I hope you all enjoyed the video! Make sure to subscribe so that you don't miss future videos. I am really happy with the result. It might not be perfect but thats fine. Although I think it looks even greater in person :)
@Omen2005 That is not really a simulation. I didn't have one of those. It is purely an animation to explain the walk algorithm. Edit. But the Program I used was Blender
I made sure that the battery can be disconnected and charged using an XT60 connector. Later I also made a Y splitter. This allows me to run the hexapod with the battery connected and power it from my lab power supply :)
Wow, how old are you? Don't take it the wrong ; what you did is so cool. I have been lecturing university master's students, and they are not capable of doing what you just did at home. I wish I had you as a student. Good job, keep it up!
Absolut überragend! Während andere in deinem Alter mit zocken die Zeit verschwenden programmierst und baust du etwas was viele nach ein paar Jahren Ausbildung nicht gebacken bekommen ! Mein Respekt und weiter so 😁🙌🏻
Great Job! the best pert is when your father "try" (play...) it! usaully a dad buy a robot for his children... here something gos opposite! Really good job and thanks for sharing!
Can you please provide an uncut video of the duration in which you made all the connections, I am having a hard time figuring out some things. What is the bigger connector connected to the xt60 connectors? Great work BTW! Keep it up
If you are having trouble figuring out the wiring I would recomend the GitHub page. I have a wiring diagram there :) That big conector you saw is probably my Y-splitter. For the development I wanted to make shure I could power the hexapod with my lab bench supply with the battery connected. If you have any more Issues feel free to send me an Email. I would be happy to help you :). I do have exams at the moment so I might not reply right away.
The walk animation was created in Blender. However, I wouldn't call it a simulation. I didn't have anything like that. Maybe something to explore in the future :)
Aa far as I remember the issue was the inverse kinematics model. Something about the sin wraping around from 1 to 0, but I honestly can't really remember. Also you should be able to use an esp32. However that will require some changes in code.
Unfortunately I currently can't help you. I am on vacation. But you can write me a Email at sirkuhnhero@posteo.com and I can try to help once I get home :)
Hello, very good work, you are very good, question about the PCA9685 servo control in which you solder the node, in the first or in the second, when soldering it in the second when connecting to Bluetooth, the first movement of the first three legs is done well, and the other three make the opposite movement, but if I weld it differently, leg 1 does not make movements, can you help me, thank you.
I don't quit understand what you mean. Do you mean which one of the drivers has the solder jumper for the second I2C address soldert? Feel free to send me an Email (sirkuhnhero@posteo.com) with some more information and some images or videos. I would be happy to help you :)
I soldered two male and one female XT60 connector together to create a compact y splitter. For charging I used my labbench power supply (set to 8.4V and 2A). I don't need to worry about balancing since the BMS takes care of that. Alternatively you could also use a constant current power supply (with 8.4 Volt).
hii i am trying to make this project ,and i want to know about the code and can you provide the code with out the light function becasue the code you give is not working with my project and not able decode the error .if you help me it would be a great help
That's a _really_ cool result you got there! Nice job on explaining the walk, too! I was wondering if you considered using cables/sinews on the legs, and if you did, what made you decide to go with direct servos instead. With robotic hands, for example, people often use a human-like approach with all the motors in the arm, and I was under the impression that that's more than just a space issue. As I understand it, you can get flexibility into it more easily that way (which might make 3D terrain easier, too, idk)
Thanks :) I did actually thought about it. I didn’t go that route for two reasons 1) Complexity: Using cables increases complexity compared to what I did. With more parts it becomes harder to build and more things can break. 2) Space constraints: If I wanted to use cables I deduced that I would have to mount the servos inside the body. Getting the Servos AND Electronics to fit inside the main body would not have been possible. It would have some benefits, especially for 3D terrain, but those are in my opinion not worth the added complexity. Especially for my first Hexapod.
I made sure to assemble the legs with each servo fist being moved to the center position (90 if the servo range is between 0 and 180). Since I also assembled it with each joint having a 90 degree angle I have enough movement in the Servo :)
Hi, i have printed all the mechanical parts and have all of the electronics. Can you make beginner step by step tutorial on how to upload software and make it run? Thanks Dave
Hey, quick update. I don't think I will really be able to find the time to make step by step instructions any time soon. If you problems I would recommend doing some simple Project to get to know the software. If you know how to import a Project into PlatformIO and upload it you should be mostly good to go. Sorry I can't be of more help.
