@@peterxinshijiamachinery3635 Thank you for being proud and watching our video. I hope you will follow us and give us energy to produce better and more complete videos. May I ask which country are you from?
@@coil_magnet I come from China, I am a mechanical enthusiast, your video is very good, I like it very much, I hope you can get better and better. Good luck to you
@@MortezaRahmanisari سلام وقت بخیر اون رنگ رو میزنیم بعد یاتاقان رو روی شقت میچرخونیم تا ببینیم همه ی سطح یاتاقان به شکل یکنواخت با شفت درگیر هست یا نه
En la descripción hay muchos datos técnicos. Y es fenomenal. Lo que falta es decir el lugar aproximado del taller. Y felicitar al equipo de operarios y de filmación. Por cierto, saludos para el ayudante de la camiseta negra. También lleva mi escudo en su hombro derecho. Gracias.
Hola querido amigo, es un honor que nos sigas. Gracias por su mensaje alentador. Nuestro taller está dentro de Irán. Y mi hijo es un fanático del Real Madrid.
They should not be dragging the rotor through the stator in this manner. The paint damage will result in chips inside the gap, which is only about 1-to-2-mm. In later use, the remnant paint will start peeling, from the aerodynamic forces, and will cause more and more damage. This results in fast motor failure, not as intended, and possibly a scam job, similar to the car-engine rebuilds.
Hello, dear friend, thank you for following us and leaving comments for us. Unfortunately, we do not have the facilities to test and power this electric motor in our own workshop, but somehow this will be achieved.
The alignment process of centering the shaft is totally bogus.... it presuposses that the paint job on the armature and stator are uniform within what ever thickness the shim that they are using is.Otherwise fun to watch, love the precise dusting done, at least they are using quality bearings.
не ну они молодцы, хотя бы ни как индусы и пакистанцы, одетые, не в шлепках. Инструмент есть, но к сожалению без молотка и кувалды при забивании подшипников и тут не обходится) ну и без нанесения смазки пальцем то же)
video documento, davvero importante,grazie
that’s right
😮😮😮عجب موتور بزرگ و سنگینی 🤯💪🏼 دمتون گرم وجدانا
@@محمّد-ت8ب5ل اقا محمد عزیز سلام ممنون که وقت گذاشتید و ویدیوی ما رو تماشا کردید و بسیار تشکر بابت پیامتون 🙏🙏🙏
Very professional video sharing, thank you for sharing
@@peterxinshijiamachinery3635 Thank you for being proud and watching our video. I hope you will follow us and give us energy to produce better and more complete videos. May I ask which country are you from?
@@coil_magnet I come from China, I am a mechanical enthusiast, your video is very good, I like it very much, I hope you can get better and better. Good luck to you
سلام ارادت اون ابی رنگ چی بود که همکاریتون روی شفت مالیدن؟
@@MortezaRahmanisari سلام وقت بخیر اون رنگ رو میزنیم بعد یاتاقان رو روی شقت میچرخونیم تا ببینیم همه ی سطح یاتاقان به شکل یکنواخت با شفت درگیر هست یا نه
En la descripción hay muchos datos técnicos. Y es fenomenal.
Lo que falta es decir el lugar aproximado del taller.
Y felicitar al equipo de operarios y de filmación.
Por cierto, saludos para el ayudante de la camiseta negra.
También lleva mi escudo en su hombro derecho.
Gracias.
Hola querido amigo, es un honor que nos sigas. Gracias por su mensaje alentador. Nuestro taller está dentro de Irán. Y mi hijo es un fanático del Real Madrid.
@@coil_magnet Con razón presumía de ésa camiseta. Saludos desde Catalunya.
They should not be dragging the rotor through the stator in this manner. The paint damage will result in chips inside the gap, which is only about 1-to-2-mm. In later use, the remnant paint will start peeling, from the aerodynamic forces, and will cause more and more damage. This results in fast motor failure, not as intended, and possibly a scam job, similar to the car-engine rebuilds.
You are so right. But this is Iran with experienced electricians and engineers - doing their work the Iranian way in an independent Iranian workshop 😉
I Used to pull turbine rotors, we always put a heavy paper on the stator them pulled a pan through, the rotor sad on a shoe
Job security 😅
Please give caption on screen about working activity. Part name and tool name.
