I love it, I placed my order but it was late, so novritsch sent a rubber knife with it as a small apology, the ssp1 runs so smoothly, I give 10/10, much love from NC
I just got my ssp1 today and was having one hell of a time disassembling it and reassembling and thank god norvistch shows you very clearly how to do this and the guns heavier than my real sig p320 and feels just as good, and tracer at the end makes it feel like jhon wick approved the gun 😂
I play at a cqb field and haven’t cleaned it in months and it’s not nearly as dirty as the video, really shows the difference between indoor and outdoor fields
Small confession: instead of the mech oil described in the vid, for metal-on-metal I used gun grease LT2 from Abbey. I know in general this is used for metal-on-metal airsoft parts, but now I'm worried my SSP will break because I didn't follow the instructions exactly...
Be careful with silicon oil, it can cause damage of metal parts when it's very strongly touching (it will push liquid part of oil out and rest what will remin is more like chewing gum so it stucks and when you use force you can damage it), it's not probably case in airsoft pistol, but things like some hinges etc...it's the best for plastic and rubber, for metal parts I am using balistol. Balistol should be ok even for airsoft because it's natural, not from petroleum, but I didn't test it.
Short answer: no Take some small cups or bowls to store the small parts so they don't fall of the table and you don't lose them. The risk of your gun would be a lot higher if you didn't maintain it, so just follow the instructions or get somebody from your field to help you the first time
Wouldn't it just be a lot easier to put the disasembled gun into an ultrasonic cleaner, then oil them up again. Or is there anything that might get damaged from that?
I obviously haven’t’ seen your particular gun but I highly doubt it’s faulty. These have a free floating outer barrel, it’s designed to be “loose”. I knew of a guy who bought and sold several airsoft Glocks for the same reason, each time complaining that it was too loose.
Hi Novritsch, just received my SSP1, just wanted to know if it's normal for the left-handed security to be a little loose (more than the right-handed)? It kind of moves when just touching it, but it don't put the security on until I really push it. Thanks in advance! :)
He duped us bud! He won't send you a replacement. He'll tell you that you have to place a new order then he'll send you something....SOMETHING. SMH worst company ever. Go online and read the reviews man. There's thousands of pissed off people! But, you live and you learn right! Good luck getting that gun replaced lol
@@G3MKnight can you send me the link to them please i would like to see them for myself ...not that i dont believe you i would like to make my own opinion based on all the facts and i want the good and bad. please :)
If you have a gun cleaning kit you could use that, or get multipurpose oil at a hard ware store, you can find wipes on Amazon.com just look for gun cleaning wipes or cellulose wipes. Hope that helps :)
wie bekomme ich den Recoil springguide aus dem schlitten wenn ich den cut out slide montiert habe? kann ihn nicht ausinanderschrauben und anders passt er irgendwie nicht
Okay someone please help me, I have a gbb 1911 and the nozzle gets stuck forward when I run out of ammo so I have to manually push it back and when I take it apart and pull the nozzle it just stays in one place and doesn’t fly back, how do I fix this with out replacing the nozzle ?
You loading nozzle spring might be warn out. That being said it was happened with my AW Custom Hi-Capa and I just kept pushing it back and lubed the hell of the nozzle. Issue only happens every couple months now and relubing it fixes it. Might just be dry
Hey I have a 1911 john wayne commemorative. A small piece of plastic broke off today ,from the inside I'm guessing, also now the slide locks wierd when the last round is shot. Can you give me some advice on how to fix it?? Thanks👍
Hey novritsch I know you say don't mess with guns but I installed a new trigger into this and it still works with the hammer and everything but only when it has gas in it it stops resting the trigger do you have any tips?
I wouldn't recommend it buddy! I bought the ssp1 back in May and didn't receive it until 07/11/2019..... yesterday. That's 2 months. Also, the gun is defective AND he sent me the wrong clip because I ordered a CO2 ssp1 and they sent me instead a gas. There are a lot of people very uncomfortable with his product. Go online and read the reviews and you'll see. It's a garbage company, isn't that right Mr. +Novritsch @Novritsch
@@G3MKnight Did you order it from your respective warehouse(US/European) and was it still on preorder when you ordered? I've ordered from the US warehouse 7 time and got my order within 1 week every time. Also the customer service is great so I'm sure if you sent them an email you'd be fine. I broke the O-Ring on my cylinder head by my own stupidity and after an email and a 3 hours I was sent a coupon code to get a whole new cylinder head for free.
