Urethane (PU) Bumper Weight Plates Manufacturing Process from China Factory - MANTA

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ม.ค. 2025

ความคิดเห็น • 194

  • @oranguman8606
    @oranguman8606 4 ปีที่แล้ว +608

    Fun fact, this is the only person who makes bumper plates and that's why they're so expensive

    • @alphasaiyan5760
      @alphasaiyan5760 4 ปีที่แล้ว +16

      I was gonna say and that’s why they cost so damn much lol

    • @peterlustig9751
      @peterlustig9751 4 ปีที่แล้ว +10

      Sometimes there where two persons!

    • @aWatchmanOnTheWall
      @aWatchmanOnTheWall 4 ปีที่แล้ว +2

      Lmao

    • @georgeemil3618
      @georgeemil3618 4 ปีที่แล้ว +9

      Only a matter of time some hot-shot manager is going to look for ways to cut costs, look for efficiencies and and perform a time-study of the entire process.

    • @grzesiek1x
      @grzesiek1x 4 ปีที่แล้ว +12

      they probably buy them for a few dollars there and sell it for 10 times more

  • @chrisrogers8760
    @chrisrogers8760 4 ปีที่แล้ว +44

    Now i know why i have been waiting 5 months for a set

  • @landocal0
    @landocal0 4 ปีที่แล้ว +255

    The cost of a 45 lb plate is insane right now.

    • @lonewolf604
      @lonewolf604 4 ปีที่แล้ว +55

      I personally want to strangle all the facebook/craigslist sellers right now

    • @calebpardy3160
      @calebpardy3160 4 ปีที่แล้ว +14

      A good alternative is old truck brakes, if you know anyone who works in a shope they might have some and they can get up to 30lbs

    • @WuhTF
      @WuhTF 4 ปีที่แล้ว +8

      @@lonewolf604 me too, them fucker buying ti all up and reselling them for double the pricing. I'm still on wait-list looking for plates 🤦

    • @amar9614
      @amar9614 4 ปีที่แล้ว +9

      Concrete weight plates are pretty cheap and strong enough (except when you drop them from OHP height)

    • @Niko..
      @Niko.. 4 ปีที่แล้ว +6

      you can't afford my finest plates traveler

  • @shawmutt
    @shawmutt 4 ปีที่แล้ว +173

    Man that is a tremendously manual process, I'm surprised they aren't more expensive. Oh, right, Chinese labor. When do you add the Rogue/Titan/Rep/Ivanko/American Barbell name?

    • @Febreze99
      @Febreze99 4 ปีที่แล้ว +5

      I think Rogue is in house manufacturing

    • @TheLondonCyclist
      @TheLondonCyclist 4 ปีที่แล้ว +38

      @@Febreze99 Yeah, right lol

    • @repps1464
      @repps1464 4 ปีที่แล้ว +17

      @@Febreze99 they only make barbells in the US. Everything else, China

    • @Netrool
      @Netrool 3 ปีที่แล้ว +4

      @@Febreze99 nah, i bet the same guy in this video are making one for Rogues

    • @lastfirst2241
      @lastfirst2241 3 ปีที่แล้ว +4

      @@Febreze99 Rogue bumpers are made overseas. I think the only plates they have made in the US are the newer deep dish plates.

  • @rxonmymind8362
    @rxonmymind8362 3 ปีที่แล้ว +10

    Much respect for the hours of labor involved. Pay the man.
    I just wish this was done in the USA.

  • @TheGomezIndustries
    @TheGomezIndustries 4 ปีที่แล้ว +79

    Doing this all your life will give you forearms like steel.

    • @goldman7267
      @goldman7267 3 ปีที่แล้ว +25

      And lungs like plastic

    • @MaxMakerChannel
      @MaxMakerChannel 3 ปีที่แล้ว +5

      And cancer from the mould release spray.

    • @melin1969
      @melin1969 3 ปีที่แล้ว

      it took both of them to pick it up so clearly hes either new to the job or your wrong )

    • @TheScytheMoron
      @TheScytheMoron 3 ปีที่แล้ว

      @@MaxMakerChannel Would not be so sure. Probably just some silicone spray. But yeah NONE would be better than some in your lungs.

    • @pilapila183
      @pilapila183 ปีที่แล้ว

      @@melin1969sure you can pick up the plate easily by yourself a few times. Try doing that over an 8 hour shift and see how far you get

  • @marvineliahoppe7405
    @marvineliahoppe7405 3 ปีที่แล้ว +2

    Great Handwork!

