Mike F is such a good dude. Feels like there's no obligation to do this type of stuff for the guys but he does and stays late doing it. What a freaking guy.
Pretty sure “Steve” would have taught the Pro Slat guy a thing or two if he had the lead on the cabinet install. I learn something every time I watch a Mike & Mike video.
@Mike F: The Italians do an iced latte a bit better by doing one shot of espresso frozen then pour another hot shot of espresso into the frozen to re-liquify it, shake it up really well and then pour it into a glass with some milk and ice. It's SUPERB! The mixture of the cold and hot espresso just does something magical. I think you will adore it.
For some reason, I want to see a dual setup with the pumps facing each other on a longer shelf. With the discharge hose dropping through the shelf and into the reel below. Other than the power switch being on opposite sides...
Mike's tip to assemble the Prevost piping 90 first before going through the exterior wall (to get the Prevost pipe lined up tight with the wall) was magical. Hit me in the OCD feels.
Mike I love the Red Pipe Wrench that you are using towards the end of the video. I am an Aussie in Australia and have one the same that was my late fathers. He called it a Stillson not sure if that was a brand of Wrench over here.
I’m about to tackle this project this weekend, only with a single 1322 setup. I’m mounting into cinder block as well and was wondering what size and type on concrete anchors you went with to mount the shelves and reel?
Hello obsessed garage… irrelevant but thought Mike ought to know: Your tattoo artist inked “I Love Us” in Arabian calligraphy on your right hand..(I don’t think it’s what you were looking for lol).. From DUBAI with ❤
Dumb question, why not just valve and 90 it strait in from the hose? Is there electrical in the wall behind the hose bib? Seemed like you ran 20 ft of piping to go 2 ft..
We ran it that way because we are adding the OG DI system to this setup and wanted the inlet of the water to come in on the left side of the DI tank. The DI cabinet is going to sit right there next to that locker where the 90 comes through the block.
I'm going to be "that guy" and say I think thats a MALE PVC adapter going into the Prevost ell and not a FEMALE adapter. Apologies Mike F. if I am seeing that incorrectly. Another great, well-thought out install!
It doubles the gpm which translates to better foaming, better and faster rinsing. The overall user experience is even better. It's not necessary but really nice.
New Steve video just dropped and the OnlyFans ass avatars are already spamming. Is OG still planning on offering 'test' units of the DI system showcased in the previous video(s)?
Mike F is such a good dude. Feels like there's no obligation to do this type of stuff for the guys but he does and stays late doing it. What a freaking guy.
Mike F is the dad I always wanted!
Mike F the Swiss army knife of dads
I would 100% hold the light wrong for Mike and learn so much 😂
@@WexWerxScott 😂😂😂
The Mike & Mike show never gets old. You always pick up handy tips as well. Great work, team. 👌
Mike just out there hooking everyone up! I hope he gets his outdoor kitchen soon to pay him back for all the awesome work he does!
He gets a check every two weeks to pay him back for all his hard work! We will see his kitchen in time.
Gotta love Mike & Mike videos! Congrats on the grandchild, Mike!
Thank you
I had a dad like Mike. I was so lucky.
Consistently best content on the channel. It’s also super satisfying just to watch it come together between mikes quality work and mikes editing
Not just satisfying, but super satisfying.
Mike and Mike, It doesn't get any better. There are a ton of choices on TH-cam but Mike and Mike Never disappoints.
Mike, I really appreciate how you explain things. I worked for a plumber that didn't teach. I learned by watching.
Mike has returned, good times and cinnamon rolls.
Everyone needs a " Mike "
The amount of 'tips and tricks' I learn every time Mike is doing something is mind blowing. Thank you, as always. A true master
This is the stuff we love to see.
Always down for the Mike and Mike Show!
I’m always impressed with the work you guys do! Huge appreciation for the skill, art, and patience in achieving the results
You all are good people, just havin a good time
I love all the handy tips. This is the content we don’t deserve! wholesome af
Pretty sure “Steve” would have taught the Pro Slat guy a thing or two if he had the lead on the cabinet install. I learn something every time I watch a Mike & Mike video.
I'm liking the black pressure washer shelves. would like to see them available.
