You’re right this is a great value, most loopers with drummers only have 10 beats. You did such a good job I’m ordering one today March 9th 2019 Thank You So Much You’re an excellent presenter
I recently bought this looper and have been enjoying it. It is easy to use. I run my keyboard into it and then run the looper through my mixer and out to a surround sound. My question to you is how do you know when the cabinet compensation is on or off? That is not clearly explained in the direction manual. So if you can give some clarity on that Id appreciate it. Thanks for your video.
Miałem to urządzenie i testowałem je przez dwa dni.Wgrałem trzy loopy z dobrym rezultatem(w trakcie zapisywania w pamięci trwałej zawiesił się i straciłem godzinę pracy).Pdłączyłem przez USB do laptopa i okazało się że nie skomunikował się z kompem mimo wielu prób z nowymi kablami.Oddałem do sklepu z żalem bo miał wiele zalet np realistyczne loopy perkusyjne.Pozostanę przy RC3.
Just got the Loop Core Deluxe, my first loop pedal. Sounds crazy but during playback the pedal delays 2-3 seconds between playbacks. What could I be doing wrong?
Hi when you talked about automatic tempo detection I haven’t figured out. How to program it the way it only starts on my tempo it only follows it’s programmed tempo. Thanks b
Hello, nice and clear explanation in the video, just wanted to ask one question. Is it possible to have a foot controlled tap tempo and at the same time use the switches for switching between phrases?
It appears you can only use the Ctrl In for switching phrases OR tap tempo/clear depending which jack you are connected to on the included NMP-2 footswitch.
Thanks for the best demo of this pedal that I found so far. Your the only one showing using phrases. Thank you, but man.. Blink somtime. your eyes will dry out. New Sub.
anyone else find the metronome on this pedal is inaccurate? its not consistent, i've used the tap tempo to sync to songs, after like 2-3 bars, the tempo just goes off
Can you tell me if this is possible? I would like to have 2 outputs so that the UNLOOPED guitar sound goes through my main amp and the LOOPED sound plays back through my second amp only when I hit "Play". I would like to have the effect of a second guitarist playing playing rhythm only when I solo, and only through my second amp. I don't think it will sound great for 2 different guitar sounds to come from the same amp that's already pushed hard. The interaction will not be nice.
Thanks for watching! It looks like the mixer output can be set to output only drums, but not the setup you are describing. I think you could accomplish your goal by using an AB box like the EHX Switchblade Plus. Plug the guitar in to the Switchblade and one out to your main amp and the other to the looper and secondary amp. Hopefully this helps!
I have not experienced this problem and I haven't heard of anyone having this problem yet. You may want to check the cable and connection by swapping it out with another TRS cable. If that doesn't work, I would recommend contacting NUX for assistance.
a pedal with very incomplete manal. it cost to mch time to learn how it works! and how works with the nmp-2???? I don't get it... when I stop with the nmp-2 it stops playing bt at the same time it changes the memory location and more of this not good working stuff
Thanks for watching! I haven't found a place online to listen to all the drum loops on the unit. The closest thing is probably to watch a few of the demos here on TH-cam to get an idea of a few different drum loops. Sorry that I don't have a better answer at the moment!
@@WeightlessJ I just completed a video that demos all 40 drum patterns in the pedal. You can check it out by following this links, if you'd like. th-cam.com/video/6DCCpoI9GtA/w-d-xo.html
@@WeightlessJ hey man don't you just go into your TH-cam settings and turn on notifications I think. I know I get notification if a new Uncle Doug video comes on. Or at least I used to, I don't know if he uploaded anything lately. And pretty spiffy that this guy went ahead and loaded up those drum sounds and published the link just on you asking... Very cool!
My foot switch does absolutely nothing. It has power to it and I can stop a loop with it but it won't do anything else. Anyone else have this issue with nux?
The foot switch is quirky at best, there is a switch on the back, Latch Open Closed, try messing with that, I cannot find applicable info on that switch
Did you ever figure this out? Mine is doing the same thing so I can't get it to switch between recorded tracks basically defeating the purpose of the foot switch.
nux looper i have big throuble with start, stop , clear and undo it is complicated and conect one outout on eff pedal and one on mixer it do not work no more nux ...! i ask my self why additional pedal it is not functional!