  • @shailahashem6545
    @shailahashem6545 3 ปีที่แล้ว +1

    The color is bomb

  • @shimronnetia
    @shimronnetia 4 ปีที่แล้ว +3

    this is fine work

  • @StephenMattison66
    @StephenMattison66 3 ปีที่แล้ว

    Beautiful job!

  • @anshulsingh1008
    @anshulsingh1008 4 ปีที่แล้ว +2

    nice work 👍🤟🤘

  • @JohannesTraining
    @JohannesTraining 4 ปีที่แล้ว +9

    nice, what brands do you produce for ?

  • @RandomLifeBOXING
    @RandomLifeBOXING 3 ปีที่แล้ว

    Damn broh... Great content

  • @tobybowser7027
    @tobybowser7027 4 ปีที่แล้ว

    Nice work

  • @jajael7853
    @jajael7853 3 ปีที่แล้ว +3

    Great tip about what not to purchase, thanks!

    • @ozmobozo
      @ozmobozo 3 ปีที่แล้ว

      Iron plates are all you need really. They're cheap and basically indestructible. If you need to prevent fall damage to the floor then there's bumper plates.

  • @SuperMcZombie
    @SuperMcZombie 4 ปีที่แล้ว +32

    and then they do that 100,000 times

  • @bobkin611
    @bobkin611 3 ปีที่แล้ว +6

    Dude to be fair, that looks pretty damn good. And the weights that China is producing are pretty damn high quality these days. But, still. If I am paying $3/lb I want my shit made in the USA.

    • @hamedhaidari8658
      @hamedhaidari8658 3 ปีที่แล้ว

      Find scrap metals with high density (steel preferably), cast them and make your own plates, I was going to make plates with aluminum but its not worth tbh, the sad part is aluminum is light but the good part is it's low melting point 660C and much easier to melt even with average camping fire, while steel is 1500C and requires a proper furnace. that other guy mentioned make plates with concrete, unfortunately it will make a mess and high chance it'll break apart. a good source of metal would be car rims, a lot of people want to get rid of their old rims, so if you can find any, cut it into smaller pieces and cast your own plates ez. average rim weight is +10kg which makes it a sick source of metal to create plates. if you ever made weight plates out of scrap metal by yourself, feel free to share your experience (tips&tricks, things to avoid and exct..)

    • @miracleman8022
      @miracleman8022 3 ปีที่แล้ว

      Well then maybe you should open a factory and recruit college kids to do this

    • @meruem6995ujjoooo
      @meruem6995ujjoooo 2 ปีที่แล้ว

      I belive then they would have no incentive to producer.

  • @hulkaplasta6558
    @hulkaplasta6558 4 ปีที่แล้ว +1

    Cuanta belleza 😍

  • @OlMoldy
    @OlMoldy 3 ปีที่แล้ว

    livin the dream

  • @hmassivemandible880
    @hmassivemandible880 4 ปีที่แล้ว +3

    Quarantine is rubbing it down

  • @justicaterra8227
    @justicaterra8227 3 ปีที่แล้ว +1

    Qual é o investimento numa máquina dessa ?🤩🇧🇷🏋️‍♂️💰💲💰🤸‍♂️🤸‍♀️🙏

  • @DanielSantos-jm7to
    @DanielSantos-jm7to 4 ปีที่แล้ว +4

    You could live here in Brazil, here many people buy to set up their own gym at home. Is it possible to deliver to other countries?

    • @chinamantafitness5636
      @chinamantafitness5636  4 ปีที่แล้ว +3

      Yes we can ship to Brazil, please send mail to sales@mtrolls.com if you want to distribute our products locally.

    • @thiago_mariani
      @thiago_mariani 4 ปีที่แล้ว

      Daniel você chegou a comprar? Também sou do Brasil.

    • @guihsw7133
      @guihsw7133 4 ปีที่แล้ว

      Também tenho interesse

  • @TheBritishEntrepreneur
    @TheBritishEntrepreneur 4 ปีที่แล้ว +1

    what is the name of the machine? I'm looking to buy one.

  • @shobhithkumar2533
    @shobhithkumar2533 4 ปีที่แล้ว

    Wow lovely

  • @niketpatil8220
    @niketpatil8220 3 ปีที่แล้ว +3

    Ppl are taking about that labour hardwork that's cute .

  • @playnow3648
    @playnow3648 3 ปีที่แล้ว

    I would like to know the name of that yellow liquid please? looks like paint

  • @anil.sabri1048
    @anil.sabri1048 3 ปีที่แล้ว

    What is the yellow liquid spilled?