@@SirKuhnhero dont worry, ill try to solve it. have you thought about making the robot more autonomous for example let him explore surroundings and do some raspbery pi object recognition? would it be possible to add more movements like for example slam atack? do you plan to update the legs with senors and let him cros some less even surfaces soon? would it be hard to use some ordinary radio control set instead of android aplication? If i make it work as is i will instal FPV and send you videos.
@@SirKuhnhero well i tried to plug everything and install ap and pugins... i am not sure if the board is communicating with visual studio or even how to check or fix it. Do you think you could uploade one cheap arduino board and send it to me for some money? if i could just plug it and it would work? the spider is nice and mecahnically good. its just if i cant get over this it will never work. or we could do a skype call, we could share screens install it together and you could later upload the video.
That's a pretty difficult question. I started with robotics by learning how to interface with servos, steppers and mature sensors like the MPU6050. I can't remember what my first robotics project was but starting simple and learning the basics of programming, interfacing with actuators (motors etc.) and electrical design is probably the best idea. If I had to give a recommendation it would probably be some sort of 4WD Car. You can get full kits that have everything you need for relatively cheap (although buying all the components yourself can be cheaper). Alternatively you can have a look around Instuctables. There are a ton of like minded makers there that upload instructions on doing everything from building 4WD Cars to advanced electronic design. Ultimately you have to find projects you are passionate about ;)
I don't know where you live, so I don't know what modules are available. But any 2s BMS should work fine if it is rated for something like 20A of current. Just make sure it also balances the cells (most should do that though).
If I dont use the LEDs, do i still need to add the module powering the LEDs? I have bought it, but it is giving output of ~21V, a huge amount of current, that will fry the servos. How do I make it work?
If you can't adjust the output voltage you don't strictly have to use it. I personally like to use a different power supply for my servos and my microcontroller. But you should be able to connect everything to the main buck converter :)
I made sure to have a XT60 connection between the battery and the rest of the system. When I want to charge the battery I can just unplug it an charge it with my lab bench power supply :)
how did you upload all the files in the microcontroller ? do i have to select and opload one by one or i can select alll the fiiles and it will be uploaded ? please tell
You will need to open the Hexapod_code folder with PlatformIO. PlatformIO will handle compiling all of the files into once you tell it to upload to your microcontroller. If you have never used PlatformIO I would recoment doing a very simple project (like a blink sketch) just to get some experience with a simpler project.
I didn't really do a simulation. I did an animation to explain my walk algorithm. I did briefly look into doing a simulation but that seems like more work than it's worth for me :)
I made a simple y splitter between the battery and the power converter. I can unplug the batter and charge it with my lap bemch power supply or alternativly charge it while the Hexapod is running. Hope this helps :)
Great project! Just before i start to print anything, how tight are the tolerances? I have my printed pretty good tuned, so i don't want any part to be "sloppy"
If you have a pretty well tuned printer it shouldn't be an issue. I would recomend printing & building a single leg first. This will also help you find the right fit for the sliprings. For those you can just add a bit of xy compensation to get just the right fit. Hope this helps :)
@@SirKuhnhero Thanks for the answer, I have now printed all the parts :P I still need to wait on some of the hardware. But i saw in you'r "to buy list" there is no Bluetooth module? but in the wiring diagram there seems to be one?
@SirKuhnhero and one more thing, maybe it's only me but when I download the files from Github some of them are only 1 kb in size, like the fusion archive file 🙂 Nice project anyway, I will build one and se for my self
@@Omen2005 Thats because those large files use Github LFS. Sadly the free tier has a bandwith cap for downloads and I reacht that some time ago. Unless this bandwith cap resets you won't be able to download those files. But you can find them on Printables ;)
I think you would only need to change the "DATA_PIN" for the LED strip and the "txBluetooth" & "rxBluetooth" for your bluetooth module in the header.h file. Since the servo driver uses I2C you probably wont need to change that if you use I2C0. You might need to change the channel for each servo depending on where you connect them on the driver (in output.cpp). You will also need to change the platform.ini file. right now it is set up to build for the stm32. I don't know what changes you need exactly but you can create a new PlatformIO project and take a look at the created platformio.ini file. That will be a good template. Just remember that you need to keep the lib_deps definition. Without them it doesn't include the required libraries.
