3G Uphill Dual Shield Flux Core D1.1 Test
ฝัง
- เผยแพร่เมื่อ 1 ก.ค. 2018
- In today's lesson we are doing some 3g uphill flux core with a backing strip. Root, hot, fill and cap on some half inch plate. Hope this helps you out! Don't forget to share and subscribe if you haven't done so!
- แนวปฏิบัติและการใช้ชีวิต
👇WeldTube Store👇
www.weldlife.com
This test is what I'm going to be taking tomorrow, but on 1" plate. Should I increase my volts and wfs like maybe 30 and 400??
How can I get in touch with you do you have a number
This guy taught me how to weld from TH-cam 🙏🏽💯 no lie 4 years ago I withdrew from welding school watched this video before an entry weld test and ended up passing all positions on first try and was offered a 1st class welder job 🙏🏽💪🏽💪🏽❤️ I appreciate you bro but unfortunately I switched industries and now build airplanes plans but I’ll never forget you changed my life bro much love 💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽
I never seen him remove the slag
“Burn learn and eventually y’all gonna earn” 💪🏽
the more u burn the more u learn
@@user-gq8hf3kq6v I learned because of all that I burned
not in Florida
@@jedhatcher252 how so? I know some tig welders out there making good money
Depends on different factors. There is more than one type of welder. Each has In my area pipe makes more than structural. Tig>Mig. Some areas are saturated with structural welders.
I usually don't make comments on these kind of videos but, Thanks for the encouraging the new welders out there. As a guy with over a decade, I needed something like this back when I first hit the road. I had Jodi from weldingtipsandtricks but he wasn't like you. You can tell that you teach and probably deal with frustration from your students. Keep going bro you really are helping 💯 💪!
I’m 65 been welding for 50 years u very sharp keep up the great work and video I watch so you can remind me of all the shit I have forgotten thanks
@Weldtube if i was learning how to weld all over again, id spend money to learn from you...well spoken, knowledgeable and you take the time to explain the setups you use (rare quality)...ive been welding around 20 years but im not above learning new tricks from your posts...your page is gonna help add to the next gen of welders...thanks for sharing your time and knowledge
Great video. Showed this to my son who is going to a tech school for welding. Gave me some tips as well. I am bye no means a certified welder but have been stick and mig welding since highschool and you have enlightened me to a few new tricks that i can use to improve on my skills. Thank you
I have been welding for 15 years and i have never seen a guy his age have so much knowledge.... I have seen him mig, tig and stick and beautiful welds everytime this guy is very talented i always tell my apprentices to watch his videos to learn all the different procedures.
Very good video really good informational! I'm about to go do the 3g 4g flux test for work and I learn a lot from your advice, I'm going to run it exactly how you demonstrated it, so much appreciated! 💯
I'm greatful for this channel if I didn't have this I wouldn't be able to pass my test for the simple tips and tricks he taught us! Thank you very much for everything I'm working for a union and making 38 an hour doing flux !! Couldn't be more happy and blessed
Where at?? 😭 I’m doing flux in Houston for 18 an hour 🙃
@@josepacheco9479 nah fr
You ever live in citra FL?
I'm a beginner in this welding World but I really liked this video. Greeting from dominican republic..
Dale hermano.. Puerto Plata.! Me encanta!
Greetings from the US!
Greetings from ls los Santos lmao
It’s nice to see a young man who wants to be the best at his craft. It SHOWS !!!
I really enjoy these non standard application/process videos, no one else is making this kind of content! Awesome video!
almost every other welding channel makes this content and better
No lie your one of the few that run a high setting for 3up that I’ve seen on TH-cam. Good stuff
Higher the settings the more it burns and pours the metal into the weld plate.
I’m in welding school right now stuck on this particular section, and I gotta say man I appreciate you for this video because it’s taught me a lot !
Excellent presentation
Good subject matter for flux core
Always keeping in mind what the WPS calls out
No WPS no clear understanding of your weld qualifications testing
Keep up the good work that you do In your presentations
as great as this video is, what he's not showing you:
- thoroughly clean w/ a wire wheel or grinder between each pass
-allow the plate to cool some between passes so it doesn't warp too much
WPS sometimes don’t allow wire wheel or a grinder. Be prepared and use a brush and chipping hammer (sharpened).
He tells in the video a couple of times thats its important to clean between te beads
@@waynekoshiway8657 Yeap. For sure no grinding on root pass or cap as far as AWS goes.
thought the backing strip acted as a means to prevent distortion so you could put multiple passes without waiting ?
@@joejitsucomics2456 backing strip is so the groove isn't open root. You are thinking of "Strong back" plates. The only thing I've waited for cooling is before you do the cap. That way your beads do exactly what you want with the desired penetration, fusion, and visual look of it.
So nervous for this test. Glad I could watch this and learn. Thanks.
