Warren lane one of the greatest mechanics i know stay safe take care keep up your great work thank you for the Videos 👍⚒🇺🇸🇱🇻 hard honest work for ever blue collor
Warren your worth more than a $100 an hour. You care more than most mechanics do. There are those that think the world owes them a favor, you can’t please them at all. I know your extremely busy! Thank you for sharing!
Hate people that complain about labor rates knowing it’s cheaper then a dealer. I have a friend that is very experienced in a certain type of plane that is known to be a handful on landings. A new owner asked him is per hour rate, he said $85. Guy said it too expensive. My buddy asked what his deductible was, guy said $1000. He then said he would train him for free but every time he had to save the plane the owner owed him $1000. The new owner took the hourly deal.
I always hated doing an in field repair that had anything to do with having to use grease. Never fails you get everything clean as best you can or you drop something and you get a gust of wind and dirt goes everywhere or you grab the wrong rag in your haste and wipe something with it. Can't imagine what the mechanics in the military went through making repairs in the desert. Man that spindle really had some wear. You're right about the 8000 series Deere tractors. I spent a lot of time in a 8400. I have said it before I don't know what you charge but your worth every damn penny......
I Know Warren You aren't That Man who lives to Wrong Someone so I will Say this to you in kindness; Those that have used you to benefit from an evil Deed will pay for their Evil in a mightier way than you can imagine! Don't Let their Evil turn you bitter to the point of hating them back, Forgive them and shake the dust off your feet Because you are way better than this. people ask me all the time why you let people take advantage of you soo much? And I Myself know the Answer to this question first hand and that is they mistake our Kindness for stupidity and once we realize their scheme we walk away and not allow them any more help! but it is hard when you have a servants heart which makes it difficult to see their schemes at first. as I have gotten older i am not so quick to jump on something that appears to be good anymore God Bless you Warren and Thank you for another lesson in repair.
Warren, new to your channel. As an auto mechanic and farmer, I love your videos. Keep up the good work. Been binge watching your older videos and look forward to new ones daily. Thanks
Interesting putting the new seals in. I bored out the cylinders, new pistons, the whole nine yards on my Ford 3000 and putting it all back together now. I am having a hard time putting the crankshaft rear main seal in so I just put it all on hold until I figured out what I was doing wrong. Greasing the outside diameter looks to be a mistake I made among others. Life is tough when you don’t know what your doing but I am learning.
I feel your pain in wind like that, doing any kind of spannering, your fighting the dust out of everywhere, including yourself. Takes it toll on everything as well, grease, oils, tools, clothing, it’s a fluid sandpaper, gets in and just abrades. Well if you ain’t worth $100 an hour, then you don’t need that business, let him find out the hard way. You seem a good man, hard working and honest for sure, worth more than that an hour just for those traits alone. Keep safe out there, working in all conditions, and getting it done.
It's almost impossible to keep the dirt out with the wind blowing it around. You do the best you can and keep your fingers crossed. People want top quality work at shade tree prices. Like you said just wait til he gets their bill. That's going to be funny when he gets crappy work and pays for parts that he didn't need. Good job as usual!!!
At 120 an hour and how hard you work I would say that's a bargain..I'd rather have you work on my stuff versus the dealer mech who dont know shit. Your a hard working SOB Warren you deserve much more..
the wind............its a struggle when the weather doesnt play along. As usual having a decent service truck, with a crane is super useful for a 1 man operation ))
Good Vidio Warren. Man. I wish you lived closer. I'd hire you to do my dads John Deer. Hubs are rattling like crazy. Your one of the best I've ever seen. I wouldn't even try to tackle My dads Deer without watching your vids. Been watching em now for bout 2 yrs. Hope you and your family stay safe out there. Oh yeah. A 100.00 $ an hour is an awesome price. Guy's crazy for thinking thats to much.
