Stryker Front Pulley Swap

A video showing how to swap your stock 31 tooth pulley on the Star Stryker to a 30 tooth pulley found on the V-Star 1100. This will lower your gear ratio, making low speed riding, 2-Up riding, and starts easier with less clutch.

[@maniacalmango]

He's explaining it correctly. Less teeth means smaller pulley which in turn gives you more low end torque= Faster acceleration but loss in top speed.

[@maniacalmango]

+Gus Guti It requires more effort if you shift to a bigger front gear. I've replaced my front pulley with a smaller one and have much more torque and lower top speed. Jump on your bicycle and they it and you'll see I'm correct.

[@skwerlee]

Nice video. Going smaller on the front pulley or larger on the rear lowers the final drive ratio which improves low end torque while slightly reducing top speed

[@alnoel3089]

this pully swap use's a 30 tooth pully from a 1300 Vstar part # 3D817651-00-00
some of you where asking now you know, I have done it and it makes a big differance

[@RickGoodman1911]

Alot of 950 riders are doing the exact opposite to get better top end. Going from a 30 tooth to a 31 tooth pulley.

[@Joey.Darkwoods-Studio]

Nice. Was looking into this... but the manual mentions adding loctite to the bolt don't they?

[@robertdepczynski6192]

i need your 31t pulley..lol

[@xarrow81]

What I want to know, is it worth it?
Its been a year, whats up

[@FrancoSattamini]

Hey man, the video is nice, but . . .
I believe your thinking as far as the effect of the smaller pulley is opposite of what you are trying to achieve.
The larger the pulley, more belt pull will happen with 1 full turn of the engine shaft, hence more torque (I believe you said more low end torque in the video).
It is the same as shifting a bicycle.
Did I understand you wrong as far as what you were trying to achieve?
Peace!

[@tylere1195]

Could you post a video on the proper alignment

[@tms372]

Where did you get the pulley? The yamaha dealer said there not available.

[@alnoel3089]

this pully swap use's a 30 tooth pully from a 1300 Vstar part # 3D817651-00-00

[@paultheage-lonerider]

It could be good the Bolt 950 pulley???

[@530powerstroke]

Do you still have the 31t? Do you want to sell it?

[@Group_Anonymous]

Did you crash your bike

[@bigpowerhouse11]

What is the size of the nut on the front pulley?!

[@michaelreilly3933]

has any one found where to find a 31 " front pulley ?? I have a 2009 950 v star

[@jesseberg6183]

i have one if u still want

[@ryanamy1129]

@@jesseberg6183 still have the 31t? What's it from?

[@Lordbaccus]

this entire VIDEO is OUT OF FOCUS =/

[@MrMmari]

Hi - good job.
How many teeth does the pulley you use have?
I want to put another smaller pulley with fewer teeth (the original is 30 teeth), could anyone advise where to buy?
The original transfer is too long.
Thank you

[@robertdepczynski6192]

i need your 31t pulley..lol