Day 3 2004 Kawasaki Vulcan engine removal
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Welcome to day 3 of this engine remove. In this video we will go though the final stage of the engine removal. I will do my best to go through as much detail as posable. I hope this is helpful and good luck.
"Passenger side...", haha, love it!
Great videos i watch them all on this and there very informative and i will be back and forth while i do mine.
Just 1 think i didn't see and im missing the vac hoses from under the tank so not sure if they just hang down and on the carb ive no hose on the top pipe connector so not sure where that goes?
Great job
.but FYI...u don't have to take that big 36mm..bolt off... got our engine out without removing that.
I removed cover than looked at it and decided to try removal with out removing that nut and it all came out.
Couldn't imagine why that nut needed out...and glad I didn't remove.
But great video thanks for helping us get our bikes fixed.
thanks for the tip and I'm glad the video helped. Stay safe and enjoy being in the wind.
So I’m putting the bike back together and putting the pin back in….I just realized I no longer have the spring…do you know the specific part that I can order
Or by chance what could happen without running the bike without the pin ?
I dont know if the creator is still on her but thanks to your video i was able to do a full engine swap by myself having never touched a bike before. Without your video i would have gotten stuck at the tank😂😂. This video saved my rear thank you🙏!!!
You're welcome, I'm glad the videos helped. I remember what it was like to learn these things before You Tube, I wish it was around then.
Thanks, Bub. There was a thing or two you showed that my Klymer manual was a bit vague about. Mine's a '97, but your video is pretty accurate as far as I can tell.
You're welcome, I'm glad it helped. That's why I made these videos because I had trouble finding information on the bike as wall and same as you my book didn't help much. Thanks for watching and it would help me out if you would consider subscribing so I can do more of these types of videos 👍
Glad it helped!
This was a huge help walking me through removing my engine. I have a leak in the same area as you pointed out on your engine and I'm tired of dealing with it haha.
I'm glad I could help, ride hard or stay home.
Great series of videos.
Do I need to remove the engine to repair the damper cam
It does make the job a lot easier
I need to do valve cover seals on mine, do you think there is room to rock the engine down without disconnecting the driveshaft, just enough to have clearance to remove valve covers, most importantly the rear cover?
Did you ever figure this out?
No way
Merci cette vidéo m'a bien aidé