@@cluckhead1913 from what I've learned, even at 150 an hour that's a great deal. How much would the owner have to pay for transport and escorts to a dealer and how much would the dealer charge. Then hire transport and escorts back to the site. How long would it have to wait for service at the dealer
great job, sun cooking down on you and all ! Farm personnel should be proud to say who does there work ! As for job rate ? bring tractor Warren to fix, its on the list of todo's Warren is out doing hands on right now... tick tick tick time goes by, has not even looked at the job yet. If Warren comes to the failure, he's on the clock at the job. 100, 125, 150? time is essential , when do you need it ? No time buddy , go somewhere else but remember when you come back, it was your time , not mine you wasted!
Forever sleeving John Deere front axle yokes back when i did my trade. Those and pivot pins on both 4 and 2 wheel drive front axles. Mainly 6000 series and the older 50 series.
Go to JD Parts web site and buy the retro fit kit under the MFWD section. It will be cheaper than that $400.00 sleeve. The seal kit costs cost you about $300.00 and after that is installed the only thing you will have to replace in the future is the seals and maybe the bushing if worn. It does require a couple special tools to install which i can help you out with numbers or you can contact your local dealer. I've been putting in these kits for many years and if installed properly will work great.
This one lasted 8 thousand hours, so it'll be fine. I'm sorry I am not gonna spend a fortune on special John Deere tools to do one tractor. Thanks for your help
Hey Warren, you may be aware, but they do have an updated seal kit for that axle, RE265933 that gets rid of the pipe and one seal on the planetary side, the new seal has a wear sleeve, but you will need some drivers to install properly. The kit comes with instructions and part numbers for the drivers.
I always wondered what u charged. I knew it would low. 100 an hour is cheap as hell folks for a mobile heavy equiptment mechanic! You gotta remember he spent 150,000 dollars just to have the ability to get out to your job and start work! IE truck, tools, licensing, insurance, etc. Hes lucky to see 50 bucks of it after being honest. I was a marine technitian, let me tell you that field work is the most difficult by far, this guy is an encyclopedia of knowledge, and only wants to do the best job you will AFFORD him to do.
I feel your pain working in that environment that you're forced to I see you constantly cleaning and then Lube something and the wind blows dirt into everything. It could cause one to curse like a sailor.
I'd tell that guy, that he will get a discount on your labor rate, but he has to bring his stuff to your shop , see how much he saved when he's gotta pay for tows or trailering to your place. How many hours a day are unproductive when you are traveling just to get to the job. Then chasing parts, waiting for a call back to get approval for the repair?..... I hope you have a shop supply fee,fuel fee added to your invoice,because rags,and parts cleaner and lubricants all cost $$ and that stuff adds up. That guy probably also pays with a credit card ...so you get dinged again .. Self Employment....??
Hey Warren, I hate to tell you if you get a leak around the big hub seal you set it in to far. In my Deere experience of 38 yrs, if you don't have the special tools, give the job to someone who does. But I guess you can think about that on your way out to do it over again. Carry on and Good luck.
it is impossible to keep it out fully all you can do is hope to minimize the dust infiltration this is the same issue with otr semis when you gotta replace a wheel bearing on the side of the highway you can only hope to keep the dust to a minimum.
Try making repairs to Hummers/5tons/tanks/gennys/M Wrap's in the middle of desert. Ya learn to accept your never completely keep out dirt/grit/sand 100%. Isn't possible even in a shop setting. All ya can do is your best to keep it out and work as quick as possible.
Some of them might not know it but Your customers are extremely lucky to have a guy like you and not have to call the dealer at $160/hr+. Way cheaper and not to mention way more knowledgeable!!
I read somewhere in the comments something about a retro fit kit for this thing. Do you know the difference between them? Was the failure of this one a fault the original setup had that they fixed later? Thank you Warren
A man get paid good money for his work, best service and knowledge. You never never excuse yourself for your experience. These people are full of shit. He will return with open arms to kiss your ass. Remember to charge him more the next time. Greeting from Dublin Ireland bless you young man.
