Spent hours trying to put my bobin case back and the videos on the topic didn’t help until I found yours. Within moments I was back to sewing a touch cell phone bag with cross body straps. It looks beautiful and I am anticipating my next project. I have vintage sewing machine from Singer and a few antique ones thinking about seing how these work. Your video was great for me. Thank you for posting it.😁
Thank you so much for this easy explanation. I recently had my machine serviced when suddenly the bobbin was playing up and I saw the casing was loose. I think the position finger leaver was not fully placed back. So know thanks to you I am happily sewing again. 👏
I literally never comment on videos but I searched everywhere for an answer to this simple problem. I was so upset because I’m a novice seamstress but truly enjoy it and no answer would have meant taking my machine in to be serviced. Your video solved my issue in less than 5 minutes. Thank you SO MUCH!!
Thank you for making this video and keeping it online! I had been having problems with my bobbin and tried everything like putting in a different thread, needle, bobbin… turns out that that little place holder lip had just moved out of the way!
Million thanks! Your tutorial video is so simple and more than useful at the same time. I've found it just in time to save my sewing machine and keep my nerve:)) Thank you so much indeed!!
Thank you for saving my new sewing machine. I took the bobbin case our (thought there was thread caught). I couldn't get it back in. Watched your vid and waaalaaaaaa, I'm back.
Thank you! I wasn't quite on the edge (same issue you had as you installedit the first time, and thanked that you made that mistake to show us what to do). I have been fighting this for a couple hours now on my machine. Bravo!!!
And, I looked at the bobbin thