Engine refuse to come apart! 1939 Chevrolet.

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 283

  • @rustybum2
    @rustybum2 16 วันที่ผ่านมา +2

    Hi Richard, I found your video very refreshing. No fancy tools, no huge workshop, just common sense, hard work and a bit of good luck. Well done and best regards from Ireland.

    • @YesterdaysMachinery
      @YesterdaysMachinery  11 วันที่ผ่านมา

      Thank you. Yes it takes time to afford all fancy tools and stuff. I like to work with what i have. I also like to watch videos with the same content. Not to much music and not to fancy but a good desent end result. Take care mate. /Richard

  • @SharkoonBln
    @SharkoonBln หลายเดือนก่อน +19

    No silly music. Just the right amount of narration, no constant "...next I will unscrew this bolt...". This is fun to watch.

    • @gerardwood4059
      @gerardwood4059 21 วันที่ผ่านมา +1

      Watch his older videos, the old victorian engines he gets running are fascinating to watch. The very beginning of diesel engine technology.

  • @Richard-t2b
    @Richard-t2b 25 วันที่ผ่านมา +2

    What a pleasure to watch. No BS, no idle chatter, just careful mechanical knowledge. Thanks. 😊

  • @richwhitaker1506
    @richwhitaker1506 หลายเดือนก่อน +42

    That engine was certainly very dirty,showing its age. Your careful disassembly and cleaning was outstanding. You'll have it running like a top in no time.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +15

      Fingers crossed! Hehe. I am very confident that it will make thousands more fun miles in the truck! /Richard

  • @edbelledin9600
    @edbelledin9600 หลายเดือนก่อน +14

    Sir, it is a pleasure to watch a true mechanic / craftsman at work. Your precise explanation of what you find and your gentle persuasion as you dismantled the engine was greatly appreciated.
    I love the old machines and appreciate your effort to restore them. I’m old now and can’t do it any more, so I happily smile watching you do it for me.
    I’ve watched all of your videos, and am looking forward to
    Many more..
    Thank you for documenting your efforts in restoring these old machines.
    Sincerely,
    Edward Belledin

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน

      Hello, and thank you for those kind words. Yes i am working now on the reassembly and now it is time to mesure ring gap and then fit the pistons.
      I wish you the best. Take care! /Richard

  • @starcarrier1874
    @starcarrier1874 หลายเดือนก่อน +37

    Opening up the valve cover…Ohhhhh! That was hilarious. I’ve been there brother. This is fun stuff Richard. Keep going.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +9

      Yes a bit worse than i hoped but we will sort it out! A fun challenge! Take care! /Richard

    • @atvheads
      @atvheads หลายเดือนก่อน +4

      @@YesterdaysMachinery Some mouse habitat!

    • @ppd3bw
      @ppd3bw หลายเดือนก่อน +7

      Ohhhh was very kind wording in this situation 😇

    • @urbankotto9685
      @urbankotto9685 หลายเดือนก่อน +3

      I made the exact same sound when the cover came of.Maby it`s beacuse we are Swedish?.

    • @starcarrier1874
      @starcarrier1874 หลายเดือนก่อน

      @@urbankotto9685 There are many Swedes and Norwegians who settled in Wisconsin long before my relatives did. I learned a lot from those guys growing up around the machine and repair shops as a youngster.

  • @wlrIII
    @wlrIII หลายเดือนก่อน +20

    It's great to see you back, Richard. You were missed!

    • @HAL9000-su1mz
      @HAL9000-su1mz หลายเดือนก่อน +2

      He must be busy living life!

  • @kingearl2596
    @kingearl2596 29 วันที่ผ่านมา +3

    You do your work like I do, step by step. No music, no vanity, just good ol' work. Btw.: These Chevvy sixbangers are VERY reliable, I like them.

  • @1955snipes
    @1955snipes หลายเดือนก่อน +5

    I am new to this chanel and I find it interesting. Dealing with old engines is what I like most about this channel. The engines belt during the period that you are working on was all case iron and very heavy. I imagen that the crank shaft weighted a lot after you pulled it out. That is how they had to build the engines back in those days. There were no aluminum heads at that time they were all cast iron and very heavy. Enjoy your show, and great to see someone restoring old cars and their engines.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +1

      Thank you! Yes everything is heavy but it also last very long and is often easier to repair than aluminium or plastic and computer boxes. /Richard

  • @MCW1955
    @MCW1955 หลายเดือนก่อน +2

    What a great channel to watch. Doing all this work while doing all the camera duties is not easy. Also, sneaking up on 100k !!