Mobile unit with mechanic is worth way more than a hundred bucks an hour where l live a call out is almost twice that .Maybe quote your rate when they call you if they dont like it they can get someone else or do it themself When they start paying mileage from another county they’ll be kissing yours pretty quick
Ha! I don't know who washes your pants, but I couldn't help notice that just in the first 1:15 minutes, although you have rags available, you wiped your fingers on your hips 14 times. Maybe you should velcro rags to the pants?
In my 65 years of living I've ran across a few assholes, some are even in the family. It's funny a person tries to help and do what's right but it's not good enough or your trying to take advantage of them but you take the loss and try and forget other wise it will bother the hell out of a person but some have the brainless idea they can show back up and ask for your help again. Honesty and hard working goes a long way with me, but be a jackass well be a jackass without my company.
100.00 an hour is very cheap Warren I worked for a self employed man and we did mobile welding repair and line boring and also some mechanic work and we charged 250 an hour in Maine of all states and we were always so far behind it wasn't funny
Thanks for not wearing the head mounted camera. As an old guy all the movement from the head mounted cameras make me dizzy. Enjoy your videos though. Thanks for spending the time putting them together. 👍
Warren I love your work. What would it take to rig a small H-frame hydraulic press on the back of your truck for pressing in seals and bearings. I know you do what you have to do in the field but it might be worth looking at just so you can press things in rather than using a hammer and punch.
I've had customers complain about hourly rates so I instead of quoting a price for the job I would ask them how much they were thinking of spending on the job. It was always more than I was going to charge them.
One man crew 100 dollars hour isn't enough that is less than shop wages in Ohio they got heat and fans you got dirt rain and snow. PS does he know what it cost to keep a tool box on wheels moving. Sorry about my ranting been there. Stay safe out there.
I love field work. You wipe your dirty hands on your equally dirty trouser seat or filthy rag. But because you need to be clean, you try your armpits. 😂
He makes $150.00 an hour I thought he said - parts in your line of work are damn expensive - holy shit - but your dealing with heavy/large equipment - brake clean is invaluable - for cleaning parts
Hello, I'm from Poland. I have a question, the cummins nta855 engine in the john deere 6810 forage harvester is overheating. I have replaced the water pump, thermostat, gaskets under the heads. Nothing helped. Blocking the viscose clutch helped a little. Is this a problem with a blockage cooler? Tx
@@grzegorzkasperski1408 Grab the top hose when it starts over heating and see if it's really hot , then grab the bottom hose and if it's way cooler that means the water isn't circulating.
They won't just charge him $160 per hour but if the book says the job should take 6 hours and they finish it in 4 then they will still charge him for 6 hours work.
I'll never understand why when people call for a service on a piece of equipment or a truck that the driver or operator is not there why they don't leave the keys with the unit... You can get away with it on equipment cause they use mostly the same keys but on a truck not a chance in hell.... Happens to me all they time sitting there and waiting for a customer.... Oh well I charge a 100 an hour
Figured you was in the 120-130ish hr rate. Given your knowledge and great work ethics. He isn't going to really like their higher rates then , along with all the pencil whipped add in in bogus charging fees... Maybe when he sees the light and returns for work you can let him know about your covid19 hazard pay increase fees just because of him ....
Hi Warren I work for site delvoper they sent me home for day becouse some one ordered a part that I did not order alls they have to do is have auto parts pick it up send it back what a company.
Warren ! eaten cake soon forgotten !! as the undertaker said to my dad one day " get em while the tears are rolling down their cheeks cos you wont get it afterwards " lol How much does JD charge ?? and how long to come out to you ?? Dave
![[Watch Party] RoV Pro League 2024 Winter | ( Bacon Time Vs PSG )](http://i.ytimg.com/vi/zM25REvnJW4/mqdefault.jpg)
Warren lane one of the greatest mechanics i know stay safe take care keep up your great work thank you for the Videos 👍⚒🇺🇸🇱🇻 hard honest work for ever blue collor
Yes, Sir * Hell This Man Is THE GDP = Gross Domestic Product Of Free World what America was so damn sad Love aU , Warren
@@FixItStupid warren is my biggest hero besids my dad and another great mechanic i am no american but he is a hell of a great guy
Warren does the best he can, as fast as he can, with the least amount of parts, you cant ask for more than that
Warren your worth more than a $100 an hour. You care more than most mechanics do. There are those that think the world owes them a favor, you can’t please them at all. I know your extremely busy! Thank you for sharing!