@@MaIGaming oh another ssp1 user. Do you have any solutions for the feeding issue? My irritation is even if the magazine is perfectly done it fails to feed the BBs into the gun
@@gunslingerluckytankijunky I'm not an SSP1 user, just bought from the site a lot. That being said I use a hi-capa, if you're stacking it right it may be something with the bucking or hop chamber that's causing the feeding issue. I'd suggest emailing Novristch.
@Novtrich i just bought this gun.. This gun is special, not becose you sell these. It's becose you show us ,how to fix these. You really dont need money huh!
It's true that you will get oil into your barrel - but the o-ring of the piston needs some oil to seal and to reduce wear. Just don't overdo it. Less is more.
Hey novritsch when your cleaning the barrel you shouldn't pull the cloth back through the barrel you are putting contaminants back in to the barrel well it does with a real gun I am guessing it would be the same with airsoft .great channel though love it want to get in to air soft my self once I find a affordable airsoft gun
I have a question, whenever I put bbs into my ssp1 and put the mag into the gun then pull back the slide, it pushes the bb forward but not far enough and jams it every time I try and pull it back, and then when I pull it back again the next bb comes out and they both fall out and I’ve tried one bb at a time, different angles, it doesn’t work is something broken
Try cleaning the groves more and adding lubrication if you haven’t. Now I’m not him but by the sounds of it your slide is probably crammed with shit and is creating too much friction for the slide to cycle properly
@@XOTheEmreOX hey, thanks for the reply. That's what I initially did but it didn't work. Although, I did get official Novritsch technical service on the same day. Dominic was very helpful and efficient. Wish I could have left a review
Dude, don't order one. SMH worst company ever. Go online and read the reviews man. There's thousands of pissed off people because his company will send you the wrong order on purpose so that you later have to place another order for them to send you the right stuff, but be careful. There's proof online that every time you place an order they'll send you something wrong on purpose! But, you live and you learn right! Buy instead from Pyramid Air guns or official manufacturer. Not this fucking clown. But hey, it's your money!
I love it, I placed my order but it was late, so novritsch sent a rubber knife with it as a small apology, the ssp1 runs so smoothly, I give 10/10, much love from NC
Honestly if I get a rubber knife with it if it’s late I would not even be annoyed that I was late
Danny Ross same
How long was the wait for the gun to arrive?
Make prank shooting mr beast
My gun came 2 days too early. Wow!
thank god it uses a similar system to a real 1911, that makes thing much much easier.
I just got my ssp1 today and was having one hell of a time disassembling it and reassembling and thank god norvistch shows you very clearly how to do this and the guns heavier than my real sig p320 and feels just as good, and tracer at the end makes it feel like jhon wick approved the gun 😂
Why do you want my sandwich internet man
How did you get the slide off? I cant get the thing off to remove the slide
Thank God, theirs Chad's like you in the world I thought I broke my SSP1 at first but just need to clean it more often 😂😂
Very good video. It is important to take care of your gun. My dad is always cleaning his 1911 and now we can clean our guns together. Thanks dude! :)
I dont have the SSP1 yet, but KJW pistols I use are pretty similar. This is really helpful thanks! - pistol sniper (hehe)
He literally just bought a huge batch of KJW Hi capas and upgraded them for a profit.
@@fjjwfp7819 it just a standard co² upgrade that KJW does out of the box for years now.
SSX-23 is the true sniper pistol
I play at a cqb field and haven’t cleaned it in months and it’s not nearly as dirty as the video, really shows the difference between indoor and outdoor fields
also the guy plays like every weekend getting down in the woods/mud and probably has its own testfire range too :D
Sowas fehlt von den Großen Herstellen, solche Infos-Videos zu Ihren Produkten. Weiter so aus Deutschland. Habe bald auch ein SSP 1 in meine Besitz.😁
I’ve had the ssp1 for about 2 years and it only ever jammed twice and both times were out of my own stupidity
nice i will start airsofting in a few months then i will be 18 then its legal in the netherlands
Als je wil kan je in België spelen ik ben ook17 jaar en speel airsoft.
U have to be 18 to play airsoft?
Reece in most country’s , yeah.
me la suda
It’s been 2 years how’s it going
this thing is actually pretty cool, definitely would recommend!
The best out if the box gun. You can shoot right after ypu get the gun, becose it comes maintained. AMAZING!
