Van Build Step 2: Patching Holes & Treating For Rust
ฝัง
- เผยแพร่เมื่อ 11 เม.ย. 2024
- After removing all of the old equipment from the van, it was time to patch the holes in the floor and treat the interior scratches for rust. I was lucky because there really wasn’t any rust at all, just some exposed metal. So I sanded over the previous scratches and began the rust treatment process. Along the way, I became slightly concerned that some of the bolts I removed were needed for structure, so I decided to leave a few that weren't holding down the floor mat. After the holes were patched, I painted the treated areas with a white rustoleum paint. The van is now prepped and ready for the subfloor, so stay tuned because that video is on it’s way next!
Products I used:
This page includes affiliate links to the products I used in the video. If you take action and purchase a product through clicking one of these links, I’ll make some commission money from it at no extra cost to you. This enables me to continue providing you with my van conversion content, so thanks!
Wire brush attachment for drill: amzn.to/4auDQxP
Black rust reformer: amzn.to/4cQTRQh
Red oxide primer: amzn.to/3UpYlq9
Jb Weld steel stick: amzn.to/3Q0wPwD
White protective enamel paint: amzn.to/3VU0KdC
Scour pads: amzn.to/43VaoyC
IG: / laurakcollinss
If you’re interested in my haircare content, check out my business channel at: / @haveagoodhairday
Honestly this is one of the best step-by-step demos that I’ve seen. Thank you for being SO detailed!
Of course!! So glad it was helpful!
My bags are packed and I’m ready for a roadtrip!
My new van had that along the seams your good.
Phew good to know! I may go back and remove those screws and fill the holes then
Awwww nice its my favorite van girl builder. Woo hoo.
🤗
I think that stuff is from builder it is called seam sealer.
Oh this is great to know, thank you
Nice job, You cant go wrong with the primer and the oil based Rust-Oleum J-b weld is some strong Sh!t! keep up the great work new sub here 🙂
Thanks so much!