When i am uploading code in the stm32 using stlink it is not uploading and showing this error OpenOCD init failed and on devices my stm32 is not being detected so is my stlink npt working properly ??
@@SirKuhnhero how did you upload the upload the code using st-link or FTDI programmer and if you have used an FTDI programmer can tell the exact module
I used both at some point. I don't really know the exact module, but YP-05 is written on the back. It's one of those red boards that you see everywhere. Don't know if that answers your question. Sorry, I can't be of more help.
@@SirKuhnhero i just to need to ask one more question did you flash the bootloader or you always connect the stm32 to that module and then to you pc and then upload it
Should work. I think I remember having seen some Hexapods using an arduino. I am just a little bit worried that it is not fast enough for the inverse kinematics. I have no idea how unoptimized my code is. But even if the inverse kinematics end up slowing it down, which I don't consider to be likely, it will just walk a bit slower.
The render was done in blender. Took some time but I think it paid off :) If you are talking about the simulation directory on GitHub, that was meant to me made in Unity. Although I abandobd that loong ago.
Pretty much only visuals. I did make a geometry nodes setup to get that last animation to work procedurally but that was done after. I did use simulations in Unity to learn about the IK model for the leg. That is the simulation directory on GitHub. I don’t know if it is possible to use blender for such simulations but I will look into that for future robotics projects.
@@SirKuhnhero oh man you ready for a minblowing trick? Next time you copy/paste hit windows + v instead of ctrl+v. Once activate it will store your last 20 copies for pasting. Ctrl+v still will work and paste last thing copied but wnd+v opens a menu.
That sounds awesome. I actually thought about it and did some rough calculations too. It should be possible, but it will take a lot of time and money. Unfortunately I don't have enough of either.
I don't think I will do something like this for this version. Making a video takes a LOT of time. However I do have Ideas for a v1.1, basically a very similar design but with a few small upgrades, and I might make a full tutorial for that. If you or other people have any Questions I would be more than happy to help you :)
You can just leave them out if you want to. Simply not use the #define for the LEDs in the header.h file. The Hexapod code will ignore everything that has to do with the LEDs
You can find the most important Models on Printables and Instructables. I made shure to combine all the models you need to print for a single leg into one .3mf file. That way it is much more convienient. If you also want every model individually take a look at the GitHub repo. There is also some stuff there that I couldn't upload elsewhere. All that is in the Descriptions. Hope this helps :)
You should not be soldering to the li-ion cells like that, the heat can damage them, the proper way is to spot weld them. Also just shoving cells together in parallel like that isn’t safe, I hope you at least checked the voltages before you did that. Also if you are just printing out of PLA you should be more careful with heat generating components (motors, voltage converters, heatsinks, etc), PLA softens at only 50-60 C. You also use a lot of hot glue and other semi permanent attachment solutions, that will become very annoying if you need to take it apart again, especially when gluing over bolt heads. If your LEDs draw 60 mA each at max brightness and you have 271 LEDs then that is a total of 16 A at full brightness, you will have to run the LEDs at very low brightness if you want that 5 V converter to survive. Good work though.
Thank you for the input :) You are right. You should not solder directly onto a li-ion cell. However since I got mine from an old e bike battery they still had some nickle strips that where spot welded. When I was soldering to the cell I was actually soldering to those nickle strips. Might have been hard to see. Personally I had no real problems with heat. But I also don't run it for long periods of time. I am also not the biggest fan of hot glue. But I had no real issues so far because everything I need to access regularly is not using hot glue. However I would do something different with the LEDs for the legs. I had to replace a Servo once and it quit annoying. Also you are right about the power consumption of the LEDs. When I first turned it on the buck converter was screaming in pain. However 100% brightness is way to bright anyway. I ended up using it on 1%-3% brightness.
I hope you all enjoyed the video! Make sure to subscribe so that you don't miss future videos.
