Just did my Acuras Lights with this kit. Quickly realised that Power sandings was Dumb...Being both Klunky and V hard to properly control. Ended up using 800 Grit wet 'n dry I had on hand (not Kit supplied) to wet sand the lenses fully.. until the residue was no longer yellowish. About 5 mins Max. Then used 1500 (I had) for another ~3 mins. Had to use the wee 3000 Disc (agaIin by hand !) as I couldn't find my supply of 3000 ... Grrr. ONlY used the Drill for the Blue Foamy ball /polish Which worked well Lights are ~90% of new.. Be aware that the masking tape paint edge protection litterally falls off when wetted Another reason NOT to use a powerdrill As You risk chewing the hell out of the paint ...unless unnaturally carefull How long will they stay that way ..Remains an open question though. Short answer ONLY part of the Kit I found usable was the Blue Foam Ball and the Polish.
Just did my Acuras Lights with this kit. Quickly realised that Power sandings was Dumb...Being both Klunky and V hard to properly control.
Ended up using 800 Grit wet 'n dry I had on hand (not Kit supplied) to wet sand the lenses fully.. until the residue was no longer yellowish.
About 5 mins Max. Then used 1500 (I had) for another ~3 mins. Had to use the wee 3000 Disc (agaIin by hand !) as I couldn't find my supply of 3000 ... Grrr. ONlY used the Drill for the Blue Foamy ball /polish Which worked well Lights are ~90% of new.. Be aware that the masking tape paint edge protection litterally falls off when wetted Another reason NOT to use a powerdrill As You risk chewing the hell out of the paint ...unless unnaturally carefull
How long will they stay that way ..Remains an open question though.
Short answer ONLY part of the Kit I found usable was the Blue Foam Ball and the Polish.
Thank you for the quick review
I just did my 2001 toyota tundra and it did a good job
Nice. Thanks bro
Mine were too far gone, have to buy bew lights
Tape off your area so no damage happens to it