Thanks for the info !! Wondering. I have to replace shock absorber and spring on the Vectra C. Do I than ned to replace all of this or can I also just replace the shock and spring?
I would change the top mount and bearing etc... as there not expensive... plus its peace of mind... you don't want to just change the shocks and springs... only too find a month or so the bearing has gone.... and have to take it all apart again.... hope this helps...
The middle 19mm nut was tightened all the way down to the end of the thread ... as it has a nylon lock nut... might help too Google and check Haynes manual... hope this helps...
![ไข้ขึ้นเลย! เมื่อแฝดโดนจัดเต็มวัคซีนครบ2เดือน🤒 [cc] แดนแพทตี้ SS2 | EP.54 |](http://i.ytimg.com/vi/z2VHItnyyvY/mqdefault.jpg)
Thanks for the info !! Wondering. I have to replace shock absorber and spring on the Vectra C. Do I than ned to replace all of this or can I also just replace the shock and spring?
I would change the top mount and bearing etc... as there not expensive... plus its peace of mind... you don't want to just change the shocks and springs... only too find a month or so the bearing has gone.... and have to take it all apart again.... hope this helps...
@@darrencarter1227 Thanks. I'll take your advice and do the lot :-)
What was the drop on them springs they far from factory spings to fit without spring clamps
60mm from what I remember...
We're those standard springs or lowered ones?
From what I remember they were 30mm springs...
Hi,
Can you remember how much nm the top mid nut needed?
The middle 19mm nut was tightened all the way down to the end of the thread ... as it has a nylon lock nut... might help too Google and check Haynes manual... hope this helps...