-road truckers use balancing beads to balance their wheels. There may not be enough Slime injected into the Jetson tires to perfectly balance the wheel, but it will improve the balance, not make it worse.
Hi Allen, how big is the flat? Do you think Slime would help? If not, you can just remove the outer nuts, brake assembly and the wheel should come off. The motor is an embedded hub motor so it comes off with the wheel. You can watch my brake pad replacement video on how to remove the brake assembly. Hope this helps.
@@ShivaSapkota Air gushes out the base of the valve, quickly loses any air pumped in. Slime or bike fix-a-flat would seem futile to even try... I called Jetson, they are sending me a new inner tube under warranty. The lady was very helpful, sent a video link showing some of the process, at least on their version of this ebike without a pedal. Got some useful info too from a bike shop for how the chain gear is loosened.... I think now I understand how to get it done. Thanks for your reply, you are always so helpful!
@@TxAllen972 I am glad Jetson is being helpful. The new innertube should be a good fix. Hope everything works out for you. Thanks for watching my videos and please reach out at anytime.
@@ShivaSapkota FYI... in the end I felt satisfied I knew how to remove the rear wheel to changed the inner tube, but when I went to do it, I got stuck removing the brakes after I inadvertantly stripped the screws on it. So I took it to a bike shop, and they did the job (replacing the inner tube, and the screws too) for $20. Can't beat that!
@@ShivaSapkota just the disk. My back disk got bented and kept me from having a smooth roll. It's having friction and getting caught up with the pad due to it's uneven disc.
@@smlbcity23 What if you contact Jetson? They might send you the exact part. I forgot the measurement but something like this should work: amzn.to/2TK7a15
@@mavrolus Yes, it is the same process. Just push the tool in a little bit and turn towards the left. Sometime it requires some force while turning. Even though the back valve is bent, the inner part does come out like the front. Hope this helps.
Hello there, got a question for you. I seen the Jetson Bolt Pro advertised on Outdoor Tech. It had one of your videos attached to the advertisement. They have refurbished bikes. Do you endorse Outdoor Tech? Thanks, Rick
Hi Rick, I didn't even know about it until now. Thanks for letting me know. I allow embedding of my videos, so I guess it is okay they are using my video but they never asked me or anything. I have never purchased anything from Outdoor Tech so, no, I do not endorse them or really know about their products and services. Thank you again for telling me about it, much appreciated.
to avoid that you want to go for a ride or keep spinning the wheel right after you put it in so it doesn't all settle at the bottom and dry in a big chunk.
Voids Mercedes tire warranty if used. I'm certain it voids other manufacturers warranties too. Want to ruin your Tire pressure warning sensors/system? Put that in your tire or your neighbors tires if you dislike them.
![Ebike (Jetson Bolt Pro) Tire & Tube Replacement - Folding Electric Bike 2021 [DETAILED GUIDE]](http://i.ytimg.com/vi/9J8PMWywWvE/mqdefault.jpg)
Jetson Bolt Pro Videos: bit.ly/3jaNaRY
Electric Bike Reviews: bit.ly/3hu025b
Electric Scooter Reviews: bit.ly/3VYQrlL
Doze it work with tubeless or tube
Thank you very much! I had a flat tire recently on my back tire of my Jetson Bolt Pro and was really distraught and did not know what to do. I found this video and was initially skeptical. Yesterday I followed your instructions and this method did its wonder. Amazing! Today I just rode my bike like the flat tire never happened. The bike was balanced as before and I didn't notice anything different. Also wanted to tell you i watched most of your videos and found them very informative. Initially I bought the Jetson Bolt Pro at Costco because of your video. Really appreciated your help! The bike brought me lots of joy.
Shouldn't be skeptical as these products are used in a spray form for cars for decades. I've been using fix a flat for cars for years as it sprays a white foam into the tire that plugs up a small puncture. Try changing a flat tire in the rain in the dark. Fix a flat saved me many times. Or you can call AAA and wait for a few hours. This works in less than 10 minutes.
