We should do some ebike stuff together!! we’re also in Michigan👀🤘🏼 Our stock Talaria mx4 Surron lbx & Kayo tt140 VS your 76v Kayo! the talaria will do 55mph so we know that 76v 48ah might whoop it😂 but would be cool to compare them all🤘🏼🤙🏼
Cut the front fender down so it doesn’t hit the frame and please put it on. It looks goonish. And pull the bars back some and it will be way more controllable.
You can tell from the onboard footage that it pulls hard. It looks so good doing so. The kid did a sick job on that bike. I just started building a KX 125 with an extended swing arm. I'm using a 96v system. I'm building it for the 2024 Big Hill Jam at MX Ranch. I wasn't to see how it would climb compared to gas bikes. I'm scared for my life. lol. All should put an extended swing arm on yours and come to Big Hill Jam do some hill climbing and enter the pitbike races. Big Hill Jam is so freaking fun. Y'all need to go!
Been watching for quite some time with these guys reflecting on their indoor kart racing video years ago ……… now this unit ……… get yourselves a half dozen electric conversion race karts and light up the compound grounds competition would be entertaining
So glad I found the channel, I enjoy every video. Definitely my favorite power sports/garage channel. Great group of chill guys. Definitely wanna get into this type of work after college!!
Boyz make a couple UTV that are electric. Then you can rip your track and not have the neighbors complain about you for the noise issue. Its sad you cant really enjoy all the hard work it was to make that track. Have a good week
Steve is magic. The bike is too short wheelbase, mono shock good, rake the forks maybe, and extend the rear, like the big boy size. Aka longlegers. Intaspower is cool if you can handle it. Maybe you all need 4legs Idk.
Yuns should do a full 8 part build on a banshee with a 421 serval and Mattoon billet cases and stock length swingarm! Pretty much a hellcatbansheechannel banshee with unbreakable cases
I would be dangerous with one of those batteries. When I quit building race scooters (standup) circa 2009 I was using 400 Amp controllers and 2 brushed motors. If you turned up the ramp up rate on the controller to 100%, the scooter would walk right out from under you. When tuned perfectly you could stand with both feet at the front of the deck and carry the front wheel to almost 40 MPH. Staying in it any longer would result in melting all 8 brush holders. I did build some electric brushless street scooters (think Vespa clone), but they were still using lead acid at 60 volts fully charged. The brushless controllers have come so far, I would love to build a standup scooter with this motor and battery setup.
I would upgrade the triple tree clamps forks and the swing arm and put some like 125 or 250 dirt bike wheels I guarantee you it would ride way more stable and you'll be able to get in the power way more
reminds me of my conversion...way too powerful. I converted a apollo 110 into a monster using the same motor you did..but with a 72v battery. my biggest regret was doing it to a complete pos pitter sized bike. I should have found a blown up full size bike to convert.
First Steve great job with the fab work!!!!! second im not really a electric bike guy but now you guys got wanting to see 🤣🤣 great job boys keep it up!!!!!!
That ev dirkt bike is SICK! Even tho i don't like EV cars,i'd actually prefer that over regular dirt bike only because i like to see wild life in Nature before it runs away from the regular dirt bike's loud noise!
Does the battery need rubber pads being in the metal bracket like that or would it benefit from it? I couldn't tell if they were in there when you assembled it
I can tell you one thing, sticking your leg out on a bike is a good way to wreck your knee or ankle or leg. Careful with that. And get some riding boots. I worked with a guy once who downed his bike when a dog ran out on him going 40. He got a Knee delete and a fake knee install. Super awesome build though, I like it a lott👍👌
Pitbike rider since 2006!!!😂😂😂 Got myself a new one last year, but I’m too old for them at this point. Feeling stupid when people see me on it. I’m 46😂😂😂😂😂
You should let the little guys rip it in a comparison. @yarboroughracing30. He is 8 and races a husqvarna 65. Love the channel. Keep up the videos, boys.
Talaria vs DIY electric bike: What kind of comparisons would you like to see?
No I like the mop top if anything he needs to make it a nappy mullet
We should do some ebike stuff together!! we’re also in Michigan👀🤘🏼
Our stock Talaria mx4 Surron lbx & Kayo tt140 VS your 76v Kayo! the talaria will do 55mph so we know that 76v 48ah might whoop it😂 but would be cool to compare them all🤘🏼🤙🏼
build it out like a Stark Varg, outrun and out jump any 250/450
Cut the front fender down so it doesn’t hit the frame and please put it on. It looks goonish. And pull the bars back some and it will be way more controllable.
@@Degenerate124The fender does fit perfect as is, we were debating whether it looked better with or without.
It was nice to see that track again. Great build guys
Wonder if the city gave them the ok?
@@chevyheavy79 I hope so
Can’t hear no E-bike😆
You guys are in full stride! Awesome camera work, awesome content, awesome editing!! Great job boys!
The gunmetal and bright green is SHARP! We need to see that on a sxs build!
You guys got the space, tools and expertise to start manufacturing and selling these!
This. And it'd be $2000 in giveaway entries.. lol
You can tell from the onboard footage that it pulls hard. It looks so good doing so. The kid did a sick job on that bike. I just started building a KX 125 with an extended swing arm. I'm using a 96v system. I'm building it for the 2024 Big Hill Jam at MX Ranch. I wasn't to see how it would climb compared to gas bikes. I'm scared for my life. lol. All should put an extended swing arm on yours and come to Big Hill Jam do some hill climbing and enter the pitbike races. Big Hill Jam is so freaking fun. Y'all need to go!
That powder coat came out bad ass completes the bike for sure
Been watching for quite some time with these guys reflecting on their indoor kart racing video
years ago ……… now this unit ……… get yourselves a half dozen electric conversion race karts and light up the compound grounds competition would be entertaining
So glad I found the channel, I enjoy every video. Definitely my favorite power sports/garage channel. Great group of chill guys. Definitely wanna get into this type of work after college!!
Great job Steve!!!! One of the nicest builds so far!!
4:18 nicely done! Looks really nice already at that point!
Nice build, Steve, very clean build!That bike is powerful!!
Steve, you mad scientist luv it! 😂
I love the paint choice on that "e-bike"!
Boyz make a couple UTV that are electric. Then you can rip your track and not have the neighbors complain about you for the noise issue. Its sad you cant really enjoy all the hard work it was to make that track. Have a good week
that color on the powder coat 😍😍
I have a sur ron and it's undescribable fun! Definitely phyced to see the next video.
I need one so bad love the garage videos an fab work, great job guys, can't wait to see more on the yxz
Outstanding build Steve 👌 beautiful job 👏
Thanks!
So stoked on this. I was just thinking the other day when this build was coming 😎👍
I'm in Michigan and ride/race dirt bikes. Can I come take this thing around the track to see what it can do??! 🙏
I think me and my brother had the first talaria stings in Michigan they are super fun to ride single trails.
Good job Steve that thing is put together well and looks great!
I've been waiting for this video to drop pushed on it right away
Sic build! Great job as usual gents. You guys have some raw talent!
Damn that turned out good. Great choice on color👌
I don't know why i've waited so long to watch this channel with you guys.
Steve is magic. The bike is too short wheelbase, mono shock good, rake the forks maybe, and extend the rear, like the big boy size. Aka longlegers. Intaspower is cool if you can handle it. Maybe you all need 4legs Idk.
That plasma cutter is working good! Sick!!
It's a game changer for fab work, makes life so much easier
Everyone loves a worlds fastest thing , WORLDS FASTEST SXS ELECTRIC!! DO IT, FREAKING DO IT
Steve really killed this build and all you guys are doing a great job on both channels. Keep it up!
I LOVE THE MOTORCYCLE CONTENT I HAVE A 125 AND I LOVE IT EVEN THO ITS BLOWN UP NOW AND I CANT AFFORD TO FIX IT 😩
Seeing the track makes me mad for you guys again. Such a good spot for sxs content.
Compare the electric dirt bike to a gas dirt bike of its same size so that way people would get a better understanding of how fast it really is
Yuns should do a full 8 part build on a banshee with a 421 serval and Mattoon billet cases and stock length swingarm! Pretty much a hellcatbansheechannel banshee with unbreakable cases
I would be dangerous with one of those batteries. When I quit building race scooters (standup) circa 2009 I was using 400 Amp controllers and 2 brushed motors. If you turned up the ramp up rate on the controller to 100%, the scooter would walk right out from under you. When tuned perfectly you could stand with both feet at the front of the deck and carry the front wheel to almost 40 MPH. Staying in it any longer would result in melting all 8 brush holders. I did build some electric brushless street scooters (think Vespa clone), but they were still using lead acid at 60 volts fully charged. The brushless controllers have come so far, I would love to build a standup scooter with this motor and battery setup.
You all should do this with a sport quad. Wanted to see this done for a long time and I’d absolutely love to ride one lol 😂
Gimme fun bike 🎉🎉🎉
This looks so good. Frame design takes mad skill
It would be sweet if u made like a 200x or something like that electric... awsome build good job...!!
Should find a full size dirt bike for the next one.
You guys should offer to build these for the public!
Nice to see electric stuff (finally) can't wait for a good sxs swap
It's awesome, probably a full 250 chassis be ideal
Cool build guys.
