How to Change the Code on a Ghost Immobiliser | Autowatch Ghost 2 Immobiliser | Dragon Car Alarms

Changing the code on a Ghost Immobiliser is done in three steps.
1 deactivate the immobiliser by entering your current code.
2 push down the accelerator or gas pedal
3 enter your new code choice and then enter again to confirm.
This works for most cars unless your installer has told you otherwise.
For expert advice contact us by phone or via our website.
www.dragoncaralarms.co.uk/con...
Please like us on Facebook - / dragoncaralarm
Follow us on Instagram - / dragoncaralarms_uk
#ghostchangecode #ghostimmobiliser #autowatchghost

[@SAGGYSACKS]

Are you keeping your foot down on the accelerator the whole procedure

[@FrostyTheSnowmannn]

No you don’t, as soon as you get it into reset mode you can bring your foot off.

[@jamescash7321]

What if accelerator is part of your code 😢

[@richardmartin4300]

How do I change the code on my transit pickup

[@DragonCarAudioandSecurity]

Hi, ignition on, enter your current code, wait for the two flashes, foot hard on the accelerator (to the floor) and keep it there throughout the procedure. Enter your current code again, the indicator will flash once every 3 seconds, enter your new code (every time you press a button the indicator will flash). once you have entered your new code, just wait couple of seconds, the indicator will flash 3 times, then repeat your new code and the indicator will flash two times. Switch everything off and take your foot off the accelerator. Your code has now changed.

[@richardmartin4300]

@@DragonCarAudioandSecurity that's the trouble I don't no the code it's just handbrake and throttle