Wow!! thanks man, I'm going for a job test on Monday. for the job i found newly, and this was exactly the test i was told I'm going to meet there , and now i have learnt a lot on this VIDEO i pray 👏 that i pass the test and get the JOB BIG tho I was told it's 6 PASS all the same. THANKS MAN 👍👍
Did you get the test :)
Nice stuff bro I've learned a lot off your videos, thank you..
Love the video and your patience . Good shit it's videos like this that help people ...
That was a perfect root ...good video .. Love your work ...keep it up
I juts passed a weld test by using this advice, Thank You very much!
My first weld test this Thursday and I’ve done everything but fluxcore...I think I’m confident I’ll pass. Thank you for uploading this video it has all the details & exactly what I needed to see. Wish me luck 🙏🏼
was your test with gas?
Did you pass?
How'd it go my first is Monday
"We're gonna drag all the way up"
Proceeds to push the entire weld
@Travis Thacker I'd say he's a great welder and he knows what he's talking about, but his use of "drag" when he was pushing was kinda funny to me.
@Travis Thacker you sure i only used 225 ipm .045 3/8 2g cap
With SLAG Ya DRAG
Exactly
@@stockholmcindy6793 : Also kinda funny that he kept saying to be careful with wind when using flux core. Didn’t quite understand the philosophy behind that?
This was a great video. Super excited to be welding and this was so helpful
i appreciate u man your vids have gotten me thru welding school i graduate march 24, 2021
Wish I had you for an instructor.. Went to Tulsa welding school and that place is straight cookie cutter. Had a quick demo and the instructors would go wonder while you had no idea what you were doing. I've watched a ton of your videos and think "why was I told I HAD to do it that way" when I see you do something that would be more comfortable for me, and still be right. It's been a few years since I got out of the school but it put a bad taste in my mouth about the industry and didn't have the drive to become a welder after. Anyways, watching you teach is making me want to go practice again and get into again for some side projects.
Thanks im looking for work right now and most of the work is mig and flux core i live in katy so i hope they call been applying but it helps a lot just watching over and over again thank you
Good tutorial with detailed information. Thanks
Burn, learn, and earn I like that. Nice video thanks for taking the time to explain what your doing as you're doing it.
It's important to remember to let the plates air-cool in between passes. You don't want to keep putting heat in continuously and you absolutely don't water-cool it. A good temp gun is great for an AWS test
S
Spartan Crimson - how long do you let it cool between each pass?
Golz 150• is fine or you can also touch it real quick to see if it cooled down
use your finger nail
@@golz9785 1 cigarette
This guy is awesome honesty, from one welder to another man great tutorial 🤘
Nice work. I wish you success in their work 👍🏻
Good welding boy tanks for sharing and still up loading more videos I'm an older welder but we can still learning from each other god bless you
Good to see us yungstas puttin it down, I'm 13yrs n da game, mad skills young man!💯👨🏾🏭🔥
This video is going to help me so much thank you
felicidades eres un gran soldador y maestro me sorprende tu capacidad de conocimiento por ser muy joven gracias por compartir tus conocimientos un saludo desde monterrey nl mexico
Young man I have watched Your Vids keep up good vids
Love your videos
Sou soldador desde os 15anos,hoje tenho 59,e contínuo soldador de alumínio, barramento rígido de substaçao.gosto do teu programa.nota 10.
Wow thanks man I'm going for a job test on Monday for the job i found newly, and this was exactly the test i was told I'm going to meet there , and now i have learnt a lot on this VIDEO i pray 👏 that i pass the test and get the JOB BIG THANKS MAN 👍👍
SILLOKOBOY ENTER COMEDY did you get it bro
Clean each bead before running the next bead, NEVER run a fluxcore bead over a previous one if you haven't first knocked off the we flux.
Great video and of course u got the grinder guys in the back lol i miss school thank you for teaching
You do make that look easy
I've never tried flux core with my everlast welder. Great welding shots.
✌️💯 Brotha,I needed this extra edge of knowledge becuz I’m a beginner and I struggled with the vertical corner,etc just last week. I see now that my wire speed and Amperage was wrong!! Preciate chu!! 🤜🏼🤛🏿 I’ll do better futurely!! 🙏🏿☝️✌️
Great job 💪💪💪
Thanks for your video very nice and helpful. You're great at all your vidoes. Great info.
Your clearly a smart and great welder! I enjoyed this video but I was so excited for the end so I could read all the comments of people acting like TH-cam welding inspectors. I’ve been an ironworker for years now and I mostly stick but would like to be good at flux core as well. I enjoyed this video thank!
Go take a class at a tech school.
Took my test today and passed it easy money, started as welder and doing pipe once a week ojt not bad for 19hr.
Love your videos 🤗👍💗
Just found your videos ..glad I did bro
Ok!
Brother!
Valeu irmão, valeu a dica na 3G FCAW!
👏👏👏
😂😂🥇
Hey thanks man this is great information
Always doing good brotha
background noise seems fitting. 10/10 vid 🔥
I have been welding with flux core for 2 years and yes the wind will mess up your weld everytime. Good video my weld brother
james baker weld into the wind
If its gas shielded yes
Nice, gonna take my 3G test tonight. This video helps so much. Wish me luck! Thanks 😊
Where are you these days best welder ive watched on weldtube
Just took this test for certification last week, it was quarter inch though. Keep posting videos. Really helpful seeing different perspectives different styles.