You double tap to stop. Bend over for everything. Even with an external foot switch. The part where he cleared the loop was edited. Probably because it doesn't silent clear. You advertise it as best looper for live musicians. You guys are out of mind.
im disapoint with tgat looper i cant start ,stop, clear, record,undo is to complicated it is not good to live i thing will pot in garbage.Im angry disapoint ,sad,all
@@bortchy Sell it on ebay dont throw away. Best looper in the world is Jamman solo xt. Buy it with an external footswitch. You wont regret You can buy two and synch them so youd have 2 channel looper
@@tarkanyilmaz6905 but i try to stop and i pres buton ah it is bad pedal and now for 1 hour is empty bathery im angry disapoint than is bether preparing home playbacks poting on telephone without destroyimg nerw is copmplicated manual is big crap im puting it in garbage with electronic conainer.Im lost time ,money ,nerv .Owner manual is so stupid unclear.Ok for young people is ok but for me only garbage solve my throuble NUX IS SHIT CRAP FOR ME.
nux looper i have big throuble with start, stop , clear and undo it is complicated and conect one outout on eff pedal and one on mixer it do not work no more nux ...! i ask my self why additional pedal it is not functional!
The foot switch is quirky at best, there is a switch on the back, Latch Open Closed, try messing with that, I cannot find applicable info on that switch, I think it should be set to Latch
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
You’re right this is a great value, most loopers with drummers only have 10 beats. You did such a good job I’m ordering one today March 9th 2019 Thank You So Much You’re an excellent presenter
Thanks for watching and for the kind words. Glad you found the video helpful!
Did you already get it? I'm trying to use tap tempo properly, but I'm not being successful.
I recently bought this looper and have been enjoying it. It is easy to use. I run my keyboard into it and then run the looper through my mixer and out to a surround sound. My question to you is how do you know when the cabinet compensation is on or off? That is not clearly explained in the direction manual. So if you can give some clarity on that Id appreciate it. Thanks for your video.
Hi Nick! Very nice video! I have a question though: Is it possible to make the Stop Mode stardard for all the loops?
Thanks!
I Just bought one and my NPM footswitch does not have a close or latch switch. is that normal? I cannot seem to find anything on this.
Miałem to urządzenie i testowałem je przez dwa dni.Wgrałem trzy loopy z dobrym rezultatem(w trakcie zapisywania w pamięci trwałej zawiesił się i straciłem godzinę pracy).Pdłączyłem przez USB do laptopa i okazało się że nie skomunikował się z kompem mimo wielu prób z nowymi kablami.Oddałem do sklepu z żalem bo miał wiele zalet np realistyczne loopy perkusyjne.Pozostanę przy RC3.
ja vrzi ga v smeti kot bom jaz.Sem mislil da je to bolj enostavno pa ni.Zal mi je da nisem kupil kaj drugega kak Tc helicon
Just got the Loop Core Deluxe, my first loop pedal. Sounds crazy but during playback the pedal delays 2-3 seconds between playbacks. What could I be doing wrong?
Hi when you talked about automatic tempo detection I haven’t figured out. How to program it the way it only starts on my tempo it only follows it’s programmed tempo. Thanks b
Nice tutorial/demo ver y helpful
Hello, nice and clear explanation in the video, just wanted to ask one question. Is it possible to have a foot controlled tap tempo and at the same time use the switches for switching between phrases?
It appears you can only use the Ctrl In for switching phrases OR tap tempo/clear depending which jack you are connected to on the included NMP-2 footswitch.
@@NewarkMusical You are correct, though my manual states A jack can also Stop during recording, dubbing, and playback...same as double tap...
JamMan XT syncs to the SDRUM, I believe, which would probably give a better drum solution. I'd like to see the loopers compared.
Can i stop ALL with only once press on switch pedal?
Thanks for the best demo of this pedal that I found so far. Your the only one showing using phrases. Thank you, but man.. Blink somtime. your eyes will dry out. New Sub.
anyone else find the metronome on this pedal is inaccurate? its not consistent, i've used the tap tempo to sync to songs, after like 2-3 bars, the tempo just goes off
didnt work for me saving and all those other things apparently take more than what you see here
Just scored one for $150AUD free delivery! Customer returned, money-back guarantee.
Bye Bye Boss RC-2
Can you tell me if this is possible? I would like to have 2 outputs so that the UNLOOPED guitar sound goes through my main amp and the LOOPED sound plays back through my second amp only when I hit "Play". I would like to have the effect of a second guitarist playing playing rhythm only when I solo, and only through my second amp. I don't think it will sound great for 2 different guitar sounds to come from the same amp that's already pushed hard. The interaction will not be nice.
