To use the steering controls, there's a green wire with a male and 2 females, connect the male to the green wire from the new radio for the controls to go to it, connect it to the green wire from the radio to go to that instead.
Trong Nguyen the wire that was connected to the factory screen is being held by a plastic bolt All u have to do is turn that bolt and u can extend the wire
Trong Nguyen www.ebay.com/itm/For-08-13-Honda-Accord-10-1-Android-9-1-GPS-Navigation-Stereo-Radio-WiFi-2-32G/254407051788?pageci=0ca23459-7e28-434f-aa94-a4bf02e74b2c
I got the same unit and I can’t find where to put the plug ( the one that connects to the aux wires) in the car. I have a 2010 accord and I’m lost asf wirh my car rn. No audio bro 🤦🏽♂️
My car doesn’t have a connector that the aux harness plugs into wtf. Only wire that looks like it is the top wire which plugs into the top of the oem radio but it doesn’t fit my connector
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
I installed my unit. But now my my climate control lights and factory radio lights won't come on. But everything still work fine...jus the lights won't come on.
I bought one couple weeks and realized one of the AUX harness wasn't fit to connect to the OEM radio. Request for installation manual and replacement but did not hear back from him since then.
Did you figure it out? I got one of these and the aux harness didn't fit into the plug on mine neither. I figured I could use a 3.5 aux to left right and plug it into the aux in the center console but it didn't work.
@@defmud80 Don't waste your time to wait for the solution. Return it to the seller and get something like ATOTO Android radio. I bought an ATOTO 2DIN Android Car GPS RADIO from Ebay which is much better than this one. Hope this help
@@damont1769 I actually figured out how I could make the connection and it's all good. System is great and sounds good. If I had more issues though I was going to definitely return it.
@defmud80 just installed in my 2009 accord.... no sound. The harness it came with is 20 pin but the OEM radio plug is 12 pin (similar to the one that goes into the clock display).... How did you get it to work?
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
@@armandhammerbamboozled2993 the factory aux plugs have a grey clips. The aux harness that comes with the android unit plugs into those and had two wires sticking out. Those sticking out are red and black rca cables. Those r a csbles plug into the "AUX out" RCAs on the power harness.
@@jaimealvarez4722 Mine is a 2011 lx and no where on my factory radio does that aux piece that comes with the unit plug into, it’s the only thing stopping a/c , heat or sound come thru speakers
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
@Jaime Alvarez the thing is the harness that should go into the OEM with the male RCA connectors, dies not fit the OEM. the harness provided is 20 pin and the radio plug is 12 pin..... any ideas?
Use google traductor spanish to English, if someone have the solution or convination to working control wheel please tell us how is the wire combination. Tks
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
I hooked the red power cable to the brown "reverse" wire. The display goes to receiver when i put it in reverse but no display. Yellow cam plug is in. ? For me atleast.
Saludos, tengo ese mismo radio, pero me sucede lo mismo sobre el steering control, esto no funciona porque el arnes que trae ese radio viene incompleto y tienes que añadir cables para que pueda funcionar el steering control, les envio una foto de donde deberian tener el cable extra para que piedan usar el control
To use the steering controls, there's a green wire with a male and 2 females, connect the male to the green wire from the new radio for the controls to go to it, connect it to the green wire from the radio to go to that instead.
Y’all funny asf 😂😂😂but hella helpful goodlookin gang
This man never made another video….
Thank you so much for this video!
Thank you so much
Trong Nguyen your welcome bro
Your video is great!! But how can you connect the factory screen??
Trong Nguyen the wire that was connected to the factory screen is being held by a plastic bolt
All u have to do is turn that bolt and u can extend the wire
Go at 7:45 and me and my cousin explains what I just told u
Trong Nguyen www.ebay.com/itm/For-08-13-Honda-Accord-10-1-Android-9-1-GPS-Navigation-Stereo-Radio-WiFi-2-32G/254407051788?pageci=0ca23459-7e28-434f-aa94-a4bf02e74b2c
yall are funny as hell XD
Man gotta take the protective tape off the plexiglass they sent you
I got the same unit and I can’t find where to put the plug ( the one that connects to the aux wires) in the car. I have a 2010 accord and I’m lost asf wirh my car rn. No audio bro 🤦🏽♂️
Me too
Same
My car doesn’t have a connector that the aux harness plugs into wtf. Only wire that looks like it is the top wire which plugs into the top of the oem radio but it doesn’t fit my connector
did you figure it out?