  • @tedsmith6137
    @tedsmith6137 3 ปีที่แล้ว

    Wonderful. WTF were they making?

  • @bendarliguh7262
    @bendarliguh7262 4 ปีที่แล้ว +3

    What material color yellow in video ???

  • @spartancrosstrainingurbanf8193
    @spartancrosstrainingurbanf8193 4 ปีที่แล้ว +3

    Que costo tienen? Para la ciudad de México

  • @madanmohan1354
    @madanmohan1354 4 ปีที่แล้ว

    Super bro

  • @jhalona8967
    @jhalona8967 4 ปีที่แล้ว +1

    Seeing this on my recommendation page while my state is in lockdown.. AGAIN! sucks💀👎🏾 should’ve bought bumper plates when I had the chance smfh

  • @feliperodriguezbertoli8062
    @feliperodriguezbertoli8062 4 ปีที่แล้ว +1

    Que hermoso mi sueño es tener uno de esos

  • @Vishalavia
    @Vishalavia ปีที่แล้ว

    I want to start who will provide know how

  • @pedalera2
    @pedalera2 ปีที่แล้ว

    Wow

  • @ferunando_jp
    @ferunando_jp 3 ปีที่แล้ว

    Amazing🤭🤭🤭🤭

  • @ibrahimhima3158
    @ibrahimhima3158 4 ปีที่แล้ว +1

    Thanks for the vedio , if you sell it , how can i contact you please ?

  • @ivantirado8233
    @ivantirado8233 4 ปีที่แล้ว +1

    Sent an email for an inquiry! Awesome video

    • @chinamantafitness5636
      @chinamantafitness5636  4 ปีที่แล้ว +1

      Thanks for your interest in Manta Fitness!

    • @doomdarkknight4138
      @doomdarkknight4138 4 ปีที่แล้ว

      Ivan Tirado are theses cheeper than normal prices

    • @ivantirado8233
      @ivantirado8233 4 ปีที่แล้ว +1

      [DOOM]DarkKnight I don’t know they haven’t responded via email

    • @apeelvis
      @apeelvis 4 ปีที่แล้ว +1

      @@ivantirado8233 Typically with these chinese manufacturers the cost of the plate is reasonable. The cost of shipping is insane.

  • @AUSSIEWOODSTOCK
    @AUSSIEWOODSTOCK 4 ปีที่แล้ว +2

    How much to make bumper plates in China And sell for a fortune?

    • @teslavoisier943
      @teslavoisier943 4 ปีที่แล้ว

      I looked up on taobao a Chinese shopping set and a single 20kg bumper plate costs RMB 220 in China. That’s about £25.

    • @teslavoisier943
      @teslavoisier943 4 ปีที่แล้ว

      Unfortunately our friend donkey trump will increase the tariff more so the price in the US should not go down in a short time

    • @matthewhodes1908
      @matthewhodes1908 4 ปีที่แล้ว +1

      @@teslavoisier943 the problem is shipping costs it's ridiculous

  • @michaelmedeiros4143
    @michaelmedeiros4143 2 ปีที่แล้ว

    I thought bumpers were solid rubber all throughout minus the center hub?

  • @tunedupwitmymusic
    @tunedupwitmymusic 4 ปีที่แล้ว +7

    Hi what is the
    Curing time
    Shore Hardness
    Elongation
    Viscosity of the pu rubber

    • @breakingtoast2255
      @breakingtoast2255 4 ปีที่แล้ว +5

      Yes

    • @sasproductions701
      @sasproductions701 3 ปีที่แล้ว

      i know this guy uses a consistent amount of mixture in a container, but has to keep tapping it to see if its fully dry and ready. that part bugged me.

  • @pitravrud1240
    @pitravrud1240 4 ปีที่แล้ว

    Y esos discos dónde se consiguen, costos..?

  • @mirsal_pp
    @mirsal_pp 4 ปีที่แล้ว

    steady

  • @MacStrengthCo
    @MacStrengthCo 3 ปีที่แล้ว +1

    The amount of labour involved is the reason they are so expensive!

  • @playnow3648
    @playnow3648 3 ปีที่แล้ว

    Quisiera saber el nombre de ese líquido amarillo, parece pintura?

  • @BP-xv7fj
    @BP-xv7fj 4 ปีที่แล้ว +4

    Damn it takes forever to make one plate

  • @achrafbeatboxfitness8573
    @achrafbeatboxfitness8573 4 ปีที่แล้ว +1

    كيفاش تحرق اادهون بلاما تطيح العضلات

  • @alexadrosk4361
    @alexadrosk4361 4 ปีที่แล้ว

    Do you have any European Wherhouse??

    • @baishya775
      @baishya775 4 ปีที่แล้ว +2

      Did you mean whorehouse? /s

  • @justicaterra8227
    @justicaterra8227 3 ปีที่แล้ว

    Me envia seu contato quero esse produto?🇧🇷

  • @giovanniampuero3582
    @giovanniampuero3582 4 ปีที่แล้ว

    I like plate

  • @inzimamulhaq4636
    @inzimamulhaq4636 4 ปีที่แล้ว

    I want to buy plates

  • @yashsoni2715
    @yashsoni2715 4 ปีที่แล้ว

    osm

  • @manishmahawar3366
    @manishmahawar3366 3 ปีที่แล้ว

    👌❤

  • @Uvenga
    @Uvenga 4 ปีที่แล้ว

    Keep posting please

  • @utenteregistrato8293
    @utenteregistrato8293 4 ปีที่แล้ว

    Price?

  • @duanefrissen603
    @duanefrissen603 4 ปีที่แล้ว +5

    He needs to start doing some overtime.

  • @gt-uy87gh3jq
    @gt-uy87gh3jq 4 ปีที่แล้ว

    돈이 없어서 못 샀는데.... 이유가 있었구나 ㅋㅋ

  • @mddinislammia3794
    @mddinislammia3794 4 ปีที่แล้ว

    Big bicep

  • @ultrakiz9779
    @ultrakiz9779 4 ปีที่แล้ว +7

    but where is weight and logo ?

  • @Скептик-ю5я
    @Скептик-ю5я 3 ปีที่แล้ว

    Вроде технология не сложная, а стоит космических денег.

  • @Niels_Dn
    @Niels_Dn 3 ปีที่แล้ว +1

    Damn that’s the most messy workshop I’ve ever seen

  • @chandfirozalam6356
    @chandfirozalam6356 4 ปีที่แล้ว

    Price

  • @nikolasbbq
    @nikolasbbq 3 ปีที่แล้ว +2

    This stuff is so high tech that there’s not a plant in America that can make this. Even plain metal dumbbells are so difficult to make that they have to come from China.

  • @wertiaaudit5746
    @wertiaaudit5746 3 ปีที่แล้ว

    👍

  • @alonzo5.040
    @alonzo5.040 3 ปีที่แล้ว

    Wow that’s like $10,000

  • @sx99cornell
    @sx99cornell 3 ปีที่แล้ว

    you sure it's not a kitchen?

  • @rebelmind654
    @rebelmind654 3 ปีที่แล้ว +3

    Didn't know bumper plates were made out of egg yolk!

    • @Aichiever23
      @Aichiever23 3 ปีที่แล้ว +1

      they actually do that for the extra protein.

  • @nikstep8956
    @nikstep8956 3 ปีที่แล้ว

    I would lift that plate.

  • @rollsroyce1279
    @rollsroyce1279 4 ปีที่แล้ว

    no gooooooood nooooooo gooooooooooood

  • @pedelpdbjyt
    @pedelpdbjyt 4 ปีที่แล้ว

    Nice process, but fake bumpers.
    They put iron inside instead of all rubber!

  • @428bsm
    @428bsm 3 ปีที่แล้ว

    No wonder they are always out of stock

  • @나그네-g1s
    @나그네-g1s 4 ปีที่แล้ว +1

    이정도면 거의 수제네..

  • @vdml
    @vdml 3 ปีที่แล้ว

    forbidden pancake

  • @hamedhaidari8658
    @hamedhaidari8658 3 ปีที่แล้ว

    Find scrap metals with high density (steel preferably), cast them and make your own plates, I was going to make plates with aluminum but its not worth tbh, the sad part is aluminum is light but the good part is it's low melting point 660C and much easier to melt even with average camping fire, while steel is 1500C and requires a proper furnace. that other guy mentioned make plates with concrete, unfortunately it will make a mess and high chance it'll break apart. a good source of metal would be car rims, a lot of people want to get rid of their old rims, so if you can find any, cut it into smaller pieces and cast your own plates ez. average rim weight is +10kg which makes it a sick source of metal to create plates. if you ever made weight plates out of scrap metal by yourself, feel free to share your experience (tips&tricks, things to avoid and exct..)

