RC Jeep tries to tow a real Jeep
ฝัง
- เผยแพร่เมื่อ 21 ก.พ. 2022
- 🎥My LIVE Stream Channel - / @kevintalbotrc
Get RC Jeep Here -
Treal Parts - trealhobby.com/collections/scx6
GPM Parts - www.gpmparts.com/axial-racing...
🎓eBay Secrets - 11 steps to being your own boss kevtalbot.clickfunnels.com/sq...
Get Your Merch Here teespring.com/stores/kevs-merch
🧡My instagram / talbotkev
💙My Facebook page / kevintalbotvideos
💡Check out my Business Channel: / @kevtalbot5356
🎥My LIVE Stream Channel - / @kevintalbotrc
🚗Kev's RC Basher School - kevin-talbot.teachable.com/p/...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, insurance and many other topics.
#Kevintalbot #rccars #rc
The best part about about Kevs videos is, that I can enjoy the utter carnage without paying for the spare parts or wrenching for hours to fix the toys. Yay!
So true lol
Ah a
You are kiddingg
Non member
The Jeep going crazy on its own had me literally in tears. So funny. I’ve had that happen at a rock crawler event. Always my car !!lol
This happened to me while fiddling on my RC planes. I've had two of them on my workbech. A styrofoam one in the front and a really powerful, wooden one in the back. Guess what: The ESC of the back one went to full throttle, shredding the tail of the plane in the front. Styrofoam snowstorm in my workshop...
Had it with an ESC shorting out once. Truck shot off across the living room at full speed and you could see all the electrical arcing through the ESC casing and then smoke. Never disconnected a battery so quickly. Smell hung around for ages.
Very entertaining. "What?!? This is stuuupid!" Hahahaa
ITS A DEFENDER NOT A JEEP
3:40 One of my biggest lessons in rc was making deliberate weakpoints. I spend ages changing parts that were hard to get to, trying to make cars indestructable... Instead having deliberate weakpoints with cheap easily changed parts is optimal, then you just keep a couple spares and life is good!
With cheap parts it would more likely to break under intense abuse, like hitting, pulling(real car lol), falling from 10m of height
That's just my assumption
I'm not into that stuff even a slightest
The RC cars i once had as a kid are child's play compared to this
@@narrativeless404 my biggest and fastest car wheighs 6,5 kilograms and has a topspeed of more than 120 km/hr...
-Nomatter if I buy the most expensive parts on the market she will desintigrate if I crash her at full speed... 😆
@@JokerInk-CustomBuilds Yeah, but it's not as powerful as this one i assume
Cuz the higher the speed, the lower the torque
But yeah, it'd get destroyed, not fatally(like a real car at the same speed), but still
Anybody else want to see the axial scx6 with a body and paint job to match Andy The Landy? Or am I just crazy?🤪 Also get a powerful winch for it as well.
I was thinking that
Yes it would be amazing!!!
Andy the Landy sounds like a kids tv show!
🐕🇹🇰🇸🇸@@owenbristow6147 ب
Bro that would be fire🔥
Kev: carefully checks fitment of new parts, locktites all the screws and tolerances pre drilled holes with a grinding tool.
Also Kev: attempts to fix faulty servo by hitting it with a 3lb hammer
Also Kev: almost rear ends a Land Rover with a Saab and pancakes the SCX6.
Saab where ?? A Peugeot
he sat on the car
Jeremy Clarkson would be proud
Now THAT was impressive... what a brilliant RC!!! Sucks the servo fried and made the car go nuts. At least it was an easy fix. Those Treal upgrades are fantastic.. Quality really shows.
A single nitro Unlimited Engineering Supermaxx w/ OTB transmission gears pulled a real pickup truck like 15 years ago.
Was out on a frozen lake sunday and my buggy decided it was gonna visit a shanty off in the distance... by crashing into the side of it, and just cuttin stud tracks and freakin out the poor guys inside..
Thankfully one grabbed the car and stood there with it till I got close enough for the receiver to realize it's getting no throttle input.. he happily tossed it down and said that he was slightly terrified holding a wide open rc car with screws poking out of the tires.. cant imagine why he freaked out..
Hell of a fishing story to tell his friends though..