Thanks for watching! It looks like the mixer output can be set to output only drums, but not the setup you are describing. I think you could accomplish your goal by using an AB box like the EHX Switchblade Plus. Plug the guitar in to the Switchblade and one out to your main amp and the other to the looper and secondary amp. Hopefully this helps!
Use A/Splitter, 1 line goes to looper 1 line goes to amp not in looper chain
Thanks James!
@@jamesBrian-lu4kj
The cable to conect the external foot is stereo?
Yes.
Its a TRS cable.
How can I save my recordings?
That does not work for me as described in the manual ^^
3:58 there is the answer. Exactly what I needed :-). Cool! Thank you!
I have problem with foot switch, its not changing phrases, did someone else had this problem?
I have not experienced this problem and I haven't heard of anyone having this problem yet. You may want to check the cable and connection by swapping it out with another TRS cable. If that doesn't work, I would recommend contacting NUX for assistance.
plug it in to a/b out
a pedal with very incomplete manal. it cost to mch time to learn how it works! and how works with the nmp-2???? I don't get it... when I stop with the nmp-2 it stops playing bt at the same time it changes the memory location and more of this not good working stuff
anywhere we can hear the drum loops before buying?
Thanks for watching! I haven't found a place online to listen to all the drum loops on the unit. The closest thing is probably to watch a few of the demos here on TH-cam to get an idea of a few different drum loops. Sorry that I don't have a better answer at the moment!
@@NewarkMusical Thanks anyhow.. BTW.. Nice video.
@@WeightlessJ I just completed a video that demos all 40 drum patterns in the pedal. You can check it out by following this links, if you'd like. th-cam.com/video/6DCCpoI9GtA/w-d-xo.html
I just saw this! I wish youtube had a way to notify me when someone replies, so I could have seen it 2 months ago. THANK YOU SO MUCH!
@@WeightlessJ hey man don't you just go into your TH-cam settings and turn on notifications I think. I know I get notification if a new Uncle Doug video comes on. Or at least I used to, I don't know if he uploaded anything lately. And pretty spiffy that this guy went ahead and loaded up those drum sounds and published the link just on you asking... Very cool!
My foot switch does absolutely nothing. It has power to it and I can stop a loop with it but it won't do anything else. Anyone else have this issue with nux?
The foot switch is quirky at best, there is a switch on the back, Latch Open Closed, try messing with that, I cannot find applicable info on that switch
on latch and a/b out put
Did you ever figure this out? Mine is doing the same thing so I can't get it to switch between recorded tracks basically defeating the purpose of the foot switch.
nux looper i have big throuble with start, stop , clear and undo it is complicated and conect one outout on eff pedal and one on mixer it do not work no more nux ...! i ask my self why additional pedal it is not functional!
You double tap to stop. Bend over for everything. Even with an external foot switch. The part where he cleared the loop was edited. Probably because it doesn't silent clear. You advertise it as best looper for live musicians. You guys are out of mind.
im disapoint with tgat looper i cant start ,stop, clear, record,undo is to complicated it is not good to live i thing will pot in garbage.Im angry disapoint ,sad,all
@@bortchy Sell it on ebay dont throw away. Best looper in the world is Jamman solo xt. Buy it with an external footswitch. You wont regret You can buy two and synch them so youd have 2 channel looper
@@tarkanyilmaz6905 but i try to stop and i pres buton ah it is bad pedal and now for 1 hour is empty bathery im angry disapoint than is bether preparing home playbacks poting on telephone without destroyimg nerw is copmplicated manual is big crap im puting it in garbage with electronic conainer.Im lost time ,money ,nerv .Owner manual is so stupid unclear.Ok for young people is ok but for me only garbage solve my throuble NUX IS SHIT CRAP FOR ME.
would be even better if you had tuned your guitar. It’s flat and i can’t listen to it
nux looper i have big throuble with start, stop , clear and undo it is complicated and conect one outout on eff pedal and one on mixer it do not work no more nux ...! i ask my self why additional pedal it is not functional!
The foot switch is quirky at best, there is a switch on the back, Latch Open Closed, try messing with that, I cannot find applicable info on that switch, I think it should be set to Latch