Moi
Just got both my ssp1’s today they’re awesome
Just bought the ssp1 and the holster can’t wait for it to get here (:
One quesiton hows the feeling of the ssp1
@@itsemre1591 absolutely amazing
@@itsemre1591 no to big but big enough that you know your holding a proper pistol
@@itsemre1591 the recoil is amazing as well
@@BOTthelesser thx Bro 🙏🏻
Small confession: instead of the mech oil described in the vid, for metal-on-metal I used gun grease LT2 from Abbey. I know in general this is used for metal-on-metal airsoft parts, but now I'm worried my SSP will break because I didn't follow the instructions exactly...
Did it break?
@@stunamungusbackwards255 Funnily enough it did. Trigger pin just disintegrated. Barely used it, only serviced it once. Sticking with TM in future.
@@BohemianFish oh that one hurts feels bad man
Why can i not pull out the black circle that has a noch that releases the spring it feels like its stuck in it. does anyone know what's happening?
I love Novritsch ASMR
In the case you have CO2 magazine do you have to clean the inside of the magazine (where the cartridge is placed)?
Be careful with silicon oil, it can cause damage of metal parts when it's very strongly touching (it will push liquid part of oil out and rest what will remin is more like chewing gum so it stucks and when you use force you can damage it), it's not probably case in airsoft pistol, but things like some hinges etc...it's the best for plastic and rubber, for metal parts I am using balistol. Balistol should be ok even for airsoft because it's natural, not from petroleum, but I didn't test it.
Just changed out my outer barrel with a no orange tip version and added the threaded tip for a silencer so I can light up some bb's !!!
Why does my whole slide wobble so much? You can literally hear it rattle! I really don't understand..... does anybody have a possbile fix?
I have these co2 cartridges that have some silicon in them and I was wondering if it is okay to use those
probably
Am could I break my ssp while doing this I'm really new
If you are careful no
Short answer: no
Take some small cups or bowls to store the small parts so they don't fall of the table and you don't lose them. The risk of your gun would be a lot higher if you didn't maintain it, so just follow the instructions or get somebody from your field to help you the first time
Doesn't the rubbing alcohol destroys the Hop Up Rubber?
use brake cleaner to clean it out.
You’d still have to be careful not to push the rod into the rubber. Only let the alcohol soaked pieces of cloth touch the rubber.
Man I want this so bad but of corse Airsoft is banned in Australia 😭
TOXIC_ AUSSIE oof rip
Well atleast you didnt use hundreds of euros on broken airsoft guns with no income 🥲😥
Really hot environment 30 degrees I love on southern Texas it reaches well over 90 degrees
He’s from Austria, I’m pretty sure he was using Celsius
Wouldn't it just be a lot easier to put the disasembled gun into an ultrasonic cleaner, then oil them up again. Or is there anything that might get damaged from that?
Mein Frage, wenn ich Sie CO 2 SSP1 wähle ist es möglich die SSP1 trotzdem mit Gas Magazine zuspielen?
I got my ssp1 two days ago, and my outer barrel is really loose. How do I fix that?
Evilith Jr. any resolution on that?
I obviously haven’t’ seen your particular gun but I highly doubt it’s faulty. These have a free floating outer barrel, it’s designed to be “loose”. I knew of a guy who bought and sold several airsoft Glocks for the same reason, each time complaining that it was too loose.
i had the same question. dont worry about it, i am pretty sure this is intentional.
Thank you this video wioo be super useful in the future!
is the purple gas nozzle supposed to stick in the hop rubber ??? expelling most of the mag gas on first shot
Didn't order it yet, but i will get it at my Birthday. Anywat thank you for this video.
Hi Novritch, I just get my SSP1 and I have to sen it back because of too much problems already
Hi Novritsch, just received my SSP1, just wanted to know if it's normal for the left-handed security to be a little loose (more than the right-handed)?
It kind of moves when just touching it, but it don't put the security on until I really push it.
Thanks in advance! :)
He duped us bud! He won't send you a replacement. He'll tell you that you have to place a new order then he'll send you something....SOMETHING. SMH worst company ever. Go online and read the reviews man. There's thousands of pissed off people! But, you live and you learn right! Good luck getting that gun replaced lol
@@G3MKnight can you send me the link to them please i would like to see them for myself ...not that i dont believe you i would like to make my own opinion based on all the facts and i want the good and bad. please :)
Yes that's completely normal it happens with ambi safeties sometimes and it's not an issue unless it gets really loose.
What are good alternatives for the oil and silicon lubricants and what kind of tissues are they
If you have a gun cleaning kit you could use that, or get multipurpose oil at a hard ware store, you can find wipes on Amazon.com just look for gun cleaning wipes or cellulose wipes.