Sorry Kev. The car out of control cracked me up 😂
Watching Kevs crawling videos ALWAYS makes me feel incredibly grateful to live in Utah. Amazing RC crawling locations all over the place
It makes me sad I don't live in Lake Tahoe anymore, amazing stuff there too.
Would loved to see what the car weighed before and after mods. Maybe something you can include in the future? Awesome vid as always!
Anyway i remember something nostalgia with they long video
From what I've read 📚
Even though the random acceleration and the motor not working right was fake it was still funny as hell
I can't afford a decent RC car, but I thoroughly enjoy watching you play with your toys, good stuff Kev
Yes, you can, just save for it.
I have just saved for a big rock it comes Friday can't wait to send it
Kev. As a precision machinist myself. I appreciate how much you can appreciate a quality machined piece. Lots of work can go into these things making them perfect & pretty. Love your vids!!
yeah, that’s a solid hammer
He was talking about the axles being machined from a block of aluminum lol
Meanwhile Andy the Landy is wondering when hes gonna get some of those shiny new bits! Bless him.
Id love to see the unedited CCTV from your workshop while you are filming your videos Kev...That would be beyond hilarious i just know it! You being chased around the unit by a bodiless rogue RC Jeep?! 😂😂😂😂 would be gold mate 👌
I love Kevs content it hooks you and it’s fun seeing the experiments he has!
Hi from V&b Speed a new rc community channel..looking 4 new subscribers thank u
I love how Kev's idea of a few upgrades is a whole box full of goodies. 😍
He’s probably got more stuff in his shed than most shops 😜
Johnny Hand hatte die Idee es ist geklaut
ist aber auch keine idee, die man sich in harter arbeit ausdenkt
Teri buri saikal
Wait, whats your idea of a few upgrades then?
It's so much fun to watch Kevin Talbot's projects. Because it shows me what I can't do!!! I never thought that I would be able to pull a real car with the SCX6. awesome!!!👍👍👍👍
You can see your finger hit the trigger when it “ran off the workbench on its own” also can’t you just elevate the wheels when you test it😂
I love when you upload it always makes my day! Thanks for putting a smile on my face every time you upload.
No way 😆 it really pulled a Peugoet 👊🤣🤣🤣 and Andy the Landy. No way would I imagine that would happen dude. Awesomeness 👍
haha, andy surprised us!!
Hey Kevin! 👋 Just want you to know that I have been a fan for years, but I think it's the 1st time I have actually posted a comment. YOUR ENTHUSIASM AND EXPERTISE IN EVERYTHING RC IS TOTALLY REMARKABLE!!! Keep it up and stay safe!!! JP
Now it's a 4000.00 scx6 lol 🤘😆
Aftermarket servo sales are on fleek!!
I don't know what's faster your RC car or how fast I click your videos😁😁 Kevin is the Rc god. He says to build stuff that makes you happy with everything he bills makes me happy
I love the idea of keeping the plastic ball links on one end to have a weak point. That's smart. I'm going to do that to mine. Thanks, Kev. Always learn something new from your channel. The carnage is a bonus, lol.
Way back in middle school I had a nitro tmaxx as my first real hobby car. Back then nitro was the only way to go since NiMH batteries had no power and only lasted about 10min. I sold it and got a slash 2wd in highschool (10 years ago) with two 2s lipos. That car ran great till I sold it a few days ago and bought an Arrma Typhon 3s. The amount that electric RC tech has evolved is astonishing. I'm running it with a 8000mah 100c 3s lipo and drove it hard for over half an hour yesterday on a single battery. Best part is, the battery wasn't even close to being drained, it just started raining so I headed home. Idk why I'm saying all this but this channel just got me nostalgic
Dam servo 🤣 went nuts 🤣
Good job you got plenty of spares kev. Thought it would pull the pug, but pulling Andy off 😳🤣👌 priceless 👌
12:59 the car got so angry over you hitting it that it put a hole in your wall 😂
You should always start bolts by hand before using the acadaca. Kills me everytime you do it haha
10:10 atarting on this part is the most strangest thing kev have noticed over his whole entire rc career hahaha
My younger brother couldn't believe that you actually did it!🤣
INSANE!!