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน

      Much appreciated! Yes and the Subs and people watching makes it all possible to make! /Richard

  • @iamrichrocker
    @iamrichrocker หลายเดือนก่อน +10

    Richard..appreciate your calm and concise narration with no BS music or grandstanding,,your camera setup and editing makes the videos run smooth and understandable..one of my fav content providers whose passion shines through..ty

  • @donbennington677
    @donbennington677 หลายเดือนก่อน +9

    Crankshaft, bearings and pistons where a nice surprise after the grot you found on the way there.👍

    • @djdoo
      @djdoo หลายเดือนก่อน

      He is extremely lucky with those, also cylinder walls are great and it seems that the engine is low mileage but definitely water has rusted the upper parts.. I believe it will be a good engine after all the TLC it will receive

  • @bigmountain7561
    @bigmountain7561 หลายเดือนก่อน +9

    My Dad graduated high school in 1939 and joined the Navy. I will be 64 next week so I was the Oops or the baby of the family. Back then they made things to last if they were taken care of properly. Looks like you have a job coming up. Great Video Will Be Watching Thanks 🙏

  • @farmworkMi
    @farmworkMi หลายเดือนก่อน +3

    Just picked up a 235 and this helped me out a lot I learned tons thabks

  • @philiphartley8823
    @philiphartley8823 หลายเดือนก่อน +17

    Great old blowlamp. I think I still have one of those amongst my boxes of old toold from whern I started in engineering more than 60 years ago. Great video, I love the care you take this old engine apart with. Sign of a good craftsmsn.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +6

      Hi! Im in love with these old torches. Sivert petrol like this one is the most durable in my opinion. I use it at least every week. Runs for 1h on 1L petrol. /Richard

  • @lstone.09
    @lstone.09 หลายเดือนก่อน +10

    Your reaction on seeing the mess under the valve cover was priceless. Couldn't of said it better myself.
    Awesome video Sir. 👍👍👍

  • @atvheads
    @atvheads หลายเดือนก่อน +9

    I thought that the engine was a waste of time when i saw all the dirt inside the valve cover, but it seem to be in great mechanical order.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +9

      Yes my hopes got lower and lower. But when i saw the cylinders and bearings i was happy again! /Richard

  • @robwigglezz944
    @robwigglezz944 หลายเดือนก่อน +12

    Thanks for taking your time. A lot of these types of videos are just guys busting them loose and breaking everything in the process.

  • @andy_rb
    @andy_rb หลายเดือนก่อน +7

    The crank and big ends look great! I wasn't expecting them to be that good after your initial surprises. Looks like you've got a good engine there. Thanks for the videos, I'm really enjoying them!

  • @chrissmith7655
    @chrissmith7655 หลายเดือนก่อน +6

    Hi great to see you Richard. From Nr Liverpool UK.

  • @jjrosty9792
    @jjrosty9792 หลายเดือนก่อน +2

    I’m have a 1941 Chevy pickup. When we redid the brakes we used DOT5 brake fluid. All the steel & rubber lines were replaced. DOT5 is not hydroscopic, it will not draw water & rust every thing in a few years. It will also not remove paint like DOT3. BTW DOT3 & DOT5 DO NOT MIX ! If everything is new & clean you will not have any issues

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน

      Hi! Yes i will do the same thing here. I have to order brake hoses also. I have new copper lines. And everything else is new. /Richars

  • @binarydinosaurs
    @binarydinosaurs หลายเดือนก่อน +5

    Talk about a relaxing video to watch. It may not have been relaxing to actually DO, but watching it was excellent.

  • @timot7746
    @timot7746 หลายเดือนก่อน +5

    Many times an engine looking like that under the valve cover would be scrapped, but with a careful cleaning most of those parts will be usable again, a 6 story mouse house... looking forward of the next part, tack så mycket och lycka till!

  • @frankdeegan8974
    @frankdeegan8974 หลายเดือนก่อน +7

    We had a 47 chevy car with a 216 it never went over 45 mph till 1966 when we owned the car, the first month we owned it we drove 50 mph, evey month we uped the speed five mph till we reached 93 mph that is all the faster it would go. That engine is a good one.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +4

      I love stories like this. I think it is a very dependable engine. But people say that the rod bearings doesnt like high rpm. But i wont push it that hard anyway. /Richard

  • @zonie70
    @zonie70 หลายเดือนก่อน +11

    I am watching the video as we speak Richard. Thanks for taking the care you do to revive this old engine .

  • @JohnReed-c3s
    @JohnReed-c3s หลายเดือนก่อน +2

    Good video. I have a 216 Chevrolet, 1940 Master Deluxe 2 door sedan. I have owned this car since 1970, my high school transportation. I found that the original 216 has poured bearings instead of bearing inserts. Some rebuilders will regrind journals and install bearing inserts. Mine is original and still running with the "dipper" type splash oiling system. You have an interesting channel for this old mechanic.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +1

      Thanks mate! Nice! Yes i think i will be able to use the original bearings in this one. /Richard

  • @grevberg
    @grevberg หลายเดือนก่อน +3

    This is the first time I've seen anyone treat an old engine with the care it needs.
    Most people are happy to fire it regardless of the rust in the cylinders!

  • @georgejohnson1498
    @georgejohnson1498 หลายเดือนก่อน +7

    Loved every second of that. The last engine I watched being torn down to the the block was in 1978. I was a four cylinder Massey Ferguson 35 engine! Similarly huge pistons and block, though of course it was a diesel!
    Thank you. I really reckon that engine looks great and should run like a sewing machine when put it back together!
    Best wishes from George in UK.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +2

      Hi! Thanks mate. Those MF engines are real good. I have worked on many. But the diesel MF 35 should be just 3cyl?
      Take care! /Richard

    • @georgejohnson1498
      @georgejohnson1498 หลายเดือนก่อน +3

      @@YesterdaysMachinery
      Dear Richard,
      This was one of the first MF 35s [Coventry made in 1958] and was in effect a Golden Ferguson in MF red and grey paint. MF soon went to the three cylinder 152 cu diesel for the 35, which was a much rougher and noisier engine that could drive you mad with the lumpy sound. The old four cylinder was actually mistakable for a petrol on idle once warmed through, though under load it definitely a diesel - a refined one. The four cylinder variant were very hard starters in the cold. Anything of an actual frost let alone minus ten C. Minus twenty and you towed them till they went!
      Best wishes from George

  • @adrianrevill7686
    @adrianrevill7686 หลายเดือนก่อน +6

    What a lovely engine, it is in amazing condition it must have been well-maintained.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +6

      Yes i think so too. Well maintained ans care for untill they put it away. Probably has been standing outside for a while tho. /Richard

  • @jefflormans5441
    @jefflormans5441 หลายเดือนก่อน +2

    This brings back memories of tearing down my old EH Holden motor (Australian GM}. Love the old straight sixes.

    • @plainnpretty
      @plainnpretty หลายเดือนก่อน

      The straight 6 is a good design no matter what company made it

  • @johnleerichardson6220
    @johnleerichardson6220 หลายเดือนก่อน +7

    Always a joy to watch a craftsman at work take care

  • @1974UTuber
    @1974UTuber หลายเดือนก่อน +5

    I could have watched this rebuild right through to a running engine again. Should run very nicely by the time you're done.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +3

      Yes i like videos like this myself. This engine i think will be a good one. /Richard

  • @beakittelscherz5419
    @beakittelscherz5419 หลายเดือนก่อน +5

    I am amazed that an engine this rosted, and mouse-infested has such good looking cylinder walls! I was expecting the worst👀👀😎. You never know! What an awesome video. Lately I watched #Jennings motor channel, and I could not believe that you could get totally stuck motors running again... And restore Compression. Awesome! Thank you for showing & Greetings from Germany.

  • @ВладимирВасильевич-й1ш
    @ВладимирВасильевич-й1ш หลายเดือนก่อน +3

    Ричард, рад снова тебя увидеть в новом видео. Хорошо что снимаешь весь процесс. Особое уважение, что не используешь перчатки, потому что исторические механизмы должны почувствовать тепло рук механика чтобы снова ожить!

  • @Ioughtaknowbetter
    @Ioughtaknowbetter หลายเดือนก่อน +2

    Kudos to you for not being discouraged when you saw all the dirt and rust. It looks like it's going to be a great running engine!

