good move kyosho. i love my mini z. how does kyosho see the mr-03 evo compared to the other 1/28 chassis on the marked? considering the materials and pricing? is there any plans for a carbon chassis by kyosho?
I got the futaba 4 pk. And the mini z mr03 (not evo) Badest thing about mini z is te variation of transmitters. The newer ones are better but a new futbaba transmitter kost more than 600 dollar.
billy kelly they will be plug in. But the bigger question is will they make one for ALL Futaba Radios? For instance I own a Futaba 4PV, the receivers for the Futaba looks like only for the 7PX radios Only. I don’t want to spend 600 dollars for another radio right now!
MARKLINMAN1 thanks. Another also informed me that they will be plug in. Unfortunately it looks like only the Futaba 7 controller has be chosen. I’ve got the same problem. I’ll most likely be using one of my simple controllers, the KT-531p. I’m used to it.
I will be buying this if its faster then the MA-020. @Kyosho I'm trying to install a brushless motor in my Monster Tracker do you guys have a install kit with a ESC mount or anything?
Atomic bz is faster than ma-020. Carbon fiber belt drive. They sell with good hobbywing esc for $20 more and there are other good options too. Separate electronics. The atomic sz is Atomic's latest car, but not as nimble as the bz. I got it anyway because sealed shaft drive is more reliable when playing outdoors. Gl racing has one too, but imo doesn't corner as good.
@@mattypuddingfingers6562 if that's the case go with lc racing cars. Comes ready to run, durable good quality, and very good price. It was reviewed by rcdriver. In the states you can buy it from Warren rc. Rcmart might have them for less, but their website isn't secure anymore so buy from them through eBay if you decide to get it. Team associated tried to copy them, but their stuff isn't as durable. Way more fun because lc racing is small yet can go off-road on grass or anywhere. Ramping them is the fun part.
I bought one from a uk dealer it doesn't work properly and I don't think I'm going to gat a refund , I thought your Rc were good , to expensive , I bet you don't want to know either because you got your money !
good move kyosho. i love my mini z.
how does kyosho see the mr-03 evo compared to the other 1/28 chassis on the marked? considering the materials and pricing? is there any plans for a carbon chassis by kyosho?
Bout time. Should have always had the option to use your radio of choice. Been saying this since the 1st Mini z.
レシーバーが選べる、はいいけどそれよりも
各地で次々とミニッツコースの閉鎖が相次いでいる状況を京商はもっと深刻に受け止めるべきだと思う。
今のミニッツじゃ6畳間丸々のスペースあっても気持ちよく全開、とはいかない。
シャーシも材質変更で壊れやすくなったし（MA-020以降）
ユーザー離れを食い止める努力をもっと真剣に考えるべき。
KATO HIROYASU ミニッツ離れも11.2倍www
Incredible presentation awesome packaging very impressive!!!!
Thanks 🙏
Awesome. Can we have a re release Mk 1 Ultima now please Kyosho.
This video is over a year old now - are the Sanwa receiver units still planned? Any idea when a release date might be?
I got the futaba 4 pk.
And the mini z mr03 (not evo)
Badest thing about mini z is te variation of transmitters.
The newer ones are better but a new futbaba transmitter kost more than 600 dollar.
Will you be making a receiver for the Futaba 4PV radio? Or is it JUST for the 7PX series radios only ? Thank you.
SAXMANIVAN only for the 7 series.
Is the 20th anniversary still available in US?
What type of body will fit the mr03 evo?
Just need an frsky RX so I can bind it to my hours x10s 😉
why no support for cheaper stick radio's or a module for frsky?
1/10RCは大きすぎるからミニッツ欲しいな〜と思ったけど、この速度を楽しむには家じゃ狭いかも。近くにコースがある模型屋も無いからな⤵︎
Kyosho! please re release the old supergt autoscales!! 2005
Are these receiver boards plug in or solder in?
billy kelly they will be plug in. But the bigger question is will they make one for ALL Futaba Radios? For instance I own a Futaba 4PV, the receivers for the Futaba looks like only for the 7PX radios Only. I don’t want to spend 600 dollars for another radio right now!
MARKLINMAN1 thanks. Another also informed me that they will be plug in.
Unfortunately it looks like only the Futaba 7 controller has be chosen. I’ve got the same problem. I’ll most likely be using one of my simple controllers, the KT-531p. I’m used to it.
Are they still coming out with the sanwa receivers?
Crickets sounds 🦗
One can only hope. Seem unlikely at this point 😞
@@samuelbreton9061 it's okay I had to invest into a FlySky Noble. It's a really nice radio I highly recommended!
@@maxthunder2 I'll likely do the same. I really liked my Sanwa, but it might be time for me to move on 😅
I will be buying this if its faster then the MA-020. @Kyosho I'm trying to install a brushless motor in my Monster Tracker do you guys have a install kit with a ESC mount or anything?
Atomic bz is faster than ma-020. Carbon fiber belt drive. They sell with good hobbywing esc for $20 more and there are other good options too. Separate electronics.
The atomic sz is Atomic's latest car, but not as nimble as the bz. I got it anyway because sealed shaft drive is more reliable when playing outdoors.
Gl racing has one too, but imo doesn't corner as good.
@@one4all989 just getting into RC so I've never heard of em but just checked em out and they're badass for less $$$. Thanks mate.
@@mattypuddingfingers6562 if that's the case go with lc racing cars. Comes ready to run, durable good quality, and very good price. It was reviewed by rcdriver. In the states you can buy it from Warren rc. Rcmart might have them for less, but their website isn't secure anymore so buy from them through eBay if you decide to get it.
Team associated tried to copy them, but their stuff isn't as durable.
Way more fun because lc racing is small yet can go off-road on grass or anywhere. Ramping them is the fun part.
th-cam.com/video/f5cd1Kz-pL8/w-d-xo.html
th-cam.com/video/K7DYMm2CVm0/w-d-xo.html
Some videos
Good job Kyosho ;)
GTR R34 Black and WRX STI 2008 Black pls???
Awesome Channel
New Friend here with Bell
👍👊🤙✈️✈️
Same!
When can I get the McLaren P1 Autoscales?
Release date is expected this month
Can I use my EX1 ASF Radio?
Marc Wilkinson from looking on their site it looks like a NO, it only states EX-2 and EX-RR for now, who knows perhaps down the line they may.
MT-S使えんのか？
マッピーは今どうしてますかー(^_^;)
いつ見ても大きさに比べれば高すぎるラジコン
かけ
I bought one from a uk dealer it doesn't work properly and I don't think I'm going to gat a refund , I thought your Rc were good , to expensive , I bet you don't want to know either because you got your money !
What doesn't work?