I really hope this works like you said it does, I have to use my bike for work and I’m freaking out and it’s my Monday so it’s gunna be a long week if this doesn’t work
@@philc.9280 fix a flat shouldn't be on the market. It ruins your tire. It works long enough to go get a new tire. You could plug the tire and still use it for a long time. Fix a flat makes your car shake until you get a new tire. So I payed $15 for fix a flat then spent $150 for a new tire because of what the fix a flat did. Could've spent $25 to plug the tire. Don't use fix a flat. I haven't tried slime because fix a flat ruined it for others
@@jasonjenkins9247 Sorry to disagree but I've used fix a flat type sprays for many years on many vehicles. The shaking goes away as the sealant spreads evenly inside the tire. You're spreading several ounces inside the tire, so the balance is off for a little while. I even had some cars that I just left the sealant inside without repairing the tire as the nail or screw was so small. It lasted for years. Of course, a big hole should be plugged or removed and professionally patched from the inside.
Your Jetson Bolt Pro inf. and upgrade and repair videos are excellent! PLEASE KEEP UP THE GREAT WORK AND THANK YOU!
Bud, your channel should be mandatory watching for any Jetson owner.
Agreee
Hope this video was helpful. As I said in my video, I will do a tire & tube replacement video in the near future. You can purchase the slime kit used in my video here: amzn.to/33ClKcq. Thank you all for the continuous support to my channel. I really appreciate it.
I have a Jetson bolt version 1 the voltage for it is 36 and the stock battery is 36 volt 6 amp would I be able to upgrade it to a 36 volt 10amp to get more mileage and still use the same controller
@@greenxo2607 Hello, yes you can get 36V 10amp. I would recommend a 36V 14ah to get a better range. Since your bike goes faster than the new version, a 14 or 20ah would give you better value. As long as get 36V the AH number does matter, you can go as high as you like. Thanks for watching my video.
Thanks for your help
If this doesn't work then what??
@@d.w.t.godblessed-petty9032 Then you need to replace the inner tube. You can get one fairly cheap online. 14x2.125 size. Thanks for watching my video.
The jetson bolt goat 🐐
You are so sweet! Thanks for your kind words my friend.
Thanks Shiva ! I always look forward to watching your videos 😁. It now appears that I’ll be waiting patiently for your next video, the “key ignition switch”, before I attempt this on my own 👍🏻. Thanks for your continued contribution to this topic (jetson bolt pro).
Hi Ray, thank you very much for your kind words. My ignition key is coming in the mail this week, so hopefully early next week I can have a video out with detailed instructions.
The way you explain things is awesome
Mahalo
Thank you very much!
Thanks for this video and all the others. Slime seems to have a couple of different products and one is for emergency use only, they recommend removing the product within 3 days. We have to make sure to use the product for bicycles, tubes. Etc.
Hi Christian, thanks for watching my videos. The product I have linked can be used at anytime and can stay in your tires forever. They expect the slime to last about 2 years and prevent flat tires.
Really helpful tutorial! Thanks so much!
Thanks Shiva for sharing such wonderful idea.
Thank you brother for this information… It worked out great and saved me some time
Great video....still looking for a bluetooth module to unlock the speed.....Thanks!
Thanks Bob. I am looking for a Bluetooth as well but I actually went for a new controller. I think it goes faster but not sure how much faster. I am going to be testing it out this weekend.
@@ShivaSapkota there's one on Amazon I dont know if it would work?
@@rdmcgreanor I tried it and didn't work for me....
Adding to the algorithum, great info as always!!!
Very tempted to do this on my Jetson Bolt. How's the wheel been since then? I got 2 flats in the first 2 weeks 😭😭
Nice video Shiva. I actually have my tires tube not holding pressure well, and was under the assumption that there was a micro hole somewhere. Instead of the slime I used fix a flat instead since it's lighter and doesn't weigh the tire down as much, and at 140lbs, I wanted to make the best of my weight for speed/range. The ones at Walmart were sufficient. Right now it retains pressure for a few good hours, similar to what normal use would cause depressurization, so I can do my deliveries without issues.
Thank you very much for the feedback. I am glad the Fix a Flat worked out well for you. You apply that product exactly the same way as Slime right?
@@ShivaSapkota Yes, but the instructions may need to be followed differently given the size of the tires. I shake the can for 10 seconds, insert the provided plug and press the button to inflate.