Thanks for taking the time to do the videos.
Hate people that complain about labor rates knowing it’s cheaper then a dealer.
I have a friend that is very experienced in a certain type of plane that is known to be a handful on landings. A new owner asked him is per hour rate, he said $85. Guy said it too expensive. My buddy asked what his deductible was, guy said $1000. He then said he would train him for free but every time he had to save the plane the owner owed him $1000. The new owner took the hourly deal.
Yes sir Sunday Fun Day ! Thanks for sharing bud hope all is well take care now!👍
You the man Warren👍🏻... Thanks again for getting her done... Hell of a good job and love your channel
Another job well done 👍 Warren, have a great weekend bud.
A day time video, I watched while the wife and I took the dog to the vet for a checkup. Thanks much for videoing!
WOW!! Seriously good deal. I paid $175 an hour at A Freight-liner dealer and got a kid that I ended telling him what the problem was!
I always hated doing an in field repair that had anything to do with having to use grease. Never fails you get everything clean as best you can or you drop something and you get a gust of wind and dirt goes everywhere or you grab the wrong rag in your haste and wipe something with it. Can't imagine what the mechanics in the military went through making repairs in the desert. Man that spindle really had some wear. You're right about the 8000 series Deere tractors. I spent a lot of time in a 8400. I have said it before I don't know what you charge but your worth every damn penny......
Tractors that big are getting near the top of your kit, well done Warren !!
I Know Warren You aren't That Man who lives to Wrong Someone so I will Say this to you in kindness;
Those that have used you to benefit from an evil Deed will pay for their Evil in a mightier way than you can imagine! Don't Let their Evil turn you bitter to the point of hating them back, Forgive them and shake the dust off your feet Because you are way better than this. people ask me all the time why you let people take advantage of you soo much? And I Myself know the Answer to this question first hand and that is they mistake our Kindness for stupidity and once we realize their scheme we walk away and not allow them any more help! but it is hard when you have a servants heart which makes it difficult to see their schemes at first. as I have gotten older i am not so quick to jump on something that appears to be good anymore God Bless you Warren and Thank you for another lesson in repair.
Warren, new to your channel. As an auto mechanic and farmer, I love your videos. Keep up the good work. Been binge watching your older videos and look forward to new ones daily. Thanks
Interesting putting the new seals in. I bored out the cylinders, new pistons, the whole nine yards on my Ford 3000 and putting it all back together now. I am having a hard time putting the crankshaft rear main seal in so I just put it all on hold until I figured out what I was doing wrong. Greasing the outside diameter looks to be a mistake I made among others. Life is tough when you don’t know what your doing but I am learning.
I feel your pain in wind like that, doing any kind of spannering, your fighting the dust out of everywhere, including yourself. Takes it toll on everything as well, grease, oils, tools, clothing, it’s a fluid sandpaper, gets in and just abrades.
Well if you ain’t worth $100 an hour, then you don’t need that business, let him find out the hard way. You seem a good man, hard working and honest for sure, worth more than that an hour just for those traits alone.
Keep safe out there, working in all conditions, and getting it done.
It's almost impossible to keep the dirt out with the wind blowing it around. You do the best you can and keep your fingers crossed. People want top quality work at shade tree prices. Like you said just wait til he gets their bill. That's going to be funny when he gets crappy work and pays for parts that he didn't need. Good job as usual!!!
At 120 an hour and how hard you work I would say that's a bargain..I'd rather have you work on my stuff versus the dealer mech who dont know shit. Your a hard working SOB Warren you deserve much more..
I made a spider plate to tighten the notched nut that you used the air hammer on . Excellent video 👍👍👍👍
Amazing how you accomplish all that heavy work by your self.
What was the parts cleaner in the blue 5 gallon pail?