Man, that thing is a little ripper. And it looks better than most of the ebikes currently on the market 😄
I would upgrade the triple tree clamps forks and the swing arm and put some like 125 or 250 dirt bike wheels I guarantee you it would ride way more stable and you'll be able to get in the power way more
Shout out for the Breakover Angle reference
Great job. Looks very oem.
Id absolutely love to take that bike for a couple laps around that track!
Love the content guys killn it
home boy wit da mini bike got his brain on right. Thanks for trustin his vision ya feel
reminds me of my conversion...way too powerful. I converted a apollo 110 into a monster using the same motor you did..but with a 72v battery. my biggest regret was doing it to a complete pos pitter sized bike. I should have found a blown up full size bike to convert.
I'm looking to do the same. What did the setup cost you?
The bike turned out sweet! Can't wait to see that comparison! Maybe throw in a gas dirtbike into the mix for a comparison as well?
Awesome yall 👍💯😎
need to build that on a 250 or 450 chassis
YZ-EMX Kit! 🚀🚀🚀
First Steve great job with the fab work!!!!! second im not really a electric bike guy but now you guys got wanting to see 🤣🤣 great job boys keep it up!!!!!!
U need to put a second back break where the clutch lever used to be so u can do better controlled wheelies
Matt’s got a sting r. I just bought one. They’re awesome!
This bike would be a GREAT giveaway and a good excuse to hang with yall! 😮 just saying.....😊
Be cooler to manufacture and sell 110 of them.
This thing is going in my garage when no one is looking 🤣
Great build. Looks factory
Maybe keep an ol trusty gasoline bike for comparison/gas benchmark. Talk about the difference in power delivery.
Very cool machine indeed!
Hopefully we keep seeing more stuff from this channel from the new 3d printer and shit.. all the other hobby y’all got aside from sxs
Watching the final assembly made me feel like it was 20 years ago, watching American Chopper.
18:12 Get the Arc Droid and cut a Solid Rear Disc. Should tame the bite a smidge
Yeah Mike! Going for the wheelie!
I still love watching you guys. I live in Illinois and would love to come rip my Jeep on your track.
how can you hate these guys...... great vid
great job steve and matt
Whaaat a new giveaway🎉🎉
One less tooth on the rear sprocket and use map 2, should be the sweet spot
Love the bike guys
Yous are back on the track! So was it a noise ordinance thing? Wasn't too clear on the sit down vid.
Also hopefully another update on things soon???
I guessing they can drive stuff that don't make any noise lol
The city is really not making it clear to us either. We just figured it would be hard to get mad over a small silent pit bike
That ev dirkt bike is SICK!
Even tho i don't like EV cars,i'd actually prefer that over regular dirt bike only because i like to see wild life in Nature before it runs away from the regular dirt bike's loud noise!
Great video I would recommend standing up when ripping that thing trust me it might feel odd at first but all pro riders stand 90% of the time
Nice job 👍
awesome job
Please tell me those bkt’s I’m the background are for that arctic cat. V8 power nitrous fed bounty buggy!!!
super cool !!!!!!
Does the battery need rubber pads being in the metal bracket like that or would it benefit from it? I couldn't tell if they were in there when you assembled it
Yes we put in rubber isolators.
nice build can you talk about the theif soon
shorter rear gear + a little more throttle ramp = SEND IT!
Two words: *Master Piece*
I can tell you one thing, sticking your leg out on a bike is a good way to wreck your knee or ankle or leg. Careful with that. And get some riding boots. I worked with a guy once who downed his bike when a dog ran out on him going 40. He got a Knee delete and a fake knee install. Super awesome build though, I like it a lott👍👌
I like how Matt says they're giving away a "brand new" RZR. It's been raced, in the mud, in the water, jumped, etc.
Oh. Is the track back for testing things again. Right on
I put a blaster 200 in the same pit bike chassis Same but also polar opposites
Ya see... I would love to know what it would cost for this complete system to apply to say a coleman mini bike.. just wondering guys thanks
You guys could do a build up of another one with a 190cc 4 valve and compare them
Banger video
Badass bike!!
This thing is so sick!
Hey what’s up bros how y’all doing much love
I could not find the merch on your site. It was all sxs parts.
It goes live at 7pm EST tonight!
Are you guys able to use that track again ?????? Please tell us yes. Miss seeing you guys use it.
Does this mean the track is back? Or was it just because that was electric?
Pitbike rider since 2006!!!😂😂😂
Got myself a new one last year, but I’m too old for them at this point. Feeling stupid when people see me on it. I’m 46😂😂😂😂😂
Never too old to have fun!
Turbo S conversion next!
That little thing spicy. Af. You guys should really mass-produce in different sizes
You should let the little guys rip it in a comparison. @yarboroughracing30. He is 8 and races a husqvarna 65. Love the channel. Keep up the videos, boys.
You guys need to get someone that races dirtbikes on that thing