I am really happy with the result. It might not be perfect but thats fine. Although I think it looks even greater in person :)
What program have you used to simulate in? In the video around 6min 🙂
It says "prototype" ok the floor
@Omen2005 That is not really a simulation. I didn't have one of those. It is purely an animation to explain the walk algorithm.
Edit. But the Program I used was Blender
Ill tell you this i can see it in your dads eyes. He is proud of you. Nice work.
Thanks :)
Your parents can be proud of you, you've done really well 👍
Thanks :>
i like how the parents had the most parents reactions.
I'm blown away how skilled you are for you're age you have a very promising career in technical design if you choose that path
Cool hexapod with LED legs!
Thnaks :D
This Hexapod looks as professional as the ones from the dancing videos... great job! :)
Thank you! :)
Очень хорошо получилось! С интересом смотрел это видео!
Glad you liked it :)
Using metal hardware to assemble is icing on the cake when 3d printing.
It takes some work to implement but it's always worth it :)
Great work, great skills, awesome music. Wirklich gut gemacht. Subscribed!
What a Chad :)
How incredible it is man, such an amazing piece of work. Cant believe you share all your work for free with us, God bless every step you take.
Thank you so much :)
Thanks for your great sharing, question: how to recharge the battery?
I made sure that the battery can be disconnected and charged using an XT60 connector. Later I also made a Y splitter. This allows me to run the hexapod with the battery connected and power it from my lab power supply :)
I have also used a xt60 connector but how can i charge the batttery can you please tell?
And what type of y splinter you have used?
Great project for a very talented young you are! What a complex machine you made! Thank you for sharing with all of us!
Glad you enjoyed it :)
The leds are an awesome addition
Thanks ;)
The lights make it so much more awesome 👌 😊
Awesome project! This deserves more views, great work!
Thanks :)
I have to tell you this have been the mosed useful video that i have found on the topic(wanting to build one of my own) so a milion thanks to you:D
Wow, how old are you? Don't take it the wrong ; what you did is so cool. I have been lecturing university master's students, and they are not capable of doing what you just did at home. I wish I had you as a student. Good job, keep it up!
Absolut überragend! Während andere in deinem Alter mit zocken die Zeit verschwenden programmierst und baust du etwas was viele nach ein paar Jahren Ausbildung nicht gebacken bekommen ! Mein Respekt und weiter so 😁🙌🏻
Danke :)
Ich habe momentan ein bisschen viel zu tun aber mein Nächstes Video sollte in ein paar Wochen kommen (hoffentlich)
Man.....well done. Keep this stuff coming!
That's the plan. Although I won't have as much time anymore :(
Great Job! the best pert is when your father "try" (play...) it! usaully a dad buy a robot for his children... here something gos opposite! Really good job and thanks for sharing!
Thanks! My Dad definitly had a lot of fun :)
Can you please provide an uncut video of the duration in which you made all the connections, I am having a hard time figuring out some things.
What is the bigger connector connected to the xt60 connectors?
Great work BTW! Keep it up
If you are having trouble figuring out the wiring I would recomend the GitHub page. I have a wiring diagram there :)
That big conector you saw is probably my Y-splitter. For the development I wanted to make shure I could power the hexapod with my lab bench supply with the battery connected.
If you have any more Issues feel free to send me an Email. I would be happy to help you :). I do have exams at the moment so I might not reply right away.
Thank-you! I wasn't even sure I would get a reply in the first place.@@SirKuhnhero
Sieht voll geil aus mit den LEDs man könnte modular oben noch irgendwas draufhauen, solarzelle, nerf gun oder sowas. Supercooles Projekt
Thanks :)
Sehr gut gebaut, liebe Grüße 🍀
Danke :)
Because Skynet needed a spider bot?! JK. 😂 Awesome work! ❤
No worries. I made shure Skynet can’t access it.
This is and looks awesome. You are a great Engineer and i hope to see more from u;)
Thank you :D
Very, very nice project.
Glad you like it :)
Bro that is AMAZING! Will subscribe.
Thank you :)
Output Voltage rating for the XL4016E1 buck converter ??
I set the Buck converter to about 5v. If that is what you are asking about :)
@@SirKuhnhero thank you brother 🖐️
@@SirKuhnhero brother I want to contact you regarding this project how can I ???
Is there any ig for you???
