Oh, I read this case before. I think the guy actually did something to his upper part that lead to explode. Anyway, there thousand of gun but only 1 case of explode. It should be fine.
If a PCP air gun blew up i wouldn't like to be in the vicinity of said weapon!I alway thought that they had a safety valve but i suppose that that could fail.
Eduard debunked this issue, he even shot at a L2 buttstock filled to 300 bar. You can find that video somewhere on the Edgun channel. (I can't post links because YT will erase the post) But still I know the feeling you have . . . everytime when I pick up the gun there's that moment you know hahahaha. . . By the way, I never filled my L2 .30 over 220 bar and I owned it for over 2 years now. I have the reg set at 180 and after 3 mags I fill it back up to 225-ish. The weak point "according the internet" is in the top tube near the threads, the radius inside is too sharp, atleast that's the story, but like I sayd, Eduard is absolutely debunking that. When you think about it, every airgun is a potential bomb, especially the ones with a bottle buttstock like the Airforce, Evanix Rex, AGN Vixen, some AEA's etc. But hundreds of milions of pcp's are sold world wide. The airgun realm has a 3.5 billion market cap. This industry cannot allow pcp's exploding all over the place. And then . . . . there is a thing called "Russia bad". We heard that narrative for years now, for all we know it's some idiot trying to harm the company because he hates Russia . . . just thinking out loud ;-)
All valid point especially the “Russia bad” one lol. I get it! Probably some lefty! I came to the same conclusions as you in the end. Hey thanks for watching and commenting! 🫡
My huben k1 goes to 5000 psi. I hope that doesn't blow up 😂. I personally wouldn't worry about it. I think your gun is fine. There are thousands and thousands of happy customers and one bad experience for one customer.
I reckon that’s true and I’ve thought about that. It could be a one off. But man I’ve shot it a few times since I’ve read this this morning and the pucker factor has went up. Lol Thanks for commenting! 🫡
Wasn't this in 2023? I've not heard of any additional incidents and the fact the fun was shipped from Spain into the UK and assembled by the user does raise serious questions.
hello . i don`t if someone mentioned it , but a litlle oil or grease can start the explosion, not much is needed ,there is 3 times more energy in oil then nitropowder . use only 100 procent silicon oil or grease. in hp air
@@Reviewbuddy296 if some oil gets in the transferport its not impossible ,but that happens in the barrel. and is not as bad as in the cilinder with a filling, . springers can diesel also . a diesel engine has a compression of 30 bar or so . and that heat is the start of the combustion
Few times I filled it up to 315 bar bye mistake it sat around for week with no issues. Wonder is the issue with L2 or older models is this one time one person please keep us updated. Thank You
Oh, I read this case before. I think the guy actually did something to his upper part that lead to explode. Anyway, there thousand of gun but only 1 case of explode. It should be fine.
PCP các bạn nên thay thế bình nén bằng titan. Ở Việt Nam chúng tôi làm như vậy để đảm bảo an toàn
If a PCP air gun blew up i wouldn't like to be in the vicinity of said weapon!I alway thought that they had a safety valve but i suppose that that could fail.
Eduard debunked this issue, he even shot at a L2 buttstock filled to 300 bar. You can find that video somewhere on the Edgun channel. (I can't post links because YT will erase the post) But still I know the feeling you have . . . everytime when I pick up the gun there's that moment you know hahahaha. . . By the way, I never filled my L2 .30 over 220 bar and I owned it for over 2 years now. I have the reg set at 180 and after 3 mags I fill it back up to 225-ish.
The weak point "according the internet" is in the top tube near the threads, the radius inside is too sharp, atleast that's the story, but like I sayd, Eduard is absolutely debunking that.
When you think about it, every airgun is a potential bomb, especially the ones with a bottle buttstock like the Airforce, Evanix Rex, AGN Vixen, some AEA's etc. But hundreds of milions of pcp's are sold world wide. The airgun realm has a 3.5 billion market cap. This industry cannot allow pcp's exploding all over the place. And then . . . . there is a thing called "Russia bad". We heard that narrative for years now, for all we know it's some idiot trying to harm the company because he hates Russia . . . just thinking out loud ;-)
All valid point especially the “Russia bad” one lol. I get it! Probably some lefty! I came to the same conclusions as you in the end. Hey thanks for watching and commenting! 🫡
Trường hợp này ,đó van,chan áp,sang khoang áp, quá lớn, nó ko chịu đc áp xuất cao, lên thay khoang áp xả này, là Titan, để đc ăn toàn,
Thanks very much!
My huben k1 goes to 5000 psi. I hope that doesn't blow up 😂. I personally wouldn't worry about it. I think your gun is fine. There are thousands and thousands of happy customers and one bad experience for one customer.
I reckon that’s true and I’ve thought about that. It could be a one off. But man I’ve shot it a few times since I’ve read this this morning and the pucker factor has went up. Lol
Thanks for commenting! 🫡
Wasn't this in 2023? I've not heard of any additional incidents and the fact the fun was shipped from Spain into the UK and assembled by the user does raise serious questions.
I agree it was suspicious.
Wow that's actually pretty scary especially since it is a pricey gun. Thanks for the info my man
Dude you are telling me! I was shocked when I saw it.
Thanks bro be safe.
hello . i don`t if someone mentioned it , but a litlle oil or grease can start the explosion, not much is needed
,there is 3 times more energy in oil then nitropowder . use only 100 procent silicon oil or grease. in hp air
Even to clean the barrel?
@@Reviewbuddy296 if some oil gets in the transferport its not impossible ,but that happens in the barrel. and is not as bad as in the cilinder with a filling, . springers can diesel also . a diesel engine has a compression of 30 bar or so . and that heat is the start of the combustion
Few times I filled it up to 315 bar bye mistake it sat around for week with no issues. Wonder is the issue with L2 or older models is this one time one person please keep us updated. Thank You
You bet. Hey thanks for watching and commenting! 🫡
All was explained at AN with the results of the expertise.
That’s great news! Can you leave a link to that? I’ve been reading a bit more and can’t find it.
@@Reviewbuddy296 I've sent you the link but the comment was deleted as "discrimination contecst". What is going on?!
@TheEDgun I have no idea about that. I have not deleted any comments.
@@TheEDgun I have not deleted or altered anything. I’m not sure why TH-cam would have done that? If you email it to me I’ll read it.
@@Reviewbuddy296 I did
You get lots of haters of the Leshiy
That’s true.
Most of the hate isn't for the rifle. It's for the people in the USA who sell and service it.
Have a cup of coffee before you upload your next video.
Why?