  • @RUNE-66
    @RUNE-66 หลายเดือนก่อน +6

    Cool project, great video. Definitely see you in the next one. Cheers 🍻🥰👍

  • @andrewhall2554
    @andrewhall2554 หลายเดือนก่อน +1

    Great video! It brought back memories of rebuilding a similar engine from a 1950 Chevrolet pickup when I was a teenager over 50 years ago. Interestingly, that engine had similar bottom end bearings.

    • @devonbond3093
      @devonbond3093 หลายเดือนก่อน

      Chevrolet didn't use inserted main and rod bearings until 1954, I believe.

  • @jamesnewberry58
    @jamesnewberry58 หลายเดือนก่อน +2

    Helped my Father when He rebuilt his 39 engine in the fall of 1959.

  • @stevebloke5455
    @stevebloke5455 หลายเดือนก่อน +2

    Im not rely a car guy but this is great!! gotta love the old bangers back when things were made to be fixed not thrown away. Thanks for posting.

  • @mikerussell505
    @mikerussell505 หลายเดือนก่อน +1

    If the cylinder head is original, your engine is a 1940. A 1941 engine would use the small 10mm thread spark plugs. Also, the main bearings changed from '40 to '41. Looks like the bottom end is in good shape. Very lucky, as that is the expensive area when it come to refurbishing. I have a 1939 Chevy 1/2 ton. I hope I can get it back together , one of these days. New subscriber.

  • @tectalabyss
    @tectalabyss หลายเดือนก่อน +3

    Looks like you have found an engine that has been rebuilt,going by the tuneup parts,bearings,Etc. I remember has a little boy watching my Dad rebuild one of these for a friend. I am looking forward to more on this series. I liked and shared. All my very best.

  • @markmurphy2758
    @markmurphy2758 หลายเดือนก่อน +6

    Hi Richard, that engine is going to be a beauty. Cant wait to see the build up.

  • @robertheine9723
    @robertheine9723 หลายเดือนก่อน +2

    Thank you Richard for another great entertaining and educational video. I'm always amazed at your vast knowledge of machinery.

  • @donsundberg5730
    @donsundberg5730 หลายเดือนก่อน +2

    Looking forward the the rest of the videos. This should make a great series.

  • @krr711
    @krr711 หลายเดือนก่อน +3

    Thank you for no music! I can think and enjoy without distraction. I appreciate your get it done mind set! What size engine is the one you are going to install?

  • @kevinfiebelkorn4715
    @kevinfiebelkorn4715 หลายเดือนก่อน +3

    I really miss those old straight 6 engines. They were so much easier to work on. From the condition of the bearings and cylinders I'd say that you have a relatively low mileage engine there. I'm looking forward to seeing you driving that truck.

  • @pete_ski
    @pete_ski หลายเดือนก่อน +2

    Great to see another video of you working on another interesting project. I'm just of to watch the first one.

  • @mimasdog1
    @mimasdog1 หลายเดือนก่อน +2

    Nice Richard!! Didn't come out so bad at all, in the end! 😊 Mamsen

  • @-DC-
    @-DC- หลายเดือนก่อน +3

    Incredible to think we went from this to Modern Day Wet Belt Junk.

    • @daleolson3506
      @daleolson3506 หลายเดือนก่อน +1

      The next version of this engine the 250 with full lubricantion was much better.

  • @joshnelson5532
    @joshnelson5532 หลายเดือนก่อน +1

    Flat head screws on an oil pan? What a nightmare! Cool to see content like this around. Quite refreshing to say the least!

    • @dog8nut
      @dog8nut หลายเดือนก่อน +1

      That is why old Chevy's were called "STOVEBOLTS"

  • @joostderidder
    @joostderidder หลายเดือนก่อน +2

    can't wait to hear this engine running!
    Great job, sir!
    Thanks for sharing.