Feel free to write me an Email at sirkuhnhero@posteo.com. I am usually a bit slow to respond though :)
@@SirKuhnheroBrother like what was the time taken to print the complete skeleton of your robot
Looks really great!
It really does ;)
Nicely done
Well thank you :)
That is awesome!
Great job!! Very cool!
Happy you enjoyed it :D
In a later version you should add a camera in the middle of the led ring on the front. That would be awesome. Otherwise thats cool as hell
Sounds awesome. With the current design I might be able to put one on top :)
great video.what software did you use for the walk simulation that you showed ?
The walk animation was created in Blender. However, I wouldn't call it a simulation. I didn't have anything like that. Maybe something to explore in the future :)
Let me ask, I'm having the same problem as time 8:57, how can I fix it? Also, instead of using Hc-05 module, can I use esp32? Thank you.
Aa far as I remember the issue was the inverse kinematics model. Something about the sin wraping around from 1 to 0, but I honestly can't really remember. Also you should be able to use an esp32. However that will require some changes in code.
@@SirKuhnhero Hope you can help me, I fixed it but everything makes no sense. And importantly, the app you sent cannot connect to bluetooth
docs.google.com/document/d/1IoS9caU5AxHzBd14yKo2bQGcDBTfD60pcD1-tFsI6AE/edit?usp=drivesdk
I fixed it but bluetooth cannot connect.
Unfortunately I currently can't help you. I am on vacation. But you can write me a Email at sirkuhnhero@posteo.com and I can try to help once I get home :)
@@SirKuhnhero Thank you, I have fixed it. The next problem is that I'm having trouble setting the angle.
Hello, very good work, you are very good, question about the PCA9685 servo control in which you solder the node, in the first or in the second, when soldering it in the second when connecting to Bluetooth, the first movement of the first three legs is done well, and the other three make the opposite movement, but if I weld it differently, leg 1 does not make movements, can you help me, thank you.
I don't quit understand what you mean. Do you mean which one of the drivers has the solder jumper for the second I2C address soldert? Feel free to send me an Email (sirkuhnhero@posteo.com) with some more information and some images or videos. I would be happy to help you :)
Which type of y splinter have you used to charge the battery and are there any other ways to charge the battery?
I soldered two male and one female XT60 connector together to create a compact y splitter. For charging I used my labbench power supply (set to 8.4V and 2A). I don't need to worry about balancing since the BMS takes care of that. Alternatively you could also use a constant current power supply (with 8.4 Volt).
I am not getting a proper idea about what are you talking about can you give your mail so i can send you the images of my hexa pod circuit?
Sure. You can send me a mail to sirkuhnhero@posteo.com
hii i am trying to make this project ,and i want to know about the code and can you provide the code with out the light function becasue the code you give is not working with my project and not able decode the error .if you help me it would be a great help
That's a _really_ cool result you got there!
Nice job on explaining the walk, too!
I was wondering if you considered using cables/sinews on the legs, and if you did, what made you decide to go with direct servos instead.
With robotic hands, for example, people often use a human-like approach with all the motors in the arm, and I was under the impression that that's more than just a space issue. As I understand it, you can get flexibility into it more easily that way (which might make 3D terrain easier, too, idk)
Thanks :)
I did actually thought about it. I didn’t go that route for two reasons
1) Complexity: Using cables increases complexity compared to what I did. With more parts it becomes harder to build and more things can break.
2) Space constraints: If I wanted to use cables I deduced that I would have to mount the servos inside the body. Getting the Servos AND Electronics to fit inside the main body would not have been possible.
It would have some benefits, especially for 3D terrain, but those are in my opinion not worth the added complexity. Especially for my first Hexapod.
why all the leg are still folded since every servo in existence allow 180 to 270 degree freedom ?
I made sure to assemble the legs with each servo fist being moved to the center position (90 if the servo range is between 0 and 180). Since I also assembled it with each joint having a 90 degree angle I have enough movement in the Servo :)
@@SirKuhnhero so you wasted 90 in the worst position possible leting it folded all the time ?