Great video. I just watch in “awe” at both Mike’s skills. Having more skill with video, I’d like a Mike W series too 📷💻🎞️👍🏻
@Mike F: The Italians do an iced latte a bit better by doing one shot of espresso frozen then pour another hot shot of espresso into the frozen to re-liquify it, shake it up really well and then pour it into a glass with some milk and ice. It's SUPERB! The mixture of the cold and hot espresso just does something magical. I think you will adore it.
For some reason, I want to see a dual setup with the pumps facing each other on a longer shelf. With the discharge hose dropping through the shelf and into the reel below. Other than the power switch being on opposite sides...
Mike's tip to assemble the Prevost piping 90 first before going through the exterior wall (to get the Prevost pipe lined up tight with the wall) was magical. Hit me in the OCD feels.
Love seeing you guys doing an install.
Love seeing garage installs.
Always a pleasure to watch a master at work 👍🏽
*Steve Installs Mike's Dual Kranzle Pressure Washer Setup!
Congrats on being Grandpa now Mike 👏🏻
Thank you
Mike F is more deserving for this setup. When is his appreciation series coming out?
He’s getting a full outdoor kitchen soon
Mike I love the Red Pipe Wrench that you are using towards the end of the video. I am an Aussie in Australia and have one the same that was my late fathers. He called it a Stillson not sure if that was a brand of Wrench over here.
This was my dad's pipe wrench as well. It's a Craftsman but I'm pretty sure it's made by Rigid
Is a mini split install next for Mike’s garage? Would love to see the steps Steve takes to install one
Good job Mike
🔥 One of the best shops out there!!!! 🔥
Good job Steve!
Nice install Mike, a hitch vise on the pickup truck might be handy.
I just saw mikes shirt and was like man that shirt looks familiar.. then i look down and i was oh... Cause im wearing the same one 😂
Awesome Possum.
Great video
Did you use a 1 3/4 tapcon on the shelf? Just used different size washers?
What 18:09 model M18 Milwaukee Sds are you using during the install?
It's the Milwaukee 2912-22
I’m about to tackle this project this weekend, only with a single 1322 setup. I’m mounting into cinder block as well and was wondering what size and type on concrete anchors you went with to mount the shelves and reel?
5/16" Tapcons
We are all here for the dog.
25:32 how is Mike bending his hand like that?!
Would love to see a full swagelok install for the full pro look instead of hose.
I have everything to do mine so you might see it
@@MikeFigueira-OG that will be awesome. Love your work
Hello obsessed garage… irrelevant but thought Mike ought to know:
Your tattoo artist inked “I Love Us” in Arabian calligraphy on your right hand..(I don’t think it’s what you were looking for lol)..
From DUBAI with ❤
Haha - good catch. It is indeed intentional, the wife and I have the same matching tattoo.
@@MichaelWahba-OG haha … I follow you brother…
Love and respect from the other side of this rock..
From DUBAI with ♥️
What color black paint did you use on the ceiling?
Sherwin Williams Tricorn Black
You need twice as much espresso in that cup
Dumb question, why not just valve and 90 it strait in from the hose? Is there electrical in the wall behind the hose bib? Seemed like you ran 20 ft of piping to go 2 ft..
We ran it that way because we are adding the OG DI system to this setup and wanted the inlet of the water to come in on the left side of the DI tank. The DI cabinet is going to sit right there next to that locker where the 90 comes through the block.
@@ObsessedGarage Ahh makes perfect sense.
Mike, sick people use straws. ;-)
Mike, when possible use a stool instead of squaiting. You knees and back will thank you for it when you reach my age (72)
Steve didn’t make an appearance?
I fired Steve haha
I'm going to be "that guy" and say I think thats a MALE PVC adapter going into the Prevost ell and not a FEMALE adapter. Apologies Mike F. if I am seeing that incorrectly. Another great, well-thought out install!
It's female pvc (slip by fpt)
@@MikeFigueira-OG ahhhh...the Teflon tape on the street 90 threw me off.
Not quite sureI get the concept of the double Kranzle set up.......
It doubles the gpm which translates to better foaming, better and faster rinsing. The overall user experience is even better. It's not necessary but really nice.
👍
New Steve video just dropped and the OnlyFans ass avatars are already spamming. Is OG still planning on offering 'test' units of the DI system showcased in the previous video(s)?