He was a kid when he started making videos . Glad that he talked his brother into getting on board with him . Bet anything that he never knew how big it would soon get. Great videos guys.
did you put anything on the axle before the rotor like a metal spacer or anything? when i put the rotor on its causing a squeaking noise between the rotor and rubber bearing seal
Back in the day me and my bro found out it was easy to learn how to ride our quads on the side two wheels. All it took was 2 weeks practicing that and it ruined the bearings that fast in the 660. Then from not noticing the axle play soon enough it caused a whole shit load of rear end damage.
How’d the axle hold up. Is it good? I need an axle and hubs and needed to know if the one you got is durable. Please message me back it would be highly appreciated
Drill out and tap the carrier for a zerk fitting so you can grease the bearings. Which means you have to take the inside plastic cover off of each bearing to accept grease.
umm you didn't change the bearing dude you changed the entire carrier. that's like $100 when you could have just changed the actual bearing for $20. if I changed out an entire carrier every time my bearing blew I would be broke. all you have to do was take a big extension and a big socket in the carrier and tap the bearing top then bottom until it came out then lube them and tap them in with a rubber mallet. just trying to save ya some money
+Seymour700 And I'm happy for you, but the truth is I'm not worried about that because i already sold that quad to a satisfied customer, flipped a profit and I'm on to the next one.
He was a kid when he started making videos . Glad that he talked his brother into getting on board with him . Bet anything that he never knew how big it would soon get. Great videos guys.
Who just found this vid in 2020, never knew you guys worked on quads
Hence where their name came from: goons on quads. Goonzquad
In 3 years you did some serious growing ‘bout your vlogs... 👍🏽
I kept clicking on the goonsquad like no way this is goonsquad, you guys vlog like pro's now keep it up 👌
I looking your 1st videos.
this videos was great sir.
i am like this videos
Been following goons for a while and just found this video working on my quad! Good work boys thank you
I love the content. Even from 5 or so years ago.
Dang son!! Just found this video.. love u guys!!
Love raptors especially the model they had ❤️
Everyone is a master technician! Good video, had no idea what was involved to r&r that hog.
Daaang son that's legit rite dar!
Look where it all started
What do you recommend I do when the rotor hub won’t slide out ? Like in 4:17
did you put anything on the axle before the rotor like a metal spacer or anything? when i put the rotor on its causing a squeaking noise between the rotor and rubber bearing seal
Thanks for the video.
very well done video
i think you can twist the axle, like there were an thread inside axle joint, they wont create some thing that cannot change able parts
Ah the early days..
Back in the day me and my bro found out it was easy to learn how to ride our quads on the side two wheels. All it took was 2 weeks practicing that and it ruined the bearings that fast in the 660. Then from not noticing the axle play soon enough it caused a whole shit load of rear end damage.
You're full of sh☆it I ride side wheelies all the time with no damage to the bearings
I wanted to see the axle get aligned
Kind of did it backwards supposed to loosen that stuff up with the tires and chain on
The axle was welded because either: 1. the axle nut was stripped OR the person lacked the tools to remove the wheel properly.
How do you like the tusk axle? thinking about buying one since they're cheap....i just hope the quality aint
Definitely would recommend a tusk axle, great price and high quality. No need to over-spend
cool, where did you buy yours from?
racequad9 ebay, mine was and extended axle so it was a little more than the price of the stock axle but can't complain for $200
Are all the axels the same? Or does it have to be exactly for a Yamaha raptor
the thing that holds the brake rotor is extremely stuck what should i do?? i tried heat and what not. need more ideas.
If you left the chain on you wouldn't have to possibly bend your sproket. Also it's a 50mm wrench for the rear. Like $20 at harbor freight.
Part of being an at home mechanic is making due with what you have
How’d the axle hold up. Is it good? I need an axle and hubs and needed to know if the one you got is durable. Please message me back it would be highly appreciated
Hey what is the name of that axle and what site did you order it from
Where did you get your rear axle
Where did you get your new carrier bearing at
billy greens butthole machines
Drill out and tap the carrier for a zerk fitting so you can grease the bearings. Which means you have to take the inside plastic cover off of each bearing to accept grease.
Oh ahit 8 didn't even know this was a goon squad video lmao old af
❤❤❤❤
Just not the same without Thomas
ObiJuan Kenobi I agree
make v tuned pull that... duuuuude that's legit!
How's your day?
👏🏽👏🏽👏🏽👏🏽👏🏽👍👍👍👍🇯🇲🇯🇲🇯🇲🇯🇲
umm you didn't change the bearing dude you changed the entire carrier. that's like $100 when you could have just changed the actual bearing for $20. if I changed out an entire carrier every time my bearing blew I would be broke. all you have to do was take a big extension and a big socket in the carrier and tap the bearing top then bottom until it came out then lube them and tap them in with a rubber mallet. just trying to save ya some money
You need someone to hold ur camera. 1 handed mechanic work i hard on the eyes
THOMAS :D
Hey Seymour tell your girlfriend I didn't like the way she shaved her back in a landing strip...
john Stinglette 😂
Where’s the Dude-Legit
Yall should do fix up some sport quads now that yall pros on rebuilding!
Seymour700 is playing possum.
he ain't shcared of me
Bro. Why TF is my rear right tire on backwards..... the hub is on backwards and won’t come off
my beast would smoke that piece of rusted shit anyday bud
+Seymour700 And I'm happy for you, but the truth is I'm not worried about that because i already sold that quad to a satisfied customer, flipped a profit and I'm on to the next one.
+Seymour700 Too bad I don't see any videos of it on your channel, clearly means its a "beast".
Oh yeah just cut it smart dude
it was welded lol only way to get it off
Stop using pry bars, get a nice small C-clamp, also put new bearings, why you buy a tusk axle, kinda generic..