I have two xbee S2C. While one of them is working, my computer doesn't see the other one, so I gues there's no problem with my computer. Why could it be and how do I solve? is there any suggestion?
1. Connect the Old XBee 2. Click on the "Modem Configuration" tab. Click the "Read" button to read the configuration from the old XBee module. This will retrieve all the settings from the old XBee. 3. After reading the configuration, click on the "Save" button to save the configuration to a file on your computer. This file will contain all the settings of the old XBee module. 4. Now connect the New XBee and again Click on the "Modem Configuration" tab. 5. Click the "Load" button and select the configuration file you saved in step 3. 6. Click the "Write" button to write the configuration to the new XBee module. 7. After writing the configuration, you can click the "Read" button again to verify that the configuration has been successfully transferred to the new XBee module. Remember that the XBee modules should be of the same type to ensure compatibility.
@@SMEDehradun sir first it shows action required warning and zero device found.it is not pan I'd problem.sir can I contact you personally so that I will explain my problem clearly
Unfortunately there are no instructions anywhere on how to communicate with Zigbee on esp32 c6 on arduino ide.The c6 and h2 are the only ones that have built-in Zigbee.
It’s not so easy but you can take the help form data-sheet of the XCTU. Below link may help you www.digi.com/resources/documentation/digidocs/PDFs/90001458-13.pdf
I'm looking for the video where you used the xbee with TI and Arduino
🤔 we will try, when every we got time for this.
Great 👍
Thank you sir
Sir please tell me to configure Xbee s6b module.
I don’t have this board to test the configuration.
I have two xbee S2C. While one of them is working, my computer doesn't see the other one, so I gues there's no problem with my computer. Why could it be and how do I solve? is there any suggestion?
You need to use to different USB TTL converter so that you can see both of the XBee at a time.
@@SMEDehradun Actually, I wasn't trying to get information from two xbee. There's one xbee connect to the my pc.
If it is not showing in your PC then there is issue with XBee.
hi can you help how to copy existing configuration of an old to Xbee to new xbee
1. Connect the Old XBee
2. Click on the "Modem Configuration" tab. Click the "Read" button to read the configuration from the old XBee module. This will retrieve all the settings from the old XBee.
3. After reading the configuration, click on the "Save" button to save the configuration to a file on your computer. This file will contain all the settings of the old XBee module.
4. Now connect the New XBee and again Click on the "Modem Configuration" tab.
5. Click the "Load" button and select the configuration file you saved in step 3.
6. Click the "Write" button to write the configuration to the new XBee module.
7. After writing the configuration, you can click the "Read" button again to verify that the configuration has been successfully transferred to the new XBee module.
Remember that the XBee modules should be of the same type to ensure compatibility.
If you dont have time to make the video interfacing with a microcontroller could you point to some good rescources on how to do that in the meantime?
I will try for it once get the free time.
I would also appreciate it when you get the time :D@@SMEDehradun
Is there a cheaper alternative to the Xbee S1 and what is it?
You can go for LoRa LPWAN
Where to buy only tiny U.FL antenna? Can you give a link to buy only antenna?
Plz google for this.
can you calculate the exact delay and if possible nrf24 module pairing
I will try to make video for nrf.
@@SMEDehradun Thanks, it's like pairing between nrf, similar to what you did with xbee channel: "c & 1020" if possible.
hii sir,i connect xbee s2c and s2 also but it shows device not found.please tell me any solution for this problem
The board only search only having same PAN ID. So configure it in similar PAN ID.
@@SMEDehradun sir first it shows action required warning and zero device found.it is not pan I'd problem.sir can I contact you personally so that I will explain my problem clearly
@jamanaharibabu3646 I have shown all the information in the video.
If you want to contact us, mail us at schematicslab@gmail.com
@@SMEDehradunsir I send please check once
I have done as you said but data is not receiving on the other terminal
There can be lots of reason of this.
Try to reconfigure it again and select the proper baud rate ask well.
for both the modules set Destination Low Address to FFFF instead of 1 and it should start working
👍
Change both Destination address Low to FFFF it working
It may be. I am not sure. You need to test it in real time
with the esp32 c6 that has integrated zigbee in a similar way?
Yes you can.
While connecting the esp32c6 to the XCTU it does not recognize it as an RF device while it finds it on com6. Do you know exactly how to do it?
You need to configure it through Arduino ide
Unfortunately there are no instructions anywhere on how to communicate with Zigbee on esp32 c6 on arduino ide.The c6 and h2 are the only ones that have built-in Zigbee.
Sir I want to interface xbee with nodemcu
Is this possible?
Yes. It is.
@@SMEDehradun but how sir I'm using this in my major project
Configure it as shown it in the video and then send data serially from NodeMCU to XBee. Similarly do it in both nodes and it will
Work.
sir how to digital input /output 8 or 15 channel configuration help me or share contact details
It’s not so easy but you can take the help form data-sheet of the XCTU.
Below link may help you
www.digi.com/resources/documentation/digidocs/PDFs/90001458-13.pdf