  • @VoloMara1960
    @VoloMara1960 9 หลายเดือนก่อน

    И здесь Китай!!😂

    • @mrbasfed1948
      @mrbasfed1948 9 หลายเดือนก่อน

      Сделай лучше и/или дешевле.

  • @timmiet47321
    @timmiet47321 3 ปีที่แล้ว +5

    That process looks so inefficient.

  • @jamesvitor6015
    @jamesvitor6015 4 ปีที่แล้ว +3

    This is a joke. Cant they make this process more cost/time efficient ?

  • @sign1in
    @sign1in 4 ปีที่แล้ว

    So that's why they cost a fortune.

  • @Nandu6321
    @Nandu6321 4 ปีที่แล้ว

    They don’t weigh similar if done such manually !

  • @curtisnewton895
    @curtisnewton895 3 ปีที่แล้ว

    wtf is a Bumper Weight Plate????

  • @chinamantafitness5636
    @chinamantafitness5636  4 ปีที่แล้ว +2

    Wholesale PU Bumper Plates made in China:
    (Custom LOGO is available)
    www.alohamuscle.com/urethane-bumper-plates/

  • @MrNeocrusher
    @MrNeocrusher 3 ปีที่แล้ว

    Looks like a big iron hamburger with melted cheddar

  • @Adi98665
    @Adi98665 7 หลายเดือนก่อน

    kota Jepara Guyangan randu beli 200 ratus ribu warna hijau bayar ke yang nganter paketnya gimana

  • @worldtour5648
    @worldtour5648 4 ปีที่แล้ว

    With free corona na ?

    • @TheGreatShawnY
      @TheGreatShawnY 4 ปีที่แล้ว +2

      Nah, corona is rare in China now, might have to import from the states to keep the cost low.

  • @renatozegpi7963
    @renatozegpi7963 4 ปีที่แล้ว +1

    I’m currently selling my kidney for a pair of those

  • @vir123456
    @vir123456 4 ปีที่แล้ว

    Why would I buy anything made in China when I can buy it from anywhere else in the world? Poor craftsmanship in this video.

    • @agent99._.53
      @agent99._.53 3 ปีที่แล้ว +2

      Because it’s cheap and good luck finding bumper plates made outside of China the job is hard and dirty would probably be illegal here

  • @justinfinn6850
    @justinfinn6850 4 ปีที่แล้ว

    So lifting weights is supposed to make you bigger and stronger... these guys make and lift these weights all day long for a work week. How are they not huge!!??

    • @SpartanThe300th
      @SpartanThe300th 4 ปีที่แล้ว +1

      Nutrition.
      You don't get bigger when you lift (that tears your muscles). You get bigger when you eat, rest & sleep.

    • @mr.x.workout1902
      @mr.x.workout1902 3 ปีที่แล้ว +1

      @@SpartanThe300th no even though you eat, rest right, if you don't progressiv overloead, you won't grow bigger and thses guys lifting the same wieght or intensity everyday, that's why they stuck !

    • @naptownfireman
      @naptownfireman 3 ปีที่แล้ว

      Need juice bro.

    • @Milliardo5
      @Milliardo5 2 ปีที่แล้ว +1

      Just because you lift things doesn't mean you'll have a good physique. As an example, compare a bodybuilder to a powerlifter. Also these guys here aren't lifting according to form or technique, which is essential to build muscles the right way. Everything has to go together: form, technique, nutrition, progressive overload, and for some even gear.

  • @TheContraryView
    @TheContraryView 3 ปีที่แล้ว

    Such primitive looking manufacturing. Why can't we automate this in the USA?

  • @grinflur
    @grinflur 3 ปีที่แล้ว

    Monkey business. Why not inject into mold?

  • @SML1010THAI
    @SML1010THAI 4 ปีที่แล้ว

    Don’t try this at home 🤣😂

  • @yaboykawz
    @yaboykawz 3 ปีที่แล้ว

    It's fake!

  • @CCxKiller13
    @CCxKiller13 3 ปีที่แล้ว

    Proudly made near Tiananmen Square in Peoples Republic of China by kids

  • @ibrahimhima3158
    @ibrahimhima3158 4 ปีที่แล้ว

    Thanks for the vedio , if you sell it , how can i contact you please ?

    • @chinamantafitness5636
      @chinamantafitness5636  4 ปีที่แล้ว +1

      hi Ibrahim, please contact Manta sales team by: sales@mtrolls.com, thanks for your interest in China Manta Fitness!