Because I wanted to maximize my speed and weight I only filled the tires in an equivalent of less than 1/4; mainly wanted the tube to be lightly coated for protection against slight pricks and cuts from possible debris in the road. I may look into a heavy duty inner tube for the back tire but for now the fix a flat holds well and gives me that peace of mind.
WM also sells that slime next to the fix a flat but ive been told the weight issue when its filled with slime can be problematic, and the Bolt pro has enough weight as is, lol when your battery runs out thats quite the trek home, and for my deliveries that was a no go, so fix a flat works as an light alternative.
@@edwardcephas3843 Awesome! Thanks for letting me know. This is a very helpful insight.
@Plug Walk Yes.
I just bought a can of Fix A Flat now I think I want the Slime instead as it's a very large can and you can't tell how much is going in since you cant see through the can,so my question is how long in seconds should I apply to each tire? Thanks.
Wowww, excelente, saludos Shiva
Muchas gracias Tia!
Thank you for sharing
Hello Shiva. Have a question for you. Can I add Training Wheels on this bike?
I appreciate you Shiva.
Good idea man, thx
Thanks for watching!
Good evening Shiva. I'm from Canada and I've been watching your vlog about Jetson. How do you call that toggle switch you use for two batteries. Shiva can I make a direct call to you?
Geat video idol you are the best
I've heard the flat out sealant is better than slime. How do you know how much slime you put inside? And how many psi? Thanks
Hey man, was wondering if you could make that video about how to tighten the bolt pro handle for folding because I crashed recently but there isn’t any damage but I genuinely learn better thru video idk but if you could maybe just show how in a future video please if you can but if not it’s totally fine. 🙏
Hey my friend, can you please shoot me a quick email? I will record a quick video and send your way. Can you please attach a picture on your email showing the folding stem assembly? If you are missing parts, you will need to get those from Jetson for this to work. Thank you.
@@ShivaSapkota what is your email?
@@leggomyeggo9088 sapkotatechnology@gmail.com
@@ShivaSapkota hey I sent you that email
@@leggomyeggo9088 I got it, thanks. I will try to replicate the issue on my bike. It looks like all the parts are still intact on your bike. I will look into this tomorrow and let you know.
Can I change the motor in my kugo Kirin b2 ? When will the tyre changing video come out?
Hub motor is very difficult to change and can cost you a lot. I am not sure yet when I will have the tire video out, I have so many videos to make and not enough time 😆
@@ShivaSapkota how would you upgrade the hub motor if money no object?
Thank you
How do you tighten up the folding quick release, mine is very loose and I can’t figure how to tighten it so it snaps into place and keeps my bars from not folding. Would love a response!
Hi Diego, give this a try. Let me know if it works for you. th-cam.com/video/1mW-1WisqA8/w-d-xo.html
@@ShivaSapkota you sir have saved Costco a return, and earned yourself a sub🤣
@@flufnug Awesome! Thanks for the support and I am happy to help.
Hello I have a question. The lock that folds the bike doesn't lock anymore, it is loose. I have to use the lock clip so that the handlebars stay straight. How can I tighten them again? Thanks.
Hi Abdiel, let me see if I can post a quick video soon on that. I have been getting that question a lot and I will try to figure it out. Thanks.
@@ShivaSapkota thanks so much, I appreciate it.
I actually did the slime thing. It worked for about 3 days, then it went flat again. I weigh about 245. I think I might be too heavy for this. I know the specs say 260 but I don’t know how that’s possible. And it’s the back tire that went both times. It’s sad because I really like this bike.
Hi Jay, sorry to hear that you are having flat tire issues. Perhaps replace the tube? I have seen some 14" tubes in Amazon. Thanks for watching my videos.
Yeah bro u just gotta replace the inner tube! I’m 6’6” and 235lbs and I ride the one without pedals…. The same thing happened to me but I replaced it with a stronger inner tube from Amazon and applied the slime and I haven’t gotten a flat since.
@@ChrisMenendez609 Thanks Christian. I appreciate the input. Do you have a link of the tube you bought from amazon?