That is definitely the most trouble I've ever seen you have with an RC but persistence always prevails keep up the good work and the excellent content Kev.
it was a joke. You can see him pulling the trigger or poorly hiding the controller. It was all for fun.
So bigger than TRX4 but no where near as durable
Also twice the size with same ground clearance
You can see some metal flakes when you took off the servo horn. You probably stripped it. That’s why it wasn’t working
I love the wordings of Kevin " absolutely epic!"
That video was the funniest, best one I’ve seen so far. You have inspired me immensely. I’m selling on eBay and am having success so far. Thank you, Brother. From Chris in Virginia USA
Thanks bro, and good luck on the bay!!
@@KevinTalbotTV hi
Among us
Thought you might’ve needed to go get that car an exorcism there for a minute!🤣🤣🤣🤣 I’m so impressed with how it was able to pull both of those cars! Probably scared the shite out of it with that bloody big hammer🤣🤣🤣🤣🤣🤣
"Poor raminators got it!"
That's somthing I never thought I'd hear!
High tow point and low pull point is making it bounce, level tow rope should stop the bouncing.
I think.
Kev - “I have a little bit of parts here.”
Continues to replace 70% of the parts on the rc car
Kev says “a few upgrades” and then proceeds to take out a whole kit of parts, almost enough to build a new rc car 😆
I must say that was pretty funny with the out of control crawler!
I think your unique energy just really sells it man. This content is top shelf, for sure. I don't know how you keep going with all this stuff. I can barely keep a single quadcopter airborne. Lol.
I GOTTA SAY Treal upgrades do actually look proper quality. Like really nicely machined parts, even look like the real thing. Well i suppose they ARE the real thing! I mean they are real metal mini axles that go on a truck to make it perform better. And look flippin cool on the fourbi. Is nice
Hopefully they make a portal kit for those axles. I have one too and since i saw how nice those axles are, im gonna order some. It almost reminds me of dealing with a crazy puppy that thing, hahahahaha
I was impressed but I also think it possessed! I had some same problems with my rc thought it was my receiver and transmitter got a new one worked good for a little and know my esc beeps and goes nuts. Great video.
Man I was crying how many times it fell of tile Kevin you are hilarious my good friend
I love it when Kev gets ‘the rage’ 😂
I don’t know much about rc cars, but wouldn’t using steel parts be better for axels and such? They’re stronger and more heavy so the center of gravity would be lower making them more stable?
Lower weight is good but too much weight can make it struggle to go up and over some obstacles. Lowering your center of balance is great, but if you add a lot more weight, you gotta add power to compensate a lot of times.
Your videos are getting better & better. The best RC Channel.
Could you make that dual motor somehow? And would it make it rock crawl better? It would make it bash though right? Id love to see that thing blasting over some woodland at a rapid rate, ohhh yes indeedy!!! Wicked wrench action matey 🔧 🛠
Oh, this is going to be absolutely epic!
Yessir
That’s what u said lol
My spectrum servo lasted exactly one hard landing. Easier than that one. Stripped right out.
I’m about sick of spectrum in everything. There’s actually nothing spectrum made that I would prefer in another brand 😂
*that I wouldn’t prefer in another brand
holy crap I didnt know GPM racing was still around. I bought stuff 10 years ago for an ANCIENT nitro RS4 that was discontinued since 1990s. Very cool to see them still kicking!!!!
The hammering in of the bearing 😂 Kev press them in... Even a small C-Clamp can help..... But you do you still like your channel 👍👍
I am surprised you didn’t two front axles and made it rear steering like I have seen you do on other models you have.
AWESOME mods Kev!!!! Those wheels are going to look sick!!!🤘🤘🤘
The constant repairs is amazing, so genuine, I love it 🤙
That's such an amazing pull. The SCX pulling his SUV with Kevin sitting on it is impressive.
Leave it to Kev to always do what you should never do to your RC'S
hi kev great vid as always, may i request a quick vid on more of the the Wltoys 284131 please please :)
By far my favorite video you’ve put out. because everything went wrong just like it always does for me! SNAP!!
Awesome! I had the same problem with those gpm parts, got some spools for my jump car and the screw wouldn’t line up with the other hole and the threads just stripped and the pin got all mashed up
Kev, where did you get those hex drivers from?
Peki dawr babutlang ch. Chhunga truck terminal chhawng hnih na ah luh kek kek na ah luh in a lo awm mai ang
Hey Kev. You should definitely try out the T-Maxx classic. I have a 2003 T-Maxx. The original one. Then they stopped making them. Then they started making them again. Different Transmitter tho. I made videos of our 2003 T-Maxx because we are trying to restore it. It’s been sitting in a garage at my cousins house for like years collecting dust. But we got it running. Well kinda. But when I did get it to run properly. It runs really really great. 3.3 nitro motor. And I think it’s a great basher. Prove me wrong. You should definitely get one. They are quite fun when running properly.
Love these videos were you fix your car or upgrade Them, and then go for a drive 👍💪👌
1) You should probably just buy shares in Treal at this point. (nice gear though)
2) That issue with the truck going everywhere took me back to the first time I ever tried to run my Hornet. Hilarious!
Kev is like the mrbeast of rc, and he uploads a ton!
Kev: has a lot of knowledge about rc cars also Kev: turns in to cave man and uses hammer
🤣🤣🤣🤣🤣 that wrenching session was an absolute circus fire! 🤣🤣🤣🤣
Actually purchased one of these a week ago after watching this. Such a great crawler.
I love watching you have so much fun with some of the best toys on EARTH!!! Great video!
Boom! A ton of $. Boom !! Seriously I love your videos. Great job. Love your excitement for the hobby !!
Kev! That Axial is literally mental!!!
The technical difficulties are killing me I have water coming out of my eyes 🤣🤣🤣🤣🤣🤣🤣🤣
Lol got to love runaways they can be so funny 😂 😂 but scary too, that hammer should have definitely fixed it though..
Omg! Laughed so hard when the car went ghost mode! Great videos Kevin!
Word on the street from a pretty reliable source is that Treal really doesn’t use 7075, and if you would have went Vitavon, you would have had portals, but I guess it’s nice to see something else. Why don’t you ever give Vitavon a shot? I stopped using Treal and GPM a long time ago because of their fit and finish, than and compared to its on their parts just feel cheap.
Great hop up parts. I'm thinking the wheels, and foams for me are the first upgrade. I'm holding out for a 1/6th scale Gladiator!
I wanna defender Kev but hotwheels ones are hard to find in rural towns in Australia
Loved it when it drove off on its own in the workshop. My first brushless rc did that in the living room and did a burnout on the carpet!
14:00 jezzus the amount of times “that’s what she said” could have came outta my mouth is crazy 🤣
Rc car be like: I don’t need a controller I drive on my own
Me: has not laughed this much every time it randomly drives
I lost it when the car went full speed off the bench into the wall🤣😂
My 8s 3BrothersRC motor due in soon! I’ll run in a mamba monster x. Can’t wait!!
I just have the Treal shock towers on it so far. Mainly just for the panhard (tracbar 🙄) mount.
Wonder what will get destroyed first? Lol
That "What the Hell" had me dying 🤣 11:13
Omg when the truck started driving of your desk by itself I laughed so hard😂😂
Was that really not staged when it drove itself off the workbench the first time? Absolutely hilarious either way!
Much love and respect for you Kevin, all the way from Arizona
Oof! That's a real kick in the nuts for your Rover calling it a Jeep. Lol!
Never seen a bearing press such as that, a hammer? Hope bearings aren't damaged from that delicate install.😂
Absolutely amazing. This is the first time I've seen an RC car tow an actual car.
Can I just take a second to say how absolutely stunning that land rover is!
Yeah, Jeep is so big that every off road looking car, mostly when it has a military color, is called a Jeep by people but yeah its a land rover defender this time.
Good thing it had all the upgrades before it went all apeshit. 🤣 Thanks for the laugh!
Kev "So here we have a few upgrades!" Tips out a box with trillions of upgrades 😂😂
I think it would have easily pulled it, if it had been anchored lower down on the Land rovers axle instead. I can't believe it took your weight on top of it and still moved at all. Good video! 😉
Put a defender body on the scx6 it would look absolutely epic!
Best rc car videos on the whole internet
Pulling the real car, eh, seen that.
But the comedy part was gold😁👍