Love your work, you have inspired me, thankyou
the wind............its a struggle when the weather doesnt play along. As usual having a decent service truck, with a crane is super useful for a 1 man operation ))
Good Vidio Warren. Man. I wish you lived closer. I'd hire you to do my dads John Deer. Hubs are rattling like crazy. Your one of the best I've ever seen. I wouldn't even try to tackle My dads Deer without watching your vids. Been watching em now for bout 2 yrs. Hope you and your family stay safe out there. Oh yeah. A 100.00 $ an hour is an awesome price. Guy's crazy for thinking thats to much.
Excellent video well done Warren thanks for your time and knowledge
Warren, what you like a icing cakes as that grease bag looked much the same as baking day...
Stay safe from the UK
Your worth every penny and more Warren thanks for sharing
Warren, you are worth a 100 bucks an hour all day long, I’m just sayin... 👍
He gets $120 an hour. Why do you think he's worth less?
@@cluckhead1913 from what I've learned, even at 150 an hour that's a great deal. How much would the owner have to pay for transport and escorts to a dealer and how much would the dealer charge. Then hire transport and escorts back to the site.
How long would it have to wait for service at the dealer
I would hate to tell you what a mainline mechanic and truck get per hour.
great job, sun cooking down on you and all ! Farm personnel should be proud to say who does there work ! As for job rate ? bring tractor Warren to fix, its on the list of todo's Warren is out doing hands on right now... tick tick tick time goes by, has not even looked at the job yet. If Warren comes to the failure, he's on the clock at the job. 100, 125, 150? time is essential , when do you need it ? No time buddy , go somewhere else but remember when you come back, it was your time , not mine you wasted!
Forever sleeving John Deere front axle yokes back when i did my trade. Those and pivot pins on both 4 and 2 wheel drive front axles. Mainly 6000 series and the older 50 series.
Now that a good tractor i work on 2 of them and 8320 very strong good work waren
Go to JD Parts web site and buy the retro fit kit under the MFWD section. It will be cheaper than that $400.00 sleeve. The seal kit costs cost you about $300.00 and after that is installed the only thing you will have to replace in the future is the seals and maybe the bushing if worn. It does require a couple special tools to install which i can help you out with numbers or you can contact your local dealer. I've been putting in these kits for many years and if installed properly will work great.
This one lasted 8 thousand hours, so it'll be fine. I'm sorry I am not gonna spend a fortune on special John Deere tools to do one tractor. Thanks for your help
And our dealers price on the retrofit kit is 630 dollars
@@westerntruckandtractorrepa1353 let me know if you want some I can get them and send them to you
Hey Warren, you may be aware, but they do have an updated seal kit for that axle, RE265933 that gets rid of the pipe and one seal on the planetary side, the new seal has a wear sleeve, but you will need some drivers to install properly. The kit comes with instructions and part numbers for the drivers.
I love the B.F.H. that you are using!
I always wondered what u charged. I knew it would low. 100 an hour is cheap as hell folks for a mobile heavy equiptment mechanic! You gotta remember he spent 150,000 dollars just to have the ability to get out to your job and start work! IE truck, tools, licensing, insurance, etc. Hes lucky to see 50 bucks of it after being honest. I was a marine technitian, let me tell you that field work is the most difficult by far, this guy is an encyclopedia of knowledge, and only wants to do the best job you will AFFORD him to do.
Thanks for another lesson Warren 👍
Keep up the good work brother !
Thanks for the video.
Nice work Warren 👍👌
Great job Warren
Another great video...Thanks Warren..
Never seen a "bucket pump" like that, awesome.
I want to know do you recommend the
CANDO HD2 code reader as a basic diagnostic tools For every type of vehicle
I feel your pain working in that environment that you're forced to I see you constantly cleaning and then Lube something and the wind blows dirt into everything. It could cause one to curse like a sailor.
