A Hint: set your boom at 38 degrees so you don't have to pump your hoist. Also, soft on the swing, because the bevel gear is not strong enough to handle the torque of the swingers, and if you want to really throw your bucket out, momentarily put your bucket onto the pile when you start your swing.
+Annie Dostal Thank you for your adviceses. If i 'll set the boom at 38 degrees the max weight must be about 1.5 tons. The bucket is about 1m3 and weights about 500kg. 1 m3 sand weights 1.5t, so the total weight is about 2t. The suggested angle for this weight is over 44 degrees and i work it at 46 degrees.
@@AETOS1973one Cuy 745 l 1500kg +- or one cum1000 l 2000kg+-wen is tu big not fill whom too big I'm operator also 30 RB ar stb. Pile Work. L=Liter cuy=cubic yards cum =cubic meters The bucket content does not Determined the angle of the Mast but the lengt, this is not Crane work
Back when crane operators where operators!
ROUSTON BUCYRUS 30 RB - Excavator Dragline -Soaked.
A Hint: set your boom at 38 degrees so you don't have to pump your hoist. Also, soft on the swing, because the bevel gear is not strong enough to handle the torque of the swingers, and if you want to really throw your bucket out, momentarily put your bucket onto the pile when you start your swing.
+Annie Dostal Thank you for your adviceses. If i 'll set the boom at 38 degrees the max weight must be about 1.5 tons. The bucket is about 1m3 and weights about 500kg. 1 m3 sand weights 1.5t, so the total weight is about 2t. The suggested angle for this weight is over 44 degrees and i work it at 46 degrees.
Im study the same. Im think the Clutch not the right adjustment.
@@AETOS1973one Cuy 745 l 1500kg +- or one cum1000 l 2000kg+-wen is tu big not fill whom too big I'm operator also 30 RB ar stb. Pile Work.
L=Liter
cuy=cubic yards
cum =cubic meters
The bucket content does not
Determined the angle of the Mast but the lengt, this is not Crane work
@@weberjack5483 I m sorry but I didn't understand. What's your point? What are the numbers that you have wrote.
That's the pucket content in liter,and the Approximat weight
A classic example of engineering and physics being applied. Poetry in motion!
Κ εγώ είχα αμολειψια από το 94 έως το 06 στον άξιο. με 1 30 αρη κ 2 38 άρια στον κάστανα
Dorman 6LE2 engine.
Good old machine
Great video. I love draglines.
operador no vueno no valancea vien el vote yo soy draguista
Ruston
Nice work . Nice machine and a smooth operator !
Great machine, with a great operator!
great video!the Ruston Bucyrus 30 was a nice machine!you can make more videos??
Thank you for your comment. In a few days I 'll upload another one.
ΓΕΙΑ ΣΟΥ ΡΕ ΣΑΚΗ!!!!! ΤΟ ΕΣΤΡΩΣΕΣ ΤΟ ΜΗΧΑΝΗΜΑ ΒΛΕΠΩ.
ΝΙΚΟΣ ΚΑΡΑΜΠΑΓΛΗΣ Ναι Νικο. Κατι κανουμε. Αν δε το προσέχουμε θα μας αφήσει....
Thank you.Me too
great video !!
Σε ποιο ποτάμι εδώ δουλεύεις ρε Σάκη
Thomas Nofkidis Στρυμωνα