Hi, i have printed all the mechanical parts and have all of the electronics. Can you make beginner step by step tutorial on how to upload software and make it run? Thanks Dave
I can try and update the instrucables instructions a bit and make then more like step by step guid. Once I do that I can update you here :)
Hey, quick update. I don't think I will really be able to find the time to make step by step instructions any time soon. If you problems I would recommend doing some simple Project to get to know the software. If you know how to import a Project into PlatformIO and upload it you should be mostly good to go.
Sorry I can't be of more help.
@@SirKuhnhero dont worry, ill try to solve it. have you thought about making the robot more autonomous for example let him explore surroundings and do some raspbery pi object recognition? would it be possible to add more movements like for example slam atack? do you plan to update the legs with senors and let him cros some less even surfaces soon? would it be hard to use some ordinary radio control set instead of android aplication? If i make it work as is i will instal FPV and send you videos.
That sounds awsome. I have definitly thought about autonomus navigation but I think that is still a long way off :)
@@SirKuhnhero well i tried to plug everything and install ap and pugins... i am not sure if the board is communicating with visual studio or even how to check or fix it. Do you think you could uploade one cheap arduino board and send it to me for some money? if i could just plug it and it would work? the spider is nice and mecahnically good. its just if i cant get over this it will never work. or we could do a skype call, we could share screens install it together and you could later upload the video.
Great job!
Thanks!
niceeeeee deserve way more followers
Thanks :D
Hey where do I start with… to get into robotics , I wanna build one myself this way it’s amazing
That's a pretty difficult question. I started with robotics by learning how to interface with servos, steppers and mature sensors like the MPU6050. I can't remember what my first robotics project was but starting simple and learning the basics of programming, interfacing with actuators (motors etc.) and electrical design is probably the best idea.
If I had to give a recommendation it would probably be some sort of 4WD Car. You can get full kits that have everything you need for relatively cheap (although buying all the components yourself can be cheaper).
Alternatively you can have a look around Instuctables. There are a ton of like minded makers there that upload instructions on doing everything from building 4WD Cars to advanced electronic design.
Ultimately you have to find projects you are passionate about ;)
@@SirKuhnherothanks a lot!
Nice invention ❤❤🎉
Thank you ;)
Looks sick!
Thanks :)
Can you suggest a replacement for hx-2s-jh20 BMS which you have given in ur list on instructables (2:16 ) That module is not available in my area
I don't know where you live, so I don't know what modules are available. But any 2s BMS should work fine if it is rated for something like 20A of current. Just make sure it also balances the cells (most should do that though).
I live in india , mumbai and everywhere it is out of stock . So Hx-2s-D20 is available should i use that ?
And can i use mgn995 instead of mgn996 ?
Thanks for replying
Sorry for asking so many questions 😅
Love it!
Thanks :)
If I dont use the LEDs, do i still need to add the module powering the LEDs?
I have bought it, but it is giving output of ~21V, a huge amount of current, that will fry the servos.
How do I make it work?
If you can't adjust the output voltage you don't strictly have to use it. I personally like to use a different power supply for my servos and my microcontroller. But you should be able to connect everything to the main buck converter :)
While watching the vid, I thought you had like 10k subs, Very Good vid :) you might want use another micro controller as software serial
Thanks for the idea! I recently got a STLink V2 which works wonderfully, but I'll look into your suggestion :)
What software did you use for this animation/video at @6:40?
That was done in Blender. Just some keyframes, nothing to complex :)
@@SirKuhnhero a man of many talents!
@@WalterSamuels Thanks!! :D
Can you tell me how you will easily charge the battery when its drained? There is no usb on that pcb to charge
I made sure to have a XT60 connection between the battery and the rest of the system. When I want to charge the battery I can just unplug it an charge it with my lab bench power supply :)
I have also built thiss but i have not understood how you have recharged the battery
how did you upload all the files in the microcontroller ? do i have to select and opload one by one or i can select alll the fiiles and it will be uploaded
? please tell
You will need to open the Hexapod_code folder with PlatformIO. PlatformIO will handle compiling all of the files into once you tell it to upload to your microcontroller. If you have never used PlatformIO I would recoment doing a very simple project (like a blink sketch) just to get some experience with a simpler project.
Did you make a simulation of the robot?
I did not :)
could u tell me what kind of material did you use for the 3D printing parts
I used PLA. But it doesn't really matter as long as you don't use something super flexible.