  • @allanrichards3752
    @allanrichards3752 หลายเดือนก่อน +2

    Great video. I also tjhink this is a perfect example of why you should never try and run an engine that has sat for many years if you want to keep and use it. Like these "will it start videos" Dirt, rust, water, old oil and potentially blocked oil ways will destroy an otherwise good restorable engine.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +1

      Great point! The oil pan and valve cover is always good to remove and clean even on a good engine. There is always a lot of carbon and dirt. /Richard

  • @The_Modeling_Underdog
    @The_Modeling_Underdog หลายเดือนก่อน +3

    That was some dirty engine, right there. But, nothing was broken and it wasn't seized. Huge win.
    Maybe an unheaded warning, because I don't know when was the engine last rebuilt; be careful with those old seals. If they're the originals. they may be - just maybe - made of fiber and asbestos. Some of the shims, too.
    Looking forward to the next episode.
    Cheers.

  • @brucemitch928
    @brucemitch928 หลายเดือนก่อน +1

    Thanks for sharing Richard, good to see the whole strip down, with comments. Looking forward to the rebuild.
    BTW, your thermonuclear heating device is scary brilliant. 👍

  • @sparehead2163
    @sparehead2163 28 วันที่ผ่านมา

    Greetings from Australia love your channel which I have just found and am watching the old videos
    It's so nice to watch something that isn't from the USA I love to see all that snow looks great but I wouldn't want to live in it
    👍🇦🇺😍

  • @zonie70
    @zonie70 หลายเดือนก่อน +4

    Hello Richard , Good to see a new video from you ! Just a friendly reminder that the "T' in Chevrolet is silent. Pronounced Chev-ro-lay ! You can say it anyway you like though ! So glad you found an original engine for your truck . Scott 🌵

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +3

      Hi! If that is the only thing i didnt say right i am very proud anyway! Hehe. But thanks! I try to learn as much english as i can! Take care. /Richard

    • @zonie70
      @zonie70 หลายเดือนก่อน +4

      @ You are very good at English. The only Swedish I know is Volvo . 😊

    • @jakebrake5776
      @jakebrake5776 หลายเดือนก่อน +2

      Where I come from its pronounced "shivalay" 😂

    • @DavidMiller-s7g
      @DavidMiller-s7g หลายเดือนก่อน +2

      @@YesterdaysMachineryyour English is very good. Chevrolet happens to be a French name, which is the reason for the difference in pronunciation

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +3

      @DavidMiller-s7g Here in Sweden we say it like "chevvrolett" so that is why i have a hard time. Hehe /Richard

  • @jeremytoms5163
    @jeremytoms5163 หลายเดือนก่อน +1

    Nice to see you back in my feed. TH-cam has been weird lately, I’m having to hunt down channels I’d subscribed to, to see them at all. Nice van though.

  • @judeschexnyder8008
    @judeschexnyder8008 หลายเดือนก่อน +1

    Great video Richard.

  • @306champion
    @306champion หลายเดือนก่อน +2

    I haven't seen you here for ages mate. I do love the old stove bolt Chev. 11:52 At this point I would probably put this in an electrolysis for a couple of days. I see you have gone a bit high tech compared to your earlier videos.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +1

      Hi! Time is not always on my side! Yes electeolysis would be something. /Richard

  • @swedethour
    @swedethour หลายเดือนก่อน +3

    Kul avsnitt och video, ser fram emot nästa!

  • @PaulWannenburg
    @PaulWannenburg หลายเดือนก่อน +2

    I like the blowtorch. Can pass a new file on the top of the cylinders, it does not remove metal only dirt. You will see the original factory machining marks on the head when the file has removed all the dirt.

  • @burninpwder76
    @burninpwder76 หลายเดือนก่อน +1

    A heart of iron forgotten. Left to grease and rust and sand. Takes the skill of a craftsman true. To make it beat again.

  • @philipreiffel5077
    @philipreiffel5077 หลายเดือนก่อน +1

    I had a 216 stovebolt 6 chev in my truck, those motors had a lucky dip oli system, on an incline the oli pickups on the crank would starve the motor of oil so it got the boot for the better 235 that actually had an ioil pump and more power.

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน

      Yes a 235 is better. A Mercedes 606 is way better. But i will use the 216. Cant be that bad. We will find out! /Richard

  • @2018NukNuk
    @2018NukNuk หลายเดือนก่อน +2

    You doing it all with patience Richard, I like that!

  • @masterofnoneMB
    @masterofnoneMB หลายเดือนก่อน +3

    Love your videos! Keep up the good work!

  • @AndrewHCann
    @AndrewHCann หลายเดือนก่อน

    Excellent Video Richard :) yes 216 motor are interesting motor 👍 to take apart and rebuild up like new again too I did one years ago too! Lots those inline 6 cylinders motor so interesting and cool too! Looking forward to watch more this 216 your fixing up and first start up too in vehicle also testing out on drive!

  • @torbjorncarlsson4123
    @torbjorncarlsson4123 2 วันที่ผ่านมา

    Roligt att se dig skruva jag har alltid tyckt det är inspirerande att skruva med gamla motorer och sen få kvittensen när man får igång dom

  • @chriscansdale6389
    @chriscansdale6389 หลายเดือนก่อน +1

    With all that crud in the engine, I'm amazed you managed to get it apart so easily.. those bearings..❤ I am doing the same at the moment. Except my engine was running really nicely, but with a small head gasket leak, bearings were AWFUL, had some rust or the like go through them and marked the crank. You were very lucky!

  • @ProSimex84
    @ProSimex84 หลายเดือนก่อน +2

    Man, im just happy to see youre back so soon.

  • @fredrikfungdahl442
    @fredrikfungdahl442 หลายเดือนก่อน +1

    Big Thanks for a great show, an old friend actually spent much time whit me when I was young ( 54 today) so really like to see your video, brings up lots of memory. Br Fredrik

  • @nineteenandfortyone
    @nineteenandfortyone หลายเดือนก่อน +1

    Great Video! That Truck will be a good investment for you. Basic and reliable.

  • @pekkakoski6595
    @pekkakoski6595 หลายเดือนก่อน +3

    Hello again from Uleåborg, östriket

  • @bobpaterson1845
    @bobpaterson1845 หลายเดือนก่อน +1

    Another excellent video 👏👏 really enjoyed the meticulous strip down of the engine 👌 and considering the grot inside the engine it seemed like pistons liners crankshaft etc looked fairly well preserved 👍 look forward to the next installment 👍

  • @roberthocking9138
    @roberthocking9138 หลายเดือนก่อน

    What a find Richard , well done. Easy to see they didn’t run rust inhibitor in the radiator water, by the looks of the coolant passages being so rusty. Cheers from AUS 🇦🇺🦘

  • @WilliePipkin
    @WilliePipkin หลายเดือนก่อน

    That’s pretty cool. I’ve never had the opportunity to tear down one of those engines before.👍

  • @HAL9000-su1mz
    @HAL9000-su1mz หลายเดือนก่อน +1

    The gear drive for the cam will last forever. All-in-all, a fine example to put back in operation. I noted that there was not even a "ring ridge" atop the cylinders, which made piston removal easier. Overall, considering the poor oils back when it was new, it is not filled with sludge, as so many early engines were. A very good find and should run quite smoothly.

  • @JRattheranch
    @JRattheranch หลายเดือนก่อน +3

    Ah! Richard.... a man after my own heart.... If you can't beat it!..... Heat it!.👌👍 Amazing how similar it is in design to post war GM engines here in Europe! Actually, it's in better condition than I expected after seeing that rodent infestation! 🙏 Very similar to a postwar 218 cu in post war!

  • @michaeldallimore8590
    @michaeldallimore8590 หลายเดือนก่อน

    Good that you can still order engine parts. I have a vehicle from 1929 (a Singer Junior from the UK) and apart from a few items of old stock in Australia I have to scrounge for old used parts from various parts of the world or have them made. Great work so far, it is a good looking truck. Love watching your work. BTW my old man always told me that your hand is not a hammer (when you were removing the bearing caps).

  • @ashlynntaylor6045
    @ashlynntaylor6045 หลายเดือนก่อน

    A very interesting video. My late Father was a motor mechanic during and after WW2. In a large tool chest he had was a small red pasteboard box, nearly full of those rod and main bearing shims. Wrapped in a oily rag were a few camshaft followers, the same as in your motor. Now I know what engines and timeframe they came from. Thank you, Richard.

  • @lennartjohansson4356
    @lennartjohansson4356 หลายเดือนก่อน +3

    Ser jättebra ut, jättetrevligt att se, lycka till!!!!

  • @danpags7023
    @danpags7023 หลายเดือนก่อน

    Richard, that is a great looking engine! At first, it looked sketchy, but those bearings have minimal wear. They definitely don't make them to last like they used to. Excellent video, thank you for sharing 👍👍

  • @tomla6992
    @tomla6992 หลายเดือนก่อน

    I'm looking forward to the next episode. Greetings from a fan from the Polish city of Warsaw.

