I’m on my 5 th 333g I’m fixing to get a 335 , I’m hoping it’s gonna stop the over heating problem I have here in Louisiana. I checked out a cat 299 today and it just doesn’t have the leg room.
Awesome video and breakdown. Helps me make the decision on which way to go. Needing a big brother to our 317G. I think the 333P is the next purchase here shortly. Thought we wanted the 335 but if it’s just pressure I’m gaining then I don’t need it.
These machine doesn't compare to a Minotaur it's 5k less lbs. this machine will self destruct in 2k hrs is my option. To much power and not enough Chinese steel.
Still running the same old 3.1 liter yanmar motor with a reflash to hit a pie in the sky number of 118hp. But its torque we need in these CTL’s not horsepower and it’s still down on displacement to the competition. Time will tell how it performs in triple digit Texas heat with a mulching head 8 hours a day for an entire summer. Hopefully better than the 333 which needs a roof cooler to even have a prayer.
We have 3 333gs in our rental fleet had to stop renting them with bushhog attachment over heating big time coolers were plugging up had to take service truck out and blow them all out these are the hardest machines to work on and the junkiest machine that junk Deere makes!!!
Now what they need to do is actually make an operator that knows how to run that machine before they give him all the fancy stuff that don't make a hill of beans out on the jobsites. Remember the machine don't make an operator, the operator makes the machine.
If we could keep our 6 331 and 333 going would be awesome. Deers drive motors are completely junk not enough oil capacity. The bucket pins are completely junk
The only thing that would stop me from buying a John Deere skid steer that dumb stupid door. It needs to go up over your head not out in front where you can't get out in case of an emergency
It was never about horsepower. It is all about the hydraulic power out of the Engine -Pump combination. The brands that sell off Hp are typically the inferior model.... and a salesman who focuses on it is weak becasue he does not know CTL/SKS
I’m on my 5 th 333g I’m fixing to get a 335 , I’m hoping it’s gonna stop the over heating problem I have here in Louisiana. I checked out a cat 299 today and it just doesn’t have the leg room.
Awesome video and breakdown. Helps me make the decision on which way to go. Needing a big brother to our 317G. I think the 333P is the next purchase here shortly. Thought we wanted the 335 but if it’s just pressure I’m gaining then I don’t need it.
Can you do a video on the new 450/p dozer? Also how does the 335/p stack up against the Case Minotaur?
I want the same video
@@pr4lviperI agree
The 335p is no where near the Case Minotaur.
These machine doesn't compare to a Minotaur it's 5k less lbs. this machine will self destruct in 2k hrs is my option. To much power and not enough Chinese steel.
P-Tier
Nice video! Thank you
When will you be doing a lifting comparison video?
335 is there a forresty package?
two mins in and this guy already said "a'right so check it out" x 3... not gonna hang around for more of that
There’s a lot of competitors in that class. Case tv620, tak tv12,asv rt135 etc
Makes me want to change from bobcat I think I’m going to go with a 333p
No comparison on the market? The Case TV620B is a direct competitor. It also weighs 3000lbs more.
what is the price on the feaured machine?
What is the price of the 335p?. I am planning to buy one this year, but I can’t decide which one is the best option, John Deer or Bobcat.
Around 125 is the numbers I’ve seen in Georgia
Still running the same old 3.1 liter yanmar motor with a reflash to hit a pie in the sky number of 118hp. But its torque we need in these CTL’s not horsepower and it’s still down on displacement to the competition.
Time will tell how it performs in triple digit Texas heat with a mulching head 8 hours a day for an entire summer. Hopefully better than the 333 which needs a roof cooler to even have a prayer.
Finally!!!!!
What's the fuel tank made of?
nice starbucks watch
Thanks for sharing
Still waiting on the version from the Alien Movie back in the day *ANY DAY NOW JOHN DEERE et al!*
Compare DEVELON dtl35, specs seem the same
I wanna see how Jonny comparte to the other . Specially against big Bob. T870.
The T870 is a joke.
Why would you even compare the two. T870 is an absolute joke and that’s comparing it to just about any brand out there. Lol
I like to see it because always when they compare their biggest machine vs the bobcat t770
Na compare the Takeuchi TL12 and the ASV 135 to it.
We have 3 333gs in our rental fleet had to stop renting them with bushhog attachment over heating big time coolers were plugging up had to take service truck out and blow them all out these are the hardest machines to work on and the junkiest machine that junk Deere makes!!!
Now what they need to do is actually make an operator that knows how to run that machine before they give him all the fancy stuff that don't make a hill of beans out on the jobsites. Remember the machine don't make an operator, the operator makes the machine.
Oh No!... The Door opens with the bucket up.... you just ruined the 1 selling point of all the roll up door guys. Thanks Travis!
If we could keep our 6 331 and 333 going would be awesome. Deers drive motors are completely junk not enough oil capacity. The bucket pins are completely junk
Does it come with an Automatic fart sucker so them ole bean farts don't stink the cab up ?
। বগ।।😅
Yanmar? Go Cat Power!!!!
A broom
The only thing that would stop me from buying a John Deere skid steer that dumb stupid door. It needs to go up over your head not out in front where you can't get out in case of an emergency
ASV has more horse
It was never about horsepower. It is all about the hydraulic power out of the Engine -Pump combination. The brands that sell off Hp are typically the inferior model.... and a salesman who focuses on it is weak becasue he does not know CTL/SKS
@@MonroeTractorGuy.16that makes more sense.