@@SirKuhnhero im gonna do ur project but if i have problem can i contact u ?
@@bavin1780 Sure. The best way to contact me is through Email (sirkuhnhero@posteo.com)
which software did you use for simulation??
I didn't really do a simulation. I did an animation to explain my walk algorithm. I did briefly look into doing a simulation but that seems like more work than it's worth for me :)
Hello, please tell me how to charge your Haxapod?🤔
I made a simple y splitter between the battery and the power converter. I can unplug the batter and charge it with my lap bemch power supply or alternativly charge it while the Hexapod is running.
Hope this helps :)
Great project! Just before i start to print anything, how tight are the tolerances? I have my printed pretty good tuned, so i don't want any part to be "sloppy"
If you have a pretty well tuned printer it shouldn't be an issue. I would recomend printing & building a single leg first. This will also help you find the right fit for the sliprings. For those you can just add a bit of xy compensation to get just the right fit.
Hope this helps :)
@@SirKuhnhero Thanks for the answer, I have now printed all the parts :P I still need to wait on some of the hardware.
But i saw in you'r "to buy list" there is no Bluetooth module? but in the wiring diagram there seems to be one?
You are right. I completly forgot to add it.
It's an HC-05 but I also updated the Parts (toBuy) file if you want to use that.
@SirKuhnhero and one more thing, maybe it's only me but when I download the files from Github some of them are only 1 kb in size, like the fusion archive file 🙂
Nice project anyway, I will build one and se for my self
@@Omen2005 Thats because those large files use Github LFS. Sadly the free tier has a bandwith cap for downloads and I reacht that some time ago. Unless this bandwith cap resets you won't be able to download those files.
But you can find them on Printables ;)
can this be done without the LEDs?
Absolutely, the code is designed to handle that. Some people have actually build my Hexapod design and as of now all of them chose to ignore the LEDs.
Nice
Thanks, I am very proud of it :)
Hii , which code files we have to upload in the stm32 only the header.h or all the files like math , output , ik , Bluetooth and header also
You will have to upload all of them using PlatformIO.
Okk thanks
i dont get the part how did you upload the codes to the hexa code is is like arduino or what i just didnt get that part
For the Microcontroller I used an STM32, which I programmed using an ST-Link and the PlatformIO addon for VS Code.
What changes do i have to bring to the code if want to use adruino other than changing the pins where servo and other things will be connected ?
I think you would only need to change the "DATA_PIN" for the LED strip and the "txBluetooth" & "rxBluetooth" for your bluetooth module in the header.h file. Since the servo driver uses I2C you probably wont need to change that if you use I2C0. You might need to change the channel for each servo depending on where you connect them on the driver (in output.cpp). You will also need to change the platform.ini file. right now it is set up to build for the stm32. I don't know what changes you need exactly but you can create a new PlatformIO project and take a look at the created platformio.ini file. That will be a good template. Just remember that you need to keep the lib_deps definition. Without them it doesn't include the required libraries.
@@SirKuhnhero thank you so much
There were 2 connections of servo on the stm32 on A7 AND A6 so are they anolog or didgital outpit pins ?
Do you mena B6 and B7? I think those are digital pins. But more importantly, they are the pins for the I2C bus.
@@SirKuhnhero thanks
When i am uploading code in the stm32 using stlink it is not uploading and showing this error OpenOCD init failed and on devices my stm32 is not being detected so is my stlink npt working properly ??
I have honestly no idea. Every time I get one of those errors I end up fixing it without really knowing how. I just Google stuff until it works again.
@@SirKuhnhero how did you upload the upload the code using st-link or FTDI programmer and if you have used an FTDI programmer can tell the exact module
I used both at some point. I don't really know the exact module, but YP-05 is written on the back. It's one of those red boards that you see everywhere. Don't know if that answers your question. Sorry, I can't be of more help.
@@SirKuhnhero it helped
@@SirKuhnhero i just to need to ask one more question did you flash the bootloader or you always connect the stm32 to that module and then to you pc and then upload it
What servos are you using?
I am using MG996R servos
can we use adruino instead of stm32 ?
Should work. I think I remember having seen some Hexapods using an arduino. I am just a little bit worried that it is not fast enough for the inverse kinematics. I have no idea how unoptimized my code is. But even if the inverse kinematics end up slowing it down, which I don't consider to be likely, it will just walk a bit slower.