I'd tell that guy, that he will get a discount on your labor rate, but he has to bring his stuff to your shop , see how much he saved when he's gotta pay for tows or trailering to your place. How many hours a day are unproductive when you are traveling just to get to the job. Then chasing parts, waiting for a call back to get approval for the repair?..... I hope you have a shop supply fee,fuel fee added to your invoice,because rags,and parts cleaner and lubricants all cost $$ and that stuff adds up. That guy probably also pays with a credit card ...so you get dinged again .. Self Employment....??
Hey Warren, I hate to tell you if you get a leak around the big hub seal you set it in to far. In my Deere experience of 38 yrs, if you don't have the special tools, give the job to someone who does. But I guess you can think about that on your way out to do it over again. Carry on and Good luck.
How on earth do you keep grit and sand from not getting into bearings etc when it’s blowing a Hooley! Great work as usual.
it is impossible to keep it out fully all you can do is hope to minimize the dust infiltration this is the same issue with otr semis when you gotta replace a wheel bearing on the side of the highway you can only hope to keep the dust to a minimum.
Try making repairs to Hummers/5tons/tanks/gennys/M Wrap's in the middle of desert. Ya learn to accept your never completely keep out dirt/grit/sand 100%. Isn't possible even in a shop setting. All ya can do is your best to keep it out and work as quick as possible.
This is a true mechanic here
Some of them might not know it but Your customers are extremely lucky to have a guy like you and not have to call the dealer at $160/hr+. Way cheaper and not to mention way more knowledgeable!!
I read somewhere in the comments something about a retro fit kit for this thing. Do you know the difference between them? Was the failure of this one a fault the original setup had that they fixed later? Thank you Warren
A man get paid good money for his work, best service and knowledge. You never never excuse yourself for your experience. These people are full of shit. He will return with open arms to kiss your ass.
Remember to charge him more the next time.
Greeting from Dublin Ireland bless you young man.
Very nice video, thank you.
May GOD Bless You All Always Amen MGBYAAA 😎 love watching you all the time. I miss doing that work.
Until they can do what you do as easily as you make it look they don't have the right to complain about you. Keep doing it your way.
Mobile unit with mechanic is worth way more than a hundred bucks an hour where l live a call out is almost twice that .Maybe quote your rate when they call you if they dont like it they can get someone else or do it themself When they start paying mileage from another county they’ll be kissing yours pretty quick
The John Deere dealer here is 120 in a service truck. Every area is not the same.
The wind is incredibly atmospheric, as Warren toils.
Any day you don't have to split a tractor is a good day - except for Warren who seems to like tractor splitting.
Warren, did you receive the two boxes of wiping rags? 🙂
Ha! I don't know who washes your pants, but I couldn't help notice that just in the first 1:15 minutes, although you have rags available, you wiped your fingers on your hips 14 times. Maybe you should velcro rags to the pants?
Isn't there a snap ring or something that holds the u-joint shaft into the hub?
"It's a leaker mamma!" - Steven Lavimoniere
In my 65 years of living I've ran across a few assholes, some are even in the family. It's funny a person tries to help and do what's right but it's not good enough or your trying to take advantage of them but you take the loss and try and forget other wise it will bother the hell out of a person but some have the brainless idea they can show back up and ask for your help again. Honesty and hard working goes a long way with me, but be a jackass well be a jackass without my company.
So you have had em to ?? lol
100.00 an hour is very cheap Warren I worked for a self employed man and we did mobile welding repair and line boring and also some mechanic work and we charged 250 an hour in Maine of all states and we were always so far behind it wasn't funny
Thanks for not wearing the head mounted camera. As an old guy all the movement from the head mounted cameras make me dizzy. Enjoy your videos though. Thanks for spending the time putting them together. 👍
What is that called you use to clean them parts with that air line and bucket
sorry for the dumb question, but the view around 13 min make it look like theres two tie rods. Can you explain?
Warren I love your work. What would it take to rig a small H-frame hydraulic press on the back of your truck for pressing in seals and bearings. I know you do what you have to do in the field but it might be worth looking at just so you can press things in rather than using a hammer and punch.
