Sir, if any process is achieved with the value of Cpk 1.33 then it can shift 1.5sigma therefore PPM 6210 or if not shift then PPM 2700. So what should be the PMM target of this type of process ? Or can we fix the target 650 PPM, is this right or not? Si please explain ?
Motorola company research on six Sigma and found that if our process work long time on six Sigma,then process can shift up to 1.5 either in left or in right.so we are considering 1.5 shifting.
Because of min value is critical value. For example, suppose you are going by car in narrow road (street) have both side wall. One side less gap between wall and car and one side more gap between car and wall. Less gap side chance to hit the car to wall, so less value is more critical.
Cpk value depend on process variation and Cp value. Yes, It is possible Cpk value 4 if cp value is more than 4 and tolerance value given more. Please watch my video Cp & Cpk how to calculate ?
@@QualityPerfectIndia thank u sir for your reply, but sir as we know sigma level of a process is 3 times to the cpk value of process. And if our process run on cpk value 4 then it's mean process run on 12 sigma level. Is it possible??
It is not possible. For example - If one part A divided by two parts B & C, how it's possible that B or C will be greater than A. This example is only for your understanding. Regards
Thank you so much for asking 😊 good question. If in process rej.31.74% then process is working in two Sigma. If process rej. 4.56% then process working under 4 Sigma and if process rej is 0.27%, process is under 6sigma. For more detail please watch my video link given below: What is six Sigma: proth-cam.com/video/_kyMqhtqUnY/w-d-xo.html
![The Wall Song ร้องข้ามกำแพง | EP.215 | พาเวล นเรศ - พูห์ กฤติน | 17 ต.ค. 67 [1/5]](http://i.ytimg.com/vi/IUzrjuf60P4/mqdefault.jpg)
Sir बहुत ही अछि वीडियो है perfectly Clear by you Sir
Thank you so much for liking my videos.
Please watch others video also.
Very good sir thank you.
Thank you so much for liking my video.
Best video cpk value for knowledge like you quality perfect inda ❤️❤️❤️❤️👍👍👍👍
I like very most this vdo.
Thank you so much for liking this video.
Bahut pasand Aaya sir..thanks alot
Thanks
Good presentation
Jtekt india ltd Dharuhera
Thank you so much for your appreciation.
Please suggest if any.
Thanks for uploading
Thank you so much 🙏 for appreciating me.
Thanks
Bahut achha video sir
Thanks
It's a valuable knowledge for us.
Thank you so much.
Please suggest if any
Bahut khub ...🙏
Thanks
Nice explain sir ji abhi app jns mai hi hai
Thank u so much for liking this video. Yes mai abhi JNS me hu.
Aap mujhe kaise jaante hai?
Thank you sir
Thank you so much for appreciating me.
Super explanation
Thank you so much for liking my video.
Please watch my other videos also.
Thanks
Sir ji kar dia subscribe.
Aap ko bahut bahut dhanyavad.
please watch my other videos and get knowledge.
Very nice sir ji,, sir mera ek questions h . CNC,VMC machine mein hume machine ki capabilities kaise pata chalega
I will try to make video on this topic
@@QualityPerfectIndia have same question. Please make a video on this topic
Process ki capability hoti hai... Machine ki nahi
Superb video
Make videos on audit more and more.
Sure 👍
Thank you so much
Thank you
Thank you so much for liking this video.
Nice sir
Thanks for liking
Sir, if any process is achieved with the value of Cpk 1.33 then it can shift 1.5sigma therefore PPM 6210 or if not shift then PPM 2700.
So what should be the PMM target of this type of process ?
Or can we fix the target 650 PPM, is this right or not?
Si please explain ?
I request you please watch my other videos 🙏
1. What is six Sigma
2. What is SPC
3. Cp and Cpk (how to calculate)
Awesome 🤩
Thank you so much for liking my video.
Please watch my other videos also for your more information.
Nicely explained Sir,
How to calculate sigma of a machine?
Thank you so much.
Please watch our other videos also and suggest.
@@QualityPerfectIndia
Sure
Sir, if the process shifts then what is the value of Vpk
Please watch my other videos 🙏
1. What is six Sigma
2. What is SPC
3. Cp and Cpk (how to calculate)
Sir me like and subscribe bhi kiya hu
Yes I know.
Thank you so much for subscribing.
Aap ko bahut bahut dhanyawad.
Sir why we consider 1.5 shifting
Motorola company research on six Sigma and found that if our process work long time on six Sigma,then process can shift up to 1.5 either in left or in right.so we are considering 1.5 shifting.
Nice information
Thank you so much
Too Good. 👏
Thanks a lot 😊
Sir kya cpk ka value 2 < ho skta h
Yes. Ho sakta hai.
Cpk value jyada hai to process achha hai
Kya cp and cpk ka value 4.5 se jayada ho sakata hai
Yes
Ho sakta hai
Sir why cpk value always consider Min Value and why not accepted max value plz reply
Because of min value is critical value. For example, suppose you are going by car in narrow road (street) have both side wall. One side less gap between wall and car and one side more gap between car and wall. Less gap side chance to hit the car to wall, so less value is more critical.
My Cpk value if 6.........does it means my sigma level is 18?.... And dear sir Cpk value 6 is acceptable or not? Please reply
Best video
Thank you so much. Please watch other videos also suggest.
Sir, what is possible minimum & maximum Cpk value for a process??
Is it possible that for a process cpk value is 4??
Cpk value depend on process variation and Cp value.
Yes, It is possible Cpk value 4 if cp value is more than 4 and tolerance value given more. Please watch my video Cp & Cpk how to calculate ?
@@QualityPerfectIndia thank u sir for your reply, but sir as we know sigma level of a process is 3 times to the cpk value of process. And if our process run on cpk value 4 then it's mean process run on 12 sigma level. Is it possible??
Sir cpk value is always less than cp ?? What happens if vakue of cpk will greater than cp ??
It is not possible.
For example -
If one part A divided by two parts B & C, how it's possible that B or C will be greater than A. This example is only for your understanding.
Regards
@@QualityPerfectIndia Thanku so much sir 😊
Nice 🙂👍
Thank you so much.
Good
Dear sir, I am surjeet from Faridabad we SPC related questions with answers provided me for interview
All the best
How can I help you
Q c section related or chahiy
How to calculate sigma value??
what is 3sigma or4 sigma or 6 sigma really???
Thank you so much for asking 😊 good question.
If in process rej.31.74% then process is working in two Sigma.
If process rej. 4.56% then process working under 4 Sigma and if process rej is 0.27%, process is under 6sigma. For more detail please watch my video link given below:
What is six Sigma: proth-cam.com/video/_kyMqhtqUnY/w-d-xo.html
Digit clear nhi hai sir
Okay.
Next time I will take care.
Vedio clear nahi hai
Please bataye content sahi nahi hai ya teachings sahi nahi hai?
Sir 6 Sigma Green belt karna chahta hu me abna number send kar dijiye
Dear Rahul ji
I have sent details in your email.
Please check.
Regards
Jagdish Prasad
Quality Perfect India