Joshua Frazier the test plate or backing bar?
Very helpful brotha got my first FCAW test next week, let’s roll🤞🏽✊🏽
I been welding 15 year the kids is good and I love the video
Never welded a day in my life, but this is some interesting stuff.
Not a bad job on this video. The weld worked too. Nice job.
Nice man. I am currently out of school right now. Personal stuff I had to deal with. But this motivates me to get back into it which I will. Love the videos!
Did you ever go back? My friend had personal issues too. He's in prison. lol
Dual shield looks so nice
These videos seriously make me want to travel the 2 1/2, 3 hours every day to take your classes in Houston/Pasadena. Awesome content!
I have a great welding instructor at Aiken Tech. He knows his shit.
Ok, and????
I did not know a small amount of wind could affect flux core welding I learned something new today that's pretty much all I weld with is flux core
Crazy, I always did cursive e’s but this is way easier thanks!
Keep it up bro!!👍
Another great video my friend!
can you please teach me how to weld between the root gap.. so that i can get a nice penetration at back part of the plate?
Boa tarde como posso comprar essa mascara de solda que ele esta usando o senhor pode me enformar obrigado
Eu ainda não vi a venda essa máscara de solda em nenhum lugar Paulo!
Thanks man great stuff !!!
Thank you for your help! 👍
I'm a TIG welder for SS and exotics but now everybody wants to mig weld. I am looking for a new job and have an interview and weld test tomorrow. I wanted to brush up on numbers and movements and I'm sure I'll do well now! Thanks bro!
I been mig welding small parts for years now. Got a test in an hour for flux core structural. Havent done it in 15 years. Hoping this helps me refresh. Best of luck to you
I took my welding test and I have to say, it looked like a machine did it! I was really good back in the day when I did it a lot but its been a while! When it came to the money part, they said my welds were cold! They weren't. Its just your basic tactic to pay less money! I use to do the same thing when I want a boilermaker company. I'm not going to take the job because the pay wasn't right and they don't have insurance! I was amazed at how good my welding looked and ran though! I know on my next test, if I have to mig, I'll be just fine!
Hope you learned a valuable lesson to never take a test without knowing the pay and benefit situation beforehand. Your time is as valuable as theirs.
Thanks; looks nice. Looked like a push more than drag. Hope to D1.1 soon.
That's not dragging. That's pushing
Vertical fcaw it don't matter yes if it's slag you drag generally
You gotta have a push angle uphill or the puddle will fall out on you esp with dual shield FCAW
That's definitely not dragging. They always say "if there's slag, you drag" but I've discovered that holding it at a strait on 90° perpendicular angle works best for me on Dual Shield Flux, regardless of what position I'm in...
my boy was sweating after that ive learned alot im certified for 1G MIG GMAW under AWS hopefully i can take it further once i set up my station in my basement
Looked good. What gas mix was you running ?
Gracias por los consejos , y DIOS TE BENDIGA ,me fueron de gran ayuda 👍🙏🙏🙏
great jobs bro I wish you good future
Good work
Can you please do a video on mig spray transfer and go in to detail, eg. Gas mixture and wire size and so on, but none the less good video
Beautiful root pass
Good stuff as always! Need a 2"sch10 stainless steel backfeed root next vid!!
Folks, make note of the lack of arc movement. No weaving, oscillating, whipping or otherwise manipulating of the wrist. That looks like a very good weld, and probably is a very good weld. He has pretty good settings and lets the wire do the work. Good stuff. 350 imp and 28V would be a pretty good "maximum" for parameter settings. He was at 310, or something like that. Very good stuff!!
Thanks bro u helped me more than any one is there anyway you can do in wire welding video with the flux wire with no gasand how to make it stronger while be when you go over and over and help me which pattern you should go
you good teacher i leaning lot thanks
I wish you guys would do a cut and etch at the end of your videos! It would be nice to see the welds individual beads internally, and satisfying. Keep up the videos though!
Where did you buy that welding helmet? I've been welding for yrs and i still like to see videos like this because you can always learn something new. They say we die and never stop learning. Being comfortable when welding is the way to go. The videos are Super, and all newbies should take note.
Great Tip(Thanks👍)
You are very gooooood👍👍👍👍👍👍👍👍👍👍👍👍
I like your videos but curious if I was told wrong. Flux is for windy conditions?
Much respect. Thank ya sir.
Good job
looking at the puddle always the best
I used to use dual flux core and gas at one shop I worked. One day I had to weld a plate to a tube frame, I set up a guide bar, put down my shield and about 10 minutes and 7 or 8 feet later I put it back up. Looked like a machine did it. Make a weld kind of like a 7024 rod only it just keeps going.
Nice bro,thank you
good stuff my dood.
Sir nice welding bite & projection
Awesome bro! Thx