  • @nineoclockhero
    @nineoclockhero หลายเดือนก่อน +9

    I went OUCH! when the valve cover came off, but then I thought, It's probably not that bad. Just a bit of time and an extra video for us fans. 👍

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +6

      Yes! Imagine how boring this truck would have been for the viewers if it just started and run fine directly! /Richard

    • @nineoclockhero
      @nineoclockhero หลายเดือนก่อน +3

      @@YesterdaysMachinery I agree and appreciate the time and effort it take to produce these videos

  • @gvii
    @gvii หลายเดือนก่อน

    I can't believe the bottom end survived as well as it did. After that valve cover came off, things weren't looking so hot. But those rod and main bearings look like they're almost brand new. That's pretty wild.

  • @robertkeyes2654
    @robertkeyes2654 หลายเดือนก่อน

    Very impressed and so pleased with your efforts. Good luck & I'm looking forward to seeing more.

  • @MrBrendog67rat
    @MrBrendog67rat หลายเดือนก่อน +1

    Looks like all you need to do is take it all apart and clean it up. mabey some new lifters, and take the head apart and lap the valves. this looks like fun
    Brendan

    • @YesterdaysMachinery
      @YesterdaysMachinery  หลายเดือนก่อน +1

      Yes i could have just cleaned it and put it together. But there will be some new parts like rings and cam gear. Lifters are actually usable after cleanup. 12 new lifters are 700 dollars here..
      All valves was quite bad so there will be a different soulution there. Seats are ok after regrind. /Richard

  • @richardbabik8383
    @richardbabik8383 หลายเดือนก่อน

    Sorry about the condition of the valve train, that is unfortunate, but the lower end looks great, even the rings were not stuck. I love the look of 1930's trucks, Chevy and Ford. It is hard enough to work on them in the U.S., I can't image how difficult and expensive it is on the other side of the world.

  • @daveinidaho7970
    @daveinidaho7970 หลายเดือนก่อน +1

    In the late 1960s I bought a crankshaft and rods from Sears for the 216 engine in my 1952 Chevy pickup. The rods had been converted to use insert bearings but still used dippers for oiling. These engines would run forever if you didn’t over rev them.

  • @stationaryenginesworldwide
    @stationaryenginesworldwide หลายเดือนก่อน

    Great video !! Gotta go back and watch the one prior.. Thank you for providing me my evening entertainment!.. Better than anything on the tube

  • @Mishn0
    @Mishn0 หลายเดือนก่อน +2

    Wow, the bottom end looks really nice, I'm surprised because of all the seaweed on the valve train, I thought you had a boat anchor there!

  • @dekon70
    @dekon70 หลายเดือนก่อน

    This is going to be an epic build!

  • @larrydavidson3402
    @larrydavidson3402 หลายเดือนก่อน +2

    You have a good engine for a rebuild and it should turn out to be a good running one when you are finished with it.

  • @kevindaly5093
    @kevindaly5093 หลายเดือนก่อน

    I wish I was there to help. Great video.

  • @royschlickeisen2539
    @royschlickeisen2539 27 วันที่ผ่านมา

    👍👍👍👍👍great automotive video be watching for the next one.

  • @telemachus9350
    @telemachus9350 หลายเดือนก่อน

    Well done. You were a bit lucky with the state of those big ends.

  • @grahammacdonald6789
    @grahammacdonald6789 หลายเดือนก่อน

    Respect for your perserverance.The engine looked munted but you continued .Keep the faith

  • @patrickwilliams6774
    @patrickwilliams6774 หลายเดือนก่อน

    I don't miss your videos. Like your knowledge and ability.

  • @bobmoroney3643
    @bobmoroney3643 หลายเดือนก่อน +2

    Nice trick with the push rods on a belt to keep them in order! Love the old blow torch if that's what it's called? And you are very patient with your work.

  • @rikugenis7612
    @rikugenis7612 หลายเดือนก่อน

    Awesome, love your work!

  • @plainnpretty
    @plainnpretty หลายเดือนก่อน

    I prefer rebuilding motors on a table but we all have our preferences. A word of advice Don’t hit them wrenches with your hands when you get to be my age you will regret it . Looking forward to it going back together. Thanks Richard