Hallo kannst du mir bitte helfen Hab einen Waveshare Rp2040 Tiny von Amazon bestellt und die eingebauten Wiederstände sind nicht korrekt ,bei einen messtte ich 0,6 Megaohm ???
Hello friend, I have a switch that broke the clk point and lost a small capacitor that is below where you take it. 3.3v the smallest Could you help me get it I would appreciate it from the bottom of my heart The console does not turn on
Ja hast recht, nur bei RST kann es dadurch zu Verwirrung führen. Bei den anderen Punkten ist es ja real keine Diode und es geht mir um die Flussspannung zur Kontrolle.😊 Danke für den Hinweis , sehr aufmerksam geguckt😂👍🏻
Thank you for your response ! I saw that the picofly github offers version 2.73 and not 2.74, for what reason? Would it be more reliable than 2.74 @@Schaltungswahn
Gutes Video. Weiter so. Vg aus Dessau 😊
Das sieht richtig gut aus. Professionell. 👍👍
Wenn einer hier in der nähe wäre der so arbeitet würde ich sofort vorbeikommen 😅 alles gute noch und viel erfolg
Danke😊 ja ich kenne einige Leute, ich habe alle auf einer Karte markiert 😅
Hallo kannst du mir bitte helfen
Hab einen Waveshare Rp2040 Tiny von Amazon bestellt und die eingebauten Wiederstände sind nicht korrekt ,bei einen messtte ich 0,6 Megaohm ???
@@Skipperc3po 47ohm müssen es sein bei d0,clk,cmd
Hello friend, I have a switch that broke the clk point and lost a small capacitor that is below where you take it. 3.3v the smallest Could you help me get it I would appreciate it from the bottom of my heart The console does not turn on
Discord: o2ib
I will try to help
@@Schaltungswahn Thanks friend, I sent you a request on discord
Hi! I have no debug light, but the RP2040 tiny is flashed correctly and boots hekate without problem. What can i do to get the debug light?
@@yopa66 i know this issue, when you use no name rp2040 boards. I can recommend waveshare. The light is always normaly.
Rote Kabel bei der Multimeter geht immer auf der Ground bei messen :p
Ja hast recht, nur bei RST kann es dadurch zu Verwirrung führen. Bei den anderen Punkten ist es ja real keine Diode und es geht mir um die Flussspannung zur Kontrolle.😊
Danke für den Hinweis , sehr aufmerksam geguckt😂👍🏻
Hi ! I wanted to know what version of picofly .uf2 do you inject into the rp2040 chip? Just drag this file or are there other procedures to do?
2.74, just drag👍🏻
Thank you for your response !
I saw that the picofly github offers version 2.73 and not 2.74, for what reason? Would it be more reliable than 2.74 @@Schaltungswahn
Both will work, 2.74 is archived
I see thank you, but why has this version been archived? Is there a particular reason?
@@doki3664 Idk a reason it works fine
Hallo, ich suche jmd der das bei meiner OLED machen kann. Ich selbst traue mich das nicht.
Ich kommen über den link nur auf discoard nicht suf die Community seite...
Ich habe den link aktualisiert 👍🏻
Hey gibt es eine Möglichkeit dich privat zu kontaktieren? Danke Gruß
Bei Discord ist mein Benutzername: o2ib
Ansonsten findest du mich auch bei Facebook in der verlinkten Community.👍🏻
@@Schaltungswahn Dankeschön
@@LaserAltec discord.gg/YbHRxyJs