Just remove the trolly rear panel assembly once it will open you can see the gauges unscrew the gauge you want to remove and pull it out.. but before you pulled out you should remove first the hose connected to the gauge and take note do not enter change the hose, you should remove one by one.
Hi Why don't you thoroughly solder the GPU chip?I mean using the standard GBA wave soldering procedure (leaded or lead-free).Re-solder the GPU chip.Because 100 degrees Celsius can't complete
Sometimes if you heated for long time it will damage balls on the chips and you will do a re-balling on the chips, this is for the mean time solution sir because i don't have a back up unit.
@@roysantik I mean the solder beads under the GPU melted.It does not take a long time because BGA soldering has a standard curve and time.Your solution is not a complete repair.I usually don't have spare parts, but I will choose to do a complete repair to determine the final point of failure.
Sir how to remove pressure gauge in wato x 55 pro
Just remove the trolly rear panel assembly once it will open you can see the gauges unscrew the gauge you want to remove and pull it out.. but before you pulled out you should remove first the hose connected to the gauge and take note do not enter change the hose, you should remove one by one.
Hi Why don't you thoroughly solder the GPU chip?I mean using the standard GBA wave soldering procedure (leaded or lead-free).Re-solder the GPU chip.Because 100 degrees Celsius can't complete
Sometimes if you heated for long time it will damage balls on the chips and you will do a re-balling on the chips, this is for the mean time solution sir because i don't have a back up unit.
@@roysantik I mean the solder beads under the GPU melted.It does not take a long time because BGA soldering has a standard curve and time.Your solution is not a complete repair.I usually don't have spare parts, but I will choose to do a complete repair to determine the final point of failure.
?????