You got lucky, ideally have two fences, an electric outer fence, and a mesh inner fence where they have to constantly come into contact with the electric wires for long enough to get through the inner wires.
My electric fence has every other strand ground, 6" apart. A full 10,000 colts to the unlucky trespasser. I don't depend on ground conductivity. (Dennis)
there should be a channel or live stream of bears getting into bee hives out in the open for the bears. also have a camera inside so when the bear opens it up, first thing you see is a bear nose with a bee on it. I could watch the bears get into bee hives for hours
Interesting video, Thanks for sharing. In some of the footage it looks like the ground is dry. This dry ground will have higher resistance and decrease the efficiency of your electric fence. I know of two ways to fix this. One, wet the ground around the fence. Two, add ground wire to your fence in-between your hot wires. I have had great success adding ground wire in dry conditions.
Thanks for replying. I have neutral wires spaced between the hot wires and when I test the fence using the soil near the fence as the ground I still got voltages in the range of 7500 to 8500. No, as I said in the video the problem was the wire was a little too lax and spacing a little too great. Because of recent wild fires, etc there was tremendous pressure on these guys to eat and prepare for winter. More wire courses under higher tension plus more food in the wild has solved the problem.
@@wildlifebybean But the bears are still starving. Your brilliant solution does not help the bears. Should it have? They were there before you were but they never bought the property.
@@WilliamMurphy-uv9pm And if he hadn't bought the property there would be no beehives there and the bears would still be in the same situation food-wise.
Tape and plain wire electric fences are NOTORIOUSLY USELESS on thick furry/wooly animals, not to mention chickens. Some might get a shock on their wet nose if/when sniffing the wire, but most just walk straight through them. The best improvements are to use closely spaced *barbed wire* (to penratrate the fur), AND to have a very high current with a short frequency sender with a very good (wet) earth stake. Add some vertical strakes to prevent push-through.
Where can I buy all the equipment in your video. I am a new beekeeper and want to protect them against bears. Does this equipment come in a set to buy. Thank you for the video.
Thanks for watching. Livestock/Agriculture supply places. Even a place like Home Depot may have stuff. If you need protection of same size area I used, you only need a 1 joule energizer (gives 8-9,000 volts at about 150 mA). You need at least 6500 volts for bears. 12-14 gauge fencing wire and solid wooden corner posts. Avoid solar powered, they are not as strong. If plugged directly to house current, the Energizer needs to be protected from the weather. You want good wire tension (I used turnbuckles) and seven wires to discourage small bears. Check how I used the insulators on the corners and how neutrals and positives are placed. Hive bodies should be at least three feet from fence.
When protecting bees or anything else from bears you need to use barb wire and the strongest electric fence charger you can find. Bears can slip through plain wire because their fur is so thick. Barb wire can be stretched much tighter making it harder for them to slip under or between the wires. The longer the barbs on the wire the better.
No. You should never use barbed wire on an electric fence. Yes, wire should be under sufficient tension to create enough pressure on the bears thick coat to deliver an adequate shock. This requires strong wooden corner posts. For the apiary in this video, a one joule energizer delivers 9500 volts which is more than sufficient once the wire tension was increased..
@@wildlifebybean You are underestimating the physical nature of bears. Once a bear learns how weak the fence is they will just ram their way through. At present your system just bluffs them. Having a solid fence system that cannot just be rammed through surrounded by the electric fence will make it much more difficult to penetrate for a bear. I assume your system runs direct to electricity without a battery backup.
@@Art-is-craft No, barbed wire should NEVER be used with an electric fence, rather it should be set up properly. No, I do not want to kill or even injure the bears. They were simply hungry and trying to prepare for winter. Yes, I use house current to the energizer to deliver 9500 volts DC at about 200 mA to the fence. The old fence was inadequate as described in another video. The new fence does the job. The bears now leave it alone.
@@wildlifebybean I am not suggesting a barbed wire electric fence. But a solid fence that cannot be run through will stop a bear. A bear that is aggressive enough can snap a simple electric line. A barbed wire fence with a solid profile with an electric line on the outside side will also work. None will kill a bear.
I had the same problem slipping between the wires, I solved it by attaching chicken fence to the wires, they cant push through cause no matter where they put their nose it gets bit!
i saw a video of black bear who dug a trench under the fence to get in and out, dude had tarpaulin on the ground around the fence but it didnt stop the bear
I feel so terrible for all of the wildlife that we have, slowly getting smaller by the numbers. There is no food for them, I understand that they get desperate and I understand you love your bees and you have them for a reason and I appreciate that too. I just wish that society would stop destroying lots and lots of forest and woods. We keep invading their space, and none of us want to learn to live with them, but they're expected to learn to live with us and by our rules. Every day they lose their homes, their food, there's just not enough food out there for these animals. I know you don't want to lose your bees, and your honey, and I'm grateful for what you do. I don't throw anything out, I throw it to the woods.😢❤❤❤
Very nice soothing voice, would love to hear him narrate an entire wild life show. Thank you so kindly sir 👂😌
You got lucky, ideally have two fences, an electric outer fence, and a mesh inner fence where they have to constantly come into contact with the electric wires for long enough to get through the inner wires.
Fence posts and wires need to be stronger and more powerful current.
My electric fence has every other strand ground, 6" apart. A full 10,000 colts to the unlucky trespasser. I don't depend on ground conductivity. (Dennis)
there should be a channel or live stream of bears getting into bee hives out in the open for the bears. also have a camera inside so when the bear opens it up, first thing you see is a bear nose with a bee on it.