@@AryanIndustrial 👍👍👍
Why they have the bearings on the dirt ground
في اي بلـــد توجـــد هذه الورشــــة ؟
في دولة إيران يا أخي
@@coil_magnet شكرا جزيلا
سلام استاد خسته نباشید خیلی عالی عالی بود
سلام ممنون از لطف شما جناب افشار گرامی
Excelente trabalho, mas falta algo - eles não são obrigados a usar capacete de proteção
tanks a lot
No need for a helmet, everyone is professional😊
@@محمّد-ت8ب5ل Tank you so much mr mohammad🙏🙏
Seja qual for o tipo de profissionalismo, não protege contra os maiores perigos
Mr.shakib the God RMF Motors🙂
BISOUS BONJOUR DE LA FRANCE BIENVENUE JAI ADORER JADORE CONTINUER MERCI A BIENTOT
من اي بلد مصنعكم
iran
@@coil_magnet
عمل رائع جدا انا من متابعيكم اتمنى لكم كل التوفيق
مرحبا، يشرفني أنك من متابعينا، أتمنى أن ننال رضاك. هل يمكنك أن تخبرني من أي بلد أنت؟
In this video very useful information has been given. Thks for it.
Thank you for following us, your encouraging messages give us energy to try to produce better videos
Why can't we see the engine being tested?
Hello, dear friend, thank you for following us and leaving comments for us. Unfortunately, we do not have the facilities to test and power this electric motor in our own workshop, but somehow this will be achieved.
@@coil_magnet Na de test hoef het niet meer open voor herstel werk, die kale weet waarmee hij bezig was!!
Non ci sono cuscinetti....metallo bianco?
👌excellent job💐
Tanks bro
Sería magnífico ver a ese gigante en funcionamiento
That’s great.Thank you so much
Whats the volt in put .
Three phase 380 v.
Or high tension
no 6kv
6000 v
Thank .my dear.
کاش روشنش میکردین ببینیم چجوری کار میکنه
عالی
خدا قوت 👍🏽
ممنون از لطف شما دوست عزیز
Why they are not using Torque wrench?
Muy malo criticar ,esa es la forma de ellos trabajar .aca en Colombia es diferente el procedimiento. Hay que respetar su modo de trabajar
Tanks
Sir is there any job vacancy I know winding 1 phase , 3phase motor, alternator and also AC armature
its' useful video thanks you I share my profile with you.
Tank you so much 🙏🙏
Sois unos genios os envidio
Tank you so much 🙏🙏🙏
Which country are you from?
I am from Iran, my brother, every year of Arbaeen, I come to your country to Karbala
El video es muy útil pero la musiquita es alienante. Hay alguna otra más normalita.
Tank you so much
4500 киловатт😮... это чуть больше 6000л.с.
И где такие электродвигатели используются???
Привет, доброго времени, спасибо, что подписались на нас. Этот электродвигатель используется для вращения мельницы цементного завода.
А на какое напряжение этот двигатель,подозреваю на 6000v.@@coil_magnet
This is my jop in my country. Iraq.
nice to meet you bro
sliding on an oil wedge is a very old and reliable technology
Surely they have better tools than Swiss Army Knives!
🙏🙏🙏
What is in the Coke bottle?
its gas
The name plate must be clear.
yes 👍 lm sorry
Está oficia parece mais um sucatão do um lugar de reparo de motores. Melhore o aspecto de limpeza, ou isso está parecendo oficina de paquistanês.
Dear This group worker is very professional
ไปำ@@roostamdastan
The alignment process of centering the shaft is totally bogus.... it presuposses that the paint job on the armature and stator are uniform within what ever thickness the shim that they are using is.Otherwise fun to watch, love the precise dusting done, at least they are using quality bearings.
Hello, thank you for your comment
Wow
🙏🙏🙏
Die kale weet waarmee hij bezig is.
ولا صلحو شئ. بس براصات العمود
мойки нет у вас что-ль....
@@kol23028. Привет, доброго времени, я не понял, что ты имел в виду
Motor stator and rotor didn't properly clean dust all ready have in rototr inside
I think his KW its 450 not 4500. My be.
My be.
No, dear friend, 4500kw is correct
👏👏👍👍🪛🪛
حسبالي ثقب اسود
Vous travaillez sale😅
More power elbow
Tank you so much 🙏🙏
No proper cleaning, outer washing ,greasing, 3rd class workmanship better equipments but ignorant team,no proper service but free dust removal only.
Aucune explication technique valable, prise de vue souvent très mal faites, une musique de fond vraiment horripilante...dommage !!!
Шайтан производство
не ну они молодцы, хотя бы ни как индусы и пакистанцы, одетые, не в шлепках. Инструмент есть, но к сожалению без молотка и кувалды при забивании подшипников и тут не обходится) ну и без нанесения смазки пальцем то же)
Dirty store ...