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
I installed my unit. But now my my climate control lights and factory radio lights won't come on. But everything still work fine...jus the lights won't come on.
Did you get this figured out. I have same issues now
I can’t find the harness on my factory radio that plugs into the aux power harness
Same
I bought one couple weeks and realized one of the AUX harness wasn't fit to connect to the OEM radio. Request for installation manual and replacement but did not hear back from him since then.
Did you figure it out? I got one of these and the aux harness didn't fit into the plug on mine neither. I figured I could use a 3.5 aux to left right and plug it into the aux in the center console but it didn't work.
@@defmud80 Don't waste your time to wait for the solution. Return it to the seller and get something like ATOTO Android radio. I bought an ATOTO 2DIN Android Car GPS RADIO from Ebay which is much better than this one. Hope this help
@@damont1769 I actually figured out how I could make the connection and it's all good. System is great and sounds good. If I had more issues though I was going to definitely return it.
@defmud80 What model Accord do you have?? How did you get it to work?
@defmud80 just installed in my 2009 accord.... no sound. The harness it came with is 20 pin but the OEM radio plug is 12 pin (similar to the one that goes into the clock display)....
How did you get it to work?
Hey bro I need help with installing this radio.. I got the same exact setup but I'm unable to get any sound from my radio
What's this code are you talkin about
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
@@jaimealvarez4722 where is the factory aux plug, also now my a/c and heat don’t work
@@armandhammerbamboozled2993 the factory aux plugs have a grey clips. The aux harness that comes with the android unit plugs into those and had two wires sticking out. Those sticking out are red and black rca cables. Those r a csbles plug into the "AUX out" RCAs on the power harness.
@@jaimealvarez4722 Mine is a 2011 lx and no where on my factory radio does that aux piece that comes with the unit plug into, it’s the only thing stopping a/c , heat or sound come thru speakers
I got one yesterday and I don't have any sound how did you get the sound of everything was plug and play
Hey man I just got done installing mine and the damn sound and radio don't work for some reason. Any tips or ideas on what's going on with it?
same here
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
Same issue
Same issue here, the radio and steering controls don't work and when I start the engine sometimes the unit reboots.
@Jaime Alvarez the thing is the harness that should go into the OEM with the male RCA connectors, dies not fit the OEM. the harness provided is 20 pin and the radio plug is 12 pin..... any ideas?
Does it come with back up camera
Use google traductor spanish to English, if someone have the solution or convination to working control wheel please tell us how is the wire combination. Tks
Enviame lo al instagram por favor 🙏 @JRiCkyReys
Where can you get the harness to extend the cord to the screen moved to the bottom?
Were you able to resolve the steering control issue? Thank you.
same question here !
I put 1 in my 09 honda accord it keeps popping out of the,dash
Soo I have so many questions I can’t get the sound to work and I need to help !!
Did u fix it?
Charlie C. Nahhh still tryna figure it out
Me neither, any tips??!
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
My audio doesn’t work . I have the same kind . Everything turns on , just no sound .
Did u fix it?
fixed?
Check out 6:00. They plug the red/black plugs from the AUX harness (coming from the factory aux) into the aux out R/L from the power harness. So the output of the Android unit goes to the factory aux sound.
@@jaimealvarez4722 So one goes on AUX in and one goes in AUX out or both in AUX in???
which harness is the speaker
Link to seller u bought from I bought this and the back up camera doesn’t work either
I hooked the red power cable to the brown "reverse" wire. The display goes to receiver when i put it in reverse but no display. Yellow cam plug is in. ? For me atleast.
Having issues with audio
Fixed my issue my unit didn't come with the red white aux cable that also has headphone jack.. purchased that and it works
Hello I was wondering is there a way I can contact you to help me do the install because your video has missing prts
Parts
Saludos, tengo ese mismo radio, pero me sucede lo mismo sobre el steering control, esto no funciona porque el arnes que trae ese radio viene incompleto y tienes que añadir cables para que pueda funcionar el steering control, les envio una foto de donde deberian tener el cable extra para que piedan usar el control
Dale porfa este es mi instagram @JRiCkyReys
How do you find out your radio passcode
It’s in the glovebox with the car manual and stuff
Look in your glove box it should have the codes in there
where can i get those wire harness
why u yelling at ur friend
Portrait? Really? In 2020?