i literally have the same jeep running 8 gauge wire with just a regular tube fuse ,4 gauge ground, with the same p2s in a very similar box 1000 watt memphis amp was curious would a larger box be more sufficient
Ok thanks for your reply, I have a Rockford fosgate p1000 amp and I guess it’s to much for the 2 p2 (12”s). Maybe I will get 2 more and they will balance out
@@suzukigsxr5 Are you trying to run at 1ohm? I don't care what anyone says, 1ohm isn't the best idea for continuous use, everything is going to get warm even if the amp claims it's stable. P2's are rated 400rms. If you are pushing two P2's at 1ohm, you're at 500rms each which shouldn't really be a huge problem power wise if you keep the gains set right. But you are still running that 1ohm. Best off keeping to 2ohm. But with that p1000, that's only 500rms which would underpower the subs.
The simplicity? That looked like a shit show. Literally had the red power wire passing around the hood hinge dropping out the glove box with the amp screwed into the glove box but then ran the other power wire for the sub amp on the opposite side of the vehicle and has a couple 6x9s mounted to a board in his back seat and that’s just scrapping the surface of how not simple that setup is.
Mugs216, we all started and learned from somewhere at sometime!! You must have been a pro............later in life. Let him enjoy his achievements and possibly use some of your knowledge to help instead of just "bashing" #ijs
This system has been out of his jeep for years he now has a way better and cleaner set up, we are still young we don’t have to be perfectionists. If it works and doesn’t burn down your vehicle that’s all that matters,we have gotten better with our wiring we used to not care that much, we have learned from past mistakes
Forget the System…. The Burnout was Priceless”””” 😂😂😂
Was it not 😂😂😂
@@rigginituphicks9943 👻👻👻👻😂😂😂
Rockford fosgate always rocks 👍
Soon we will have a video with 4 p2s in this jeep
I have 1 p2 12 and it gets louder than this
Check back in the next couple weeks, the jeep has 4 p2s now
I really don't think he did it for competition
We didn’t these are just our set ups for daily driving and enjoying music, we aren’t to the competition stuff just yet
Jus sayin, I run mine in a 2002 Ford f250
These 4 p2s are way louder then those 2 were. The video should be made within the next week I’m hoping!
What the haggard hell is this setup.
i think you should build a bigger box for two P2.. an 8" AEROPORT box
He got rid of these and then got 4 p2s and those things were crazy but now he’s back down to 2 Sony xplodes but they still slap
What sub enclosure do you have the P2s in ?
That's all you need fam
i literally have the same jeep running 8 gauge wire with just a regular tube fuse ,4 gauge ground, with the same p2s in a very similar box 1000 watt memphis amp was curious would a larger box be more sufficient
Yes
Also a larger gauge power wire, perhaps 4 gauge
How do you reduce the body shaking?
Hey do you have any issues with these subs having a burning smell when you have them bumping for about 5-10 mins?
Never with these p2s, I would check your gains and all that and make sure your subs aren’t clipping or anything
Ok thanks for your reply, I have a Rockford fosgate p1000 amp and I guess it’s to much for the 2 p2 (12”s). Maybe I will get 2 more and they will balance out
That means there too loud. Turn the bass down a little bit
@@suzukigsxr5 Are you trying to run at 1ohm? I don't care what anyone says, 1ohm isn't the best idea for continuous use, everything is going to get warm even if the amp claims it's stable. P2's are rated 400rms. If you are pushing two P2's at 1ohm, you're at 500rms each which shouldn't really be a huge problem power wise if you keep the gains set right. But you are still running that 1ohm. Best off keeping to 2ohm. But with that p1000, that's only 500rms which would underpower the subs.
nice subs but i would of got a new car first
Bro why all that wiring showing
are these the P2D2s?
Are these ran on 1 ohm ??
What amp do you have?
lol
What was the dimensions for the box?
Hell yeah, bumpin'!
bruh that burnout XD
We had to add it 😂😂it was to funny
Man, i love the simplicity!!!!
Sometimes simple is enough, appreciate the love man!
The simplicity? That looked like a shit show. Literally had the red power wire passing around the hood hinge dropping out the glove box with the amp screwed into the glove box but then ran the other power wire for the sub amp on the opposite side of the vehicle and has a couple 6x9s mounted to a board in his back seat and that’s just scrapping the surface of how not simple that setup is.
Mugs216, we all started and learned from somewhere at sometime!! You must have been a pro............later in life. Let him enjoy his achievements and possibly use some of your knowledge to help instead of just "bashing" #ijs
@@walterhicksiii3525 I feel you
Lmao, what a cobbled up mess. Sorry bro but that looks terrible. One of the worst I've seen.
This system has been out of his jeep for years he now has a way better and cleaner set up, we are still young we don’t have to be perfectionists. If it works and doesn’t burn down your vehicle that’s all that matters,we have gotten better with our wiring we used to not care that much, we have learned from past mistakes
What’s with the hate? Aren’t we all bass heads, chill with the negativity we got enough of that shit in this world already