I could watch the bears get into bee hives for hours
Interesting video, Thanks for sharing. In some of the footage it looks like the ground is dry. This dry ground will have higher resistance and decrease the efficiency of your electric fence. I know of two ways to fix this. One, wet the ground around the fence. Two, add ground wire to your fence in-between your hot wires. I have had great success adding ground wire in dry conditions.
Thanks for replying. I have neutral wires spaced between the hot wires and when I test the fence using the soil near the fence as the ground I still got voltages in the range of 7500 to 8500. No, as I said in the video the problem was the wire was a little too lax and spacing a little too great. Because of recent wild fires, etc there was tremendous pressure on these guys to eat and prepare for winter. More wire courses under higher tension plus more food in the wild has solved the problem.
@@wildlifebybean But the bears are still starving. Your brilliant solution does not help the bears. Should it have? They were there before you were but they never bought the property.
@@WilliamMurphy-uv9pm And if he hadn't bought the property there would be no beehives there and the bears would still be in the same situation food-wise.
Tape and plain wire electric fences are NOTORIOUSLY USELESS on thick furry/wooly animals, not to mention chickens. Some might get a shock on their wet nose if/when sniffing the wire, but most just walk straight through them.
The best improvements are to use closely spaced *barbed wire* (to penratrate the fur), AND to have a very high current with a short frequency sender with a very good (wet) earth stake. Add some vertical strakes to prevent push-through.
That first bear said "aint nothing getting in my way"😂❤
Where can I buy all the equipment in your video. I am a new beekeeper and want to protect them against bears. Does this equipment come in a set to buy. Thank you for the video.
Thanks for watching.
Livestock/Agriculture supply places. Even a place like Home Depot may have stuff. If you need protection of same size area I used, you only need a 1 joule energizer (gives 8-9,000 volts at about 150 mA). You need at least 6500 volts for bears. 12-14 gauge fencing wire and solid wooden corner posts. Avoid solar powered, they are not as strong. If plugged directly to house current, the Energizer needs to be protected from the weather. You want good wire tension (I used turnbuckles) and seven wires to discourage small bears. Check how I used the insulators on the corners and how neutrals and positives are placed. Hive bodies should be at least three feet from fence.
@@wildlifebybean thanks for info
When protecting bees or anything else from bears you need to use barb wire and the strongest electric fence charger you can find. Bears can slip through plain wire because their fur is so thick. Barb wire can be stretched much tighter making it harder for them to slip under or between the wires. The longer the barbs on the wire the better.
No. You should never use barbed wire on an electric fence. Yes, wire should be under sufficient tension to create enough pressure on the bears thick coat to deliver an adequate shock. This requires strong wooden corner posts. For the apiary in this video, a one joule energizer delivers 9500 volts which is more than sufficient once the wire tension was increased..
@@wildlifebybean
You are underestimating the physical nature of bears. Once a bear learns how weak the fence is they will just ram their way through. At present your system just bluffs them.
Having a solid fence system that cannot just be rammed through surrounded by the electric fence will make it much more difficult to penetrate for a bear. I assume your system runs direct to electricity without a battery backup.
@Art-is-craft is your honey so valuable that you would rather have a dead bear?
@@Art-is-craft No, barbed wire should NEVER be used with an electric fence, rather it should be set up properly. No, I do not want to kill or even injure the bears. They were simply hungry and trying to prepare for winter.
Yes, I use house current to the energizer to deliver 9500 volts DC at about 200 mA to the fence. The old fence was inadequate as described in another video. The new fence does the job. The bears now leave it alone.
@@wildlifebybean
I am not suggesting a barbed wire electric fence. But a solid fence that cannot be run through will stop a bear. A bear that is aggressive enough can snap a simple electric line. A barbed wire fence with a solid profile with an electric line on the outside side will also work. None will kill a bear.
I had the same problem slipping between the wires, I solved it by attaching chicken fence to the wires, they cant push through cause no matter where they put their nose it gets bit!
Good Morning 🐻 🥰🥰🥰🥰
Back at you.
@@wildlifebybean You ' re welcome 🥰🥰🥰🥰
i saw a video of black bear who dug a trench under the fence to get in and out, dude had tarpaulin on the ground around the fence but it didnt stop the bear
A couple of spikes below the fence can make it more difficult. Foxes will do the same with fences to get at chickens.
Plywood with nails in it around perimeter would definitely help your set-up
I feel so terrible for all of the wildlife that we have, slowly getting smaller by the numbers. There is no food for them, I understand that they get desperate and I understand you love your bees and you have them for a reason and I appreciate that too. I just wish that society would stop destroying lots and lots of forest and woods. We keep invading their space, and none of us want to learn to live with them, but they're expected to learn to live with us and by our rules. Every day they lose their homes, their food, there's just not enough food out there for these animals. I know you don't want to lose your bees, and your honey, and I'm grateful for what you do. I don't throw anything out, I throw it to the woods.😢❤❤❤
US and Canada has huge areas for bears to roam but they by nature always push boundaries.
wont hurt them but it is "very educational" LOL
Arūnas Films respect
Saved the bears from the hives or honey from the bears. Another confusing title. The bears certainly were not saved from strong electrical shocks.
Bears do not die from such low level shocks. They will face far more dangerous situations in the wild to include other bears.
Your video was great but we gotta stop saying wildfires , it was arson and bad forest fire management.
Polly scared of trudeau locking him up for 'misinformation and disinformation '
Yes. The "wildfires"took a break during covid apparently.
But, they are wild in the sense that they are uncontrolled. Perhaps they should be called arson wildfires!
Mi guardi la Russia
barbed wire.
Barbed wire in between the electrical lines will help to stop push through.