👍
I've had customers complain about hourly rates so I instead of quoting a price for the job I would ask them how much they were thinking of spending on the job. It was always more than I was going to charge them.
Can't you show the disassembled part of that piece?
its good stuff as always keep it coming
One man crew 100 dollars hour isn't enough that is less than shop wages in Ohio they got heat and fans you got dirt rain and snow. PS does he know what it cost to keep a tool box on wheels moving. Sorry about my ranting been there. Stay safe out there.
I have never seen that before is that a pail of brake clean hooked up to your air nozzle that is perfect I'm going to have to look I to that myself
Warren that's what we charge and that's more than fair
Hey Warren, just a thought, why not use a small grease brush to put on the grease instead of you greasing you hands up alle the time 😉
Cause I am crazy 😃
Question: How often do you change the oil in your coveralls?
Like # 474
Thanks for the video!
Your my hero!!!!!!!
Cheap work is not good.
Good work is not cheap.
did the solvent gun chill the inner surface the bearing rides on so much that the bearing fell off? is that a hack you could use in the field?
No, they are slip fit bearings.
I love field work.
You wipe your dirty hands on your equally dirty trouser seat or filthy rag.
But because you need to be clean, you try your armpits.
😂
I believe you get what you get when you treat someone like shit you get shit in return he will learn his lesson on his own dime
Nice mobile parts cleaner. Special cleaner or diesel? Handy pump for the gear oil too.
He makes $150.00 an hour I thought he said - parts in your line of work are damn expensive - holy shit - but your dealing with heavy/large equipment - brake clean is invaluable - for cleaning parts
Not for this guy cause he bitched about it
I cringe at the cost of new pins for my backhoe almost cheaper to buy shaft and a lathe.
Hello, I'm from Poland. I have a question, the cummins nta855 engine in the john deere 6810 forage harvester is overheating. I have replaced the water pump, thermostat, gaskets under the heads. Nothing helped. Blocking the viscose clutch helped a little. Is this a problem with a blockage cooler? Tx
Sounds like your radiator is plugged internally .
@@westerntruckandtractorrepa1353 How to check if it is the fault of the radiator?
@@grzegorzkasperski1408 Grab the top hose when it starts over heating and see if it's really hot , then grab the bottom hose and if it's way cooler that means the water isn't circulating.
@@westerntruckandtractorrepa1353 thanks
@@westerntruckandtractorrepa1353My radiator look like this when i open.
m.th-cam.com/video/m16fsk0jfdA/w-d-xo.html
Your awesome
good vid warren
Is the john deere front axles better than the ZF front axle?
I like them better, but that's just me.
Why didn't you use that to fill the gearbox in the grader
Because it was 50 miles at another job.
Daisy says its time to go toBurger King there pops!!
They won't just charge him $160 per hour but if the book says the job should take 6 hours and they finish it in 4 then they will still charge him for 6 hours work.
That’s how mechanics make money though
Is that a specialty grease
I'll never understand why when people call for a service on a piece of equipment or a truck that the driver or operator is not there why they don't leave the keys with the unit... You can get away with it on equipment cause they use mostly the same keys but on a truck not a chance in hell.... Happens to me all they time sitting there and waiting for a customer.... Oh well I charge a 100 an hour
That's right 👍
Figured you was in the 120-130ish hr rate. Given your knowledge and great work ethics. He isn't going to really like their higher rates then , along with all the pencil whipped add in in bogus charging fees... Maybe when he sees the light and returns for work you can let him know about your covid19 hazard pay increase fees just because of him ....
Nice
😊Hey Warren 👍
Hi Warren I work for site delvoper they sent me home for day becouse some one ordered a part that I did not order alls they have to do is have auto parts pick it up send it back what a company.
You like a portable work table for jobs like you're doing there....
Warren ! eaten cake soon forgotten !! as the undertaker said to my dad one day " get em while the tears are rolling down their cheeks cos you wont get it afterwards " lol How much does JD charge ?? and how long to come out to you ?? Dave
Do you know they make a update kit for that. It gets away from all the BS in there.
Yes, I have installed probably 50 of them.