Time to scale it up and put some people in it. Next gen cars watch out these new babies are all terrain.
That would be sick!! I love it :)
What program was the simulation render done in?
The render was done in blender. Took some time but I think it paid off :)
If you are talking about the simulation directory on GitHub, that was meant to me made in Unity. Although I abandobd that loong ago.
@@SirKuhnhero so was the blender purely visual, or you coded the robot and tested the code in blender?
Pretty much only visuals. I did make a geometry nodes setup to get that last animation to work procedurally but that was done after.
I did use simulations in Unity to learn about the IK model for the leg. That is the simulation directory on GitHub.
I don’t know if it is possible to use blender for such simulations but I will look into that for future robotics projects.
Wait you can use vs code to program an ar🤯
What you mean with "ar"?
@@SirKuhnhero arduino i meant.
It was honestly a supries for me too when I first found out a few years back. Can't imagine how I got things done before.
@@SirKuhnhero oh man you ready for a minblowing trick? Next time you copy/paste hit windows + v instead of ctrl+v. Once activate it will store your last 20 copies for pasting. Ctrl+v still will work and paste last thing copied but wnd+v opens a menu.
I have just tried it and WOW. I used to copy and temporarily paste into an emty text file but this makes it so much easyer. Thank You so much :)
👏👏👏👏👏👏👏👏👏👏👏
Thanks :)
this is so cool. how much does it cost in total?
ok i saw it.
8:00 Debug via LEDs in Binary oh god 😂
Yea that was a pain. But better than nothing :)
Now build a giant one you can ride on.
That sounds awesome. I actually thought about it and did some rough calculations too. It should be possible, but it will take a lot of time and money. Unfortunately I don't have enough of either.
@@SirKuhnhero haha i hear you there.
i think we need a good tutorial for this bc i cant understand most of it
I don't think I will do something like this for this version. Making a video takes a LOT of time. However I do have Ideas for a v1.1, basically a very similar design but with a few small upgrades, and I might make a full tutorial for that. If you or other people have any Questions I would be more than happy to help you :)
@@SirKuhnhero thank you so much but i have all the parts exept the LEDs what if i dont put LEDs on the project what should i do ?
You can just leave them out if you want to. Simply not use the #define for the LEDs in the header.h file. The Hexapod code will ignore everything that has to do with the LEDs
The models?
You can find the most important Models on Printables and Instructables. I made shure to combine all the models you need to print for a single leg into one .3mf file. That way it is much more convienient. If you also want every model individually take a look at the GitHub repo. There is also some stuff there that I couldn't upload elsewhere.
All that is in the Descriptions. Hope this helps :)
You should not be soldering to the li-ion cells like that, the heat can damage them, the proper way is to spot weld them. Also just shoving cells together in parallel like that isn’t safe, I hope you at least checked the voltages before you did that.
Also if you are just printing out of PLA you should be more careful with heat generating components (motors, voltage converters, heatsinks, etc), PLA softens at only 50-60 C.
You also use a lot of hot glue and other semi permanent attachment solutions, that will become very annoying if you need to take it apart again, especially when gluing over bolt heads.
If your LEDs draw 60 mA each at max brightness and you have 271 LEDs then that is a total of 16 A at full brightness, you will have to run the LEDs at very low brightness if you want that 5 V converter to survive.
Good work though.
Thank you for the input :)
You are right. You should not solder directly onto a li-ion cell. However since I got mine from an old e bike battery they still had some nickle strips that where spot welded. When I was soldering to the cell I was actually soldering to those nickle strips. Might have been hard to see.
Personally I had no real problems with heat. But I also don't run it for long periods of time.
I am also not the biggest fan of hot glue. But I had no real issues so far because everything I need to access regularly is not using hot glue. However I would do something different with the LEDs for the legs. I had to replace a Servo once and it quit annoying.
Also you are right about the power consumption of the LEDs. When I first turned it on the buck converter was screaming in pain. However 100% brightness is way to bright anyway. I ended up using it on 1%-3% brightness.
Mach eine Schnauze für den Roboter
That sounds like it would look awsome. Thanks for the idea ;)