Hope that helps :)
@@Tyler-es thanks this helped me i couldn't figure out what kind of wipes the were
@@gtaledged7670 no problem
wie bekomme ich den Recoil springguide aus dem schlitten wenn ich den cut out slide montiert habe? kann ihn nicht ausinanderschrauben und anders passt er irgendwie nicht
honestly wish i watched this years ago
So how do you know when to clean it? Once every month, ooor?
I'd do it about every week, or after every 2-3 times of shooting it
@ZOMBÏ3SHARK really I'd clean it every time you put a few hundred rounds through it, that should be sufficient.
@ZOMBÏ3SHARK yep, I'm still waiting to buy mine, hopefully soon though.
I think he said gas you clean after every 60 magazines used and co2 it’s 30 magazines
I may be wrong tho
@@Elzrap youre rght
In trying to disassemble the slide, no matter how hard I pull on the notch I can’t get it out.
You should make a refill kit
Novritsch next time you come to the U.S can you play cqb with me it would be cool because you got me in to airsoft 3 years ago and your why I play lol
Okay someone please help me, I have a gbb 1911 and the nozzle gets stuck forward when I run out of ammo so I have to manually push it back and when I take it apart and pull the nozzle it just stays in one place and doesn’t fly back, how do I fix this with out replacing the nozzle ?
You loading nozzle spring might be warn out. That being said it was happened with my AW Custom Hi-Capa and I just kept pushing it back and lubed the hell of the nozzle. Issue only happens every couple months now and relubing it fixes it. Might just be dry
Could you use the same principle on a m1911
This guide applies to pretty much any gas blow back system
Great video, thanks Nov!
It’s kinda weird how little people haven’t subscribed yet
That's because they can't reach the "SUBSCRIBE" button.
....you didn't know that...?
Lol. But literally there were 289 subs a while ago
I have a co2 cartridge stuck inside and don't know hoe to get it out any suggestions
Hey I have a 1911 john wayne commemorative. A small piece of plastic broke off today ,from the inside I'm guessing, also now the slide locks wierd when the last round is shot. Can you give me some advice on how to fix it?? Thanks👍
Hey novritsch I know you say don't mess with guns but I installed a new trigger into this and it still works with the hammer and everything but only when it has gas in it it stops resting the trigger do you have any tips?
Can't wait to get mine
Thanks for the tips very helpful
Hello Novritsch will you ever make a full automatic pistol / rifle?
I wouldn't recommend it buddy! I bought the ssp1 back in May and didn't receive it until 07/11/2019..... yesterday. That's 2 months. Also, the gun is defective AND he sent me the wrong clip because I ordered a CO2 ssp1 and they sent me instead a gas. There are a lot of people very uncomfortable with his product. Go online and read the reviews and you'll see. It's a garbage company, isn't that right Mr. +Novritsch @Novritsch
@@G3MKnight Did you order it from your respective warehouse(US/European) and was it still on preorder when you ordered? I've ordered from the US warehouse 7 time and got my order within 1 week every time. Also the customer service is great so I'm sure if you sent them an email you'd be fine. I broke the O-Ring on my cylinder head by my own stupidity and after an email and a 3 hours I was sent a coupon code to get a whole new cylinder head for free.
@@MaIGaming oh another ssp1 user. Do you have any solutions for the feeding issue? My irritation is even if the magazine is perfectly done it fails to feed the BBs into the gun
@@gunslingerluckytankijunky I'm not an SSP1 user, just bought from the site a lot. That being said I use a hi-capa, if you're stacking it right it may be something with the bucking or hop chamber that's causing the feeding issue. I'd suggest emailing Novristch.
@@gunslingerluckytankijunky on novritsch teching channel I'm pretty sure there's a video about that. I haven't watched it, but I guess if might help
Can you use silicone oil?
New to airsoft, I know it’s an old video but is shopping to uk possible with everything “nessisery” for the SSP1?
@Novtrich i just bought this gun.. This gun is special, not becose you sell these. It's becose you show us ,how to fix these. You really dont need money huh!
When are you guys gonna restock some parts?!?
please restock the ssp1 inner barel and hopup please!
I have silicone oil and rubbing alcohol but not the mechanic oil. What can I use as a substitute?
Is this a good choice for a beginner gun because I’m considering to buy it to begin airsoft
i've had it since 5 or 6 months and im loving it if anyone has a question about the ssp1 just ask me
Ive got the ssp-1 now for 6-7 months now and i havent cleaned it yet :D shoule i ?
*Should
Hi bud, does your whole slide wobble alot aswell? I can literally hear it rattle when shaking it! I really don't understand..... can you help me out?
