To make a RELATIONSHIP, Don't forget to press the subscribe button with bell icon to get the latest notifications. My channel :) th-cam.com/channels/w9kSuR1bTFBmaMEyD_DXvQ.html
Thank you for your work. One inquiry I would like to put about stiffness modification factors for slab you took in this exercise. I mean when we check the option non-linear cracked for immediate cracked deflection , what value the software picks ?? Or stiffness modification factor is 1
Mr hussein you used the 7500mm distance. For flat slab with perimeter beam but without internal beam what distance to be used? Most specially when the distribution of columns is not in line due to arch considerations....
Why you used the same Load case om both immediate and long term deflection? For L/360 is immediate deflection due to Live Load only. Correct me pls. If im wrong.... 🤟
when you imported model in safe from etabs/sap, were the stiffness modifier already added in them? I mean if i have assigned modifiers in my etabs model and then i import it in safe, will the stiffness modifiers also be imported. Do I have to remove then to get elastic deflection?, and reassign them for longterm deflections?
You are importing a floor and not the whole model from Etabs, for the purpose of carrying out a design for this specific floor. I believe that, since Safe is calculating the short-term and long-term deflections, taking into account shrinkage and long term creep, you do not need to apply stiffness modifiers and therefore set all modifiers to 1.0 for all cases.
Hello brother, I have an issue with CSI safe, so many times , after running the model nothing happens, I mean no result will come up. I am facing this issue so many times Please can you tell me how to solve this problem. Thanks...
@@civilmdc did not work, the issue is not related to the graphics, the issue is the model will not run. this problem is only encountered in SAFE 2016. it is ok in SAFE 2014
Thank you very, Finally I solved the problem by changing the solver, I am using 64bit system, selecting 32 bit solver is completely solved the issue. Thanks again...
To make a RELATIONSHIP, Don't forget to press the subscribe button with bell icon to get the latest notifications. My channel :)
th-cam.com/channels/w9kSuR1bTFBmaMEyD_DXvQ.html
Thanks for the video lesson, how can i consider the effect of creep and shrinkage in global analysis
For L/360 is immediate deflection due to Live Load only as ACI code mentioned
its really good session!
For checking long term deflection what is the value of modulus of rupture to be used ?
Very informative video
Thank you for your work. One inquiry I would like to put about stiffness modification factors for slab you took in this exercise. I mean when we check the option non-linear cracked for immediate cracked deflection , what value the software picks ?? Or stiffness modification factor is 1
same question
Mr hussein you used the 7500mm distance. For flat slab with perimeter beam but without internal beam what distance to be used? Most specially when the distribution of columns is not in line due to arch considerations....
Very informative again. Thanks
THANKS Dear,
Sir make a video how to design retaining wall and to apply soil pressure on wall. Sir I also watch your video on udemy
Sir,
can I do the same short and long term analysis in ETABS???
Thank you.
Thanks for the video lesson. Can you tell me the value of the section modifier for the beam elements in this model? thanks
Thank you for making helpful video. Please make a video on edge and corner footing design.
Thanks Dear. Noted your point
Why you used the same Load case om both immediate and long term deflection?
For L/360 is immediate deflection due to Live Load only. Correct me pls. If im wrong.... 🤟
Thank you for your video, but can u tell me how did you chose the load combination? depend on what ??? Thanks again!
These combinations are given on the official website of CSI Knowledge base
@@civilmdc can you send me the link ? So many tag in website 😂😂
@@NHTL2101996 here is the link
wiki.csiamerica.com/display/safe/Cracked-section+analysis
@@civilmdc tks so much 😊
Hi thanks for your greet work,do you have full design project (safe+autocad) in your course ???
when you imported model in safe from etabs/sap, were the stiffness modifier already added in them? I mean if i have assigned modifiers in my etabs model and then i import it in safe, will the stiffness modifiers also be imported. Do I have to remove then to get elastic deflection?, and reassign them for longterm deflections?
You are importing a floor and not the whole model from Etabs, for the purpose of carrying out a design for this specific floor. I believe that, since Safe is calculating the short-term and long-term deflections, taking into account shrinkage and long term creep, you do not need to apply stiffness modifiers and therefore set all modifiers to 1.0 for all cases.
Sir make a video how to assign non uniform shell load on wall and slab
M hussein. When exported file from etabs for the load cases i include loads and load_Above.
Pls correct me if im wrong tnx
Correct
Thank you
Welcome 😇
Hello brother, I have an issue with CSI safe, so many times , after running the model nothing happens, I mean no result will come up.
I am facing this issue so many times
Please can you tell me how to solve this problem.
Thanks...
Go to option.
And change ... To graphics mode... Then It will show ... everything...
@@civilmdc did not work, the issue is not related to the graphics, the issue is the model will not run.
this problem is only encountered in SAFE 2016.
it is ok in SAFE 2014
@@civilengineeringwitharas4776 dear Download SAFE Software from www.civilmdc.com,
It has the lifetime license....
And I am also using that one.
Thank you very, Finally I solved the problem by changing the solver, I am using 64bit system, selecting 32 bit solver is completely solved the issue.
Thanks again...
Spanish subtitles in your videos please