@@ShivaSapkota I do but I have the regular red and black jetson bolt so the tube for the regular one is smaller than the jetson bolt pro with pedals. So I don’t think it would help you or his situation. But I can still place it down here if you’d like :)
@@ShivaSapkota also the insert were you put air is curved in the jetson bolt regular as opposed to the pro where the air insert is straight
This is 2 years ago but I’m figuring out how to use my Jetson and how to fix the tire. When I used the slime and spinned it. I pumped air and still had a flat. I can’t hear, see or feel anything. Any tips? Also this is my first time owning a bike 😂
Hey man! I was wondering if you'll do a video on installing a new speed controller anytime soon? I love my jetson but I'd like a bit more speed out of it to keep me safe at night! Anything helps man :)
Hello, I will have that video out this weekend. I am able to do about 3 more mph on my new controller using the stock battery. So, it won't boost a lot but that might be enough. I think if I get a 48V battery, it might do more.
@@ShivaSapkota thank you for the quick reply! I look forward to the new video! My friend and I love your content :)
@@ryzingsun Awesome, thanks for the support. I should have that video out by Sunday morning, potentially Saturday. Cheers!
I think you need a longer handlebar for more comfort riding
I agree, I wish the handlebar was a bit taller. Thanks for watching my video.
Another great vid, Sheva. Do you feel the Slime will cause any balance issues, or is it negligible in such a small time? I’ve used Slime for car tires just to get me to a tire shop (Costco), and it definitely had a balance issue. Thanks.
Thanks Craig. I took it for a quick ride and didn't have any balace issues. I will let you know as I test it more:)
Great video only if it was done two days earlier just spend $35 on a flat tire lol ...
Frank, I am sorry to hear that my friend. Well, now you know for next time:)
I was not able to remove inner part from the back tire using the cap . Is the cap( inner part remover) of Slime defective?
This is just what I need. I tried a tube patch and it doesn't work. I'll order slime and try that. I miss riding my Jetson.
what air tube do i buy for my jetson bolt pro
Hello, Jetson has a product listed on their site for this ebike. You can also get a standard 14" air tube. Thank you.
What kind of pump is that
Does it work for the back tire too? Bc I got a hole from a nail in my inner and outer tire. Can slime still fix this?
Hello, yes this will work on the back tire. You can also replace the inner tube using my video on tire/tube replacement. Thanks.
Do you have a link for replacement tubes on the Bolt Pro?
Hi Kayla, you can use any 14x2.125 tubes. Here is one that is heavy duty: amzn.to/3yFQS9a
Thank you so much!!
I think the valve is torn from the inner tube - of my back tire - but I haven't taken it off - I don't see any puncture marks of nails. will the slime do anything.
Slime may not help very much if the valve is busted. You might need a need tube. I have a video on how to replace it. Thanks.
@@ShivaSapkota going to try slime and ordered a new tube. It was a slow leak today.
A small staple impaled one tire will it still work after I do this?
Yes, it will do the job. They guarantee this will work on treaded area, I don't think this will work on the side walls. Is yours on the treaded area?
Yes indeed
The black piece to the slime is broken what do I do now?
I need help my brakes broke on my Jetson on the front don't know where to find them at
Please contact Jetson for repair parts. You can also check in Amazon. This bike uses same brakes as the DYU D3 ebike.
Will fix a flat also work ?
Great!
Did u wear out the stock tires
Not yet, but probably getting close. Thanks for watching my my video.
@@ShivaSapkota how much do you ride it
@@nolacross704 Last Fall I rode a lot but then it is still snowing out here, so didn't get to ride too much in the Winter. I haven't been keeping track but my brake pads needed replacement. The tire tread is looking a little low on my bike. The one from the video today is my wife's.
Does the slime cause any balance issues?
It didn't cause any balancing issues for me. I have heard some folks saying it caused balace issues for them but they don't have a Jetson bike. Thanks for watching my video.
Yes it will affect wheel balance. Since these bikes come with no wheel balancing at all, the Slime will actually automatically balance the wheel as you ride. I use AirSoft BB's to balance car tires and Slime will do the same by distributing itself around the inside of the tire and balance the wheel. Motorcyclists and off-road truckers use balancing beads to balance their wheels. There may not be enough Slime injected into the Jetson tires to perfectly balance the wheel, but it will improve the balance, not make it worse.
Help! I have a flat on my rear tire. How do you get it off to replace the tube????
Hi Allen, how big is the flat? Do you think Slime would help? If not, you can just remove the outer nuts, brake assembly and the wheel should come off. The motor is an embedded hub motor so it comes off with the wheel. You can watch my brake pad replacement video on how to remove the brake assembly. Hope this helps.
@@ShivaSapkota Air gushes out the base of the valve, quickly loses any air pumped in. Slime or bike fix-a-flat would seem futile to even try... I called Jetson, they are sending me a new inner tube under warranty. The lady was very helpful, sent a video link showing some of the process, at least on their version of this ebike without a pedal. Got some useful info too from a bike shop for how the chain gear is loosened.... I think now I understand how to get it done. Thanks for your reply, you are always so helpful!
@@TxAllen972 I am glad Jetson is being helpful. The new innertube should be a good fix. Hope everything works out for you. Thanks for watching my videos and please reach out at anytime.
@@ShivaSapkota FYI... in the end I felt satisfied I knew how to remove the rear wheel to changed the inner tube, but when I went to do it, I got stuck removing the brakes after I inadvertantly stripped the screws on it. So I took it to a bike shop, and they did the job (replacing the inner tube, and the screws too) for $20. Can't beat that!
@@TxAllen972 Thanks for the update. I am glad everything worked out in the end. Thanks.
xe nầy bán 1 chiếc gia bao nhiêu ?
What is the PSI for the Jetson Bolt Pro
Look on the side of the tire
Anyone know I can get some disc brake?
Hello, do you mean the full disc brake assembly or just the pads. This video I did might help: th-cam.com/video/_a7Hmp9cybM/w-d-xo.html.
@@ShivaSapkota just the disk. My back disk got bented and kept me from having a smooth roll. It's having friction and getting caught up with the pad due to it's uneven disc.
@@smlbcity23 What if you contact Jetson? They might send you the exact part. I forgot the measurement but something like this should work: amzn.to/2TK7a15
I assume this works on scooters?
Hi Jay, yes it works on scooters and even cars. Thank you!
So I do not have to remove the nail before adding the slime ? Just leave it
Hello, you have to remove the nail. It cannot seal while the nail is there. Thanks for watching my video.
@@ShivaSapkota Remove nail. Add Slime. Electronic pump.
@@mavrolus Yup, exactly!
@@mavrolus Yes, it is the same process. Just push the tool in a little bit and turn towards the left. Sometime it requires some force while turning. Even though the back valve is bent, the inner part does come out like the front. Hope this helps.
Hello there, got a question for you. I seen the Jetson Bolt Pro advertised on Outdoor Tech. It had one of your videos attached to the advertisement. They have refurbished bikes. Do you endorse Outdoor Tech?
Thanks, Rick
Hi Rick, I didn't even know about it until now. Thanks for letting me know. I allow embedding of my videos, so I guess it is okay they are using my video but they never asked me or anything. I have never purchased anything from Outdoor Tech so, no, I do not endorse them or really know about their products and services. Thank you again for telling me about it, much appreciated.
@@ShivaSapkota You are most welcome. Thanks for responding ☺️
Dammit now I have to get a ebike haha
Haha you should, they are super fun!
Doesn’t this throw your tires out of balance?
Hi James, it hasn't really caused any balancing issues but I have heard in bigger bikes it causes some off balance. Thanks for watching my video.
to avoid that you want to go for a ride or keep spinning the wheel right after you put it in so it doesn't all settle at the bottom and dry in a big chunk.
Voids Mercedes tire warranty if used. I'm certain it voids other manufacturers warranties too. Want to ruin your Tire pressure warning sensors/system? Put that in your tire or your neighbors tires if you dislike them.
Seems like that would gum up the air valve.
He pulled out the valve stem before adding the slime
Also, keep bottle safe from kids playing with it, could be toxic if swallowed.
Where the video how to remove or replace tire
Anyone experiencing a rougher bumpy ride after using the slime?
It didn't work for me
This company is s#$#$##$_ they don't ship to some states