@@XOTheEmreOX its normal those metal parts just shake a little and the screws can be little loose but nothing to be worried about
@@Idk-nc3iv I mean your gun isn’t an AK and even AK’s eventually need maintenance
how long would it take to ship to west coast Canada? (British Columbia)
bro i need subitles what the hell is thirsty magazines and btw why recommend oli in the nozzle where the gas comes in? you will get oli in barrel lol
It's true that you will get oil into your barrel - but the o-ring of the piston needs some oil to seal and to reduce wear. Just don't overdo it. Less is more.
disassemble the blow back housing and use actual silicon grease on the o-ring. it will stick and not dry out.
The gas expelled out through the barrel has oil added to it duh😂
the spring thing is really really really hard to get out
I see a gun naughty naugthy
My green gas mag aren’t feeding... bbs are installed correctly it just doesn’t feed them...
Thanks for the maintenance
Hey novritsch when your cleaning the barrel you shouldn't pull the cloth back through the barrel you are putting contaminants back in to the barrel well it does with a real gun I am guessing it would be the same with airsoft .great channel though love it want to get in to air soft my self once I find a affordable airsoft gun
just orderd my ssp1!!
I now thinking about to buy an airsoft but i'm left handed and want to ask to this pistol can be changed to left handed loading?
i took the slide off and am struggling to get it back on 😀
what does he mean "knob align with the slide catch"
I have a question, whenever I put bbs into my ssp1 and put the mag into the gun then pull back the slide, it pushes the bb forward but not far enough and jams it every time I try and pull it back, and then when I pull it back again the next bb comes out and they both fall out and I’ve tried one bb at a time, different angles, it doesn’t work is something broken
Try cleaning the groves more and adding lubrication if you haven’t. Now I’m not him but by the sounds of it your slide is probably crammed with shit and is creating too much friction for the slide to cycle properly
The first part of the slide won't come out. No matter how I try, it always gets caught on the other parts of the barrel.
try squeezin on both ends until the spring is fully retracted, then pull it to left or right side
@@XOTheEmreOX hey, thanks for the reply. That's what I initially did but it didn't work. Although, I did get official Novritsch technical service on the same day. Dominic was very helpful and efficient. Wish I could have left a review
as it has proven to work on green gas, I don't want to use it on CO2 ampoules
Novritsch "Super Sniper Pistol 1"
I’ve always wanted this gun but I never had enough money
Dude, don't order one. SMH worst company ever. Go online and read the reviews man. There's thousands of pissed off people because his company will send you the wrong order on purpose so that you later have to place another order for them to send you the right stuff, but be careful. There's proof online that every time you place an order they'll send you something wrong on purpose! But, you live and you learn right! Buy instead from Pyramid Air guns or official manufacturer. Not this fucking clown. But hey, it's your money!
Can you decock the hammer without the Gun shooting
When does it come back in stock
I bought this pistol a while ago and the front sight fell off how can I fix that
I can’t get the second part off
I have a problem I pressed the disassemble button by accident and now my gun is jammed what do I do
I found tgis the day after i orderd tge ssp1
Literally when I put the CO2 in and tighten it all of it just shoots out the top of the magazine what do I do?
Contact technical service about this, they can help you fix that.
How do you buy a pistol stand for the SSP1
Maybe an 1911 stand will work
Ist es möglich die SSP1 auf 0,5 (für CQB )Joule zu drosseln?
Rob1n ja
Du musst im Shop ein anderes Mosel kaufen
When I hit the little slide button the slide catch won’t come out no matter how hard I try any tips
Preston guillot you have to pull the slide back and then take it out and what pistol do you have
How do you do maintenance on your gun with the cut out slide? Ive been trying to do that for a while now but I can't.
Mine won’t come out what do I do to take the outerbarrel off
mit wievelm magazinen wirs die waffe geliefert
When I try to buy these it doesn’t let me, it said Negative -10 available
Alessandro Bajona same
Can I also use puff dino silicone oil? Because its hard to order the kit or novritch brand in the Philippines. Mostly not available.
Pls help i cant get my slide piece off No matter how hard i try
Is it possible to refill these bottles once they're finished?
my saftey fell apart when i took it apart
very good video you help me to clean my ssp1 :)
When duz the pistol itself ship to Bangladesh Emmy English good no
What’s up I love your channel
power stroking (sling shoting the slide)?
How many bbs can the ssp1 shoot with a full mag of green gas?
Please help idk ifs it’s dirty or broken but my slide is stuck and Won’t move
I AM a beginer and i have aco2 capsule witch has oils in it it is ASG and asg says that its good but i am afrid that it's going to mess up the hopup