I like your videos a lot bc I'm looking at getting one of these. Looks like a nice setup and I'm not a big drone pilot. I just like this model and your videos.
Hi Lee, Steve here it’s been a little while still watching all of your videos. They’re always so good Lee I got a couple questions if you don’t mind one is going to be about the. Heewing t1 vtol, when mounting the GPS ( matek m8Q 5883 ) does the arrow need to be pointing in the same direction as the flight controller? ( matek f405 vtol ). In my case, I mounted the flight controller the same way you did, and just reversed it in mission planner but if I’m not mistaken, I think you might have the GPS facing the same direction as. Fc, second question in regards to.ZMO pro. And what was your final outcome as far as installing the pitot tube I think the last video I saw of you with this boy she was going to go back to the original set up that they provide and try that I was told it works if there’s no wind at all I was just wondering what your thoughts were on that and what did you end up doing with yours? Thanks so much Steve and continue. Looking forward to watching more of your videos. Believe me they’re so helpful. Thanks again Steve.
In the software you can tell it you've rotated the FC and Compass. If you install the FC rotated, I'd still install the compass the right way. One less thing to fix in the software... Happy flying
Could you possibly add a link to the reference guide? I have been able to find only the quick start guide which is no help at all. Thank you for all you do for the hobby!
Hello, I can't find the latest parameters,I will appreciate if you please indicate me where are they, there is a update firmware in omp webpage but is a .apj FIL. Thanks for your help
I have both O3 and RC2, but my current setup is to use O3 only for FPV and another ELRS receiver/transmitter for control. I will check how to use DJI O3/RC for control and let you know.
Just make sure you upgrade the DJI O3 air unit and the DJI remote controller 2 to the latest firmware then you can bind both the controller and the goggles 2 to the O3 HD system.
Fantastic, Lee! Thanks for the tutorial! 😃
That's a fantastic model indeed! Looking forward to the flight video!
Stay safe there with your family! 🖖😊
Thank you so much for the video. This is very helpful in setting up the VTOL with TBS Crossfire and the DJI O3 Air unit.
Really useful video. Thanks for making this
I like your videos a lot bc I'm looking at getting one of these. Looks like a nice setup and I'm not a big drone pilot. I just like this model and your videos.
WoW ! I can't wait to see it flying. Thanks again for the information
Hi Lee, Steve here it’s been a little while still watching all of your videos. They’re always so good Lee I got a couple questions if you don’t mind one is going to be about the. Heewing t1 vtol, when mounting the GPS ( matek m8Q 5883 ) does the arrow need to be pointing in the same direction as the flight controller? ( matek f405 vtol ). In my case, I mounted the flight controller the same way you did, and just reversed it in mission planner but if I’m not mistaken, I think you might have the GPS facing the same direction as. Fc, second question in regards to.ZMO pro. And what was your final outcome as far as installing the pitot tube I think the last video I saw of you with this boy she was going to go back to the original set up that they provide and try that I was told it works if there’s no wind at all I was just wondering what your thoughts were on that and what did you end up doing with yours? Thanks so much Steve and continue. Looking forward to watching more of your videos. Believe me they’re so helpful. Thanks again Steve.
In the software you can tell it you've rotated the FC and Compass. If you install the FC rotated, I'd still install the compass the right way. One less thing to fix in the software... Happy flying
@@Painless360 thanks Lee that’s what we’ll do
Could you possibly add a link to the reference guide? I have been able to find only the quick start guide which is no help at all. Thank you for all you do for the hobby!
www.dropbox.com/sh/nh2hqzrqbbdznqs/AACzfrecOKr_Ow_YWELThkcLa s what I have here. Not sure why this details isn't on their website..
@@Painless360 Thank you so much. I wondered the same thing myself.
@@icemanf6417 Had the same question. Where did you source the QR PDF Guide from Painless? Thanks for posting it up.
Wish I had this video guide when I was setting up my ZMO Pro 2 months ago 😭😭😭
Thanks for the comment. I'm pleased that they added this detail to the manual. The first version left a lot of key information out... Happy flying
Hello, I can't find the latest parameters,I will appreciate if you please indicate me where are they, there is a update firmware in omp webpage but is a .apj FIL. Thanks for your help
Could someone please link the updated manual. My ZMO Pro did not come with any manual at all.
Cool, do you have a video of it flying?
Mine crashed on first flight due to a servo failing. Still trying to get it airworthy again..
@@Painless360 ah, bummer. Omp didnt get you a new one for this?
We've been trying to repair it... Stay tuned
How do I setup DJI 03 air unit with the remote controller 2?
I don't have one here to try. Best of luck
I have both O3 and RC2, but my current setup is to use O3 only for FPV and another ELRS receiver/transmitter for control. I will check how to use DJI O3/RC for control and let you know.
They released a firmware update on the 21st April that addressed that. I'm trying to find out where they posted it so I can share a link..
Just make sure you upgrade the DJI O3 air unit and the DJI remote controller 2 to the latest firmware then you can bind both the controller and the goggles 2 to the O3 HD system.
Wow, great video Lee 😊. Is there already a firmware update around?
See my post on the community page from yesterday. I have it here, not sure how public it is yet..
@@Painless360 they did post on Facebook. Will you do video on how to update it? Im not good at ardupilot
IDone, Check the playlist... best of luck
@@Painless360 That’s good news 😊. I’ll wait till you finished testing with the maiden of mine (arrival is scheduled for mid of May)
I wish I could fly this with DJI PRO controller. Do you guys think it is possible?
I'd think so, if you have an Air Unit in the model it'll bind to... Happy flying
where is the flying video? (Great video series by the way)
See note in description... Happy flying
@@Painless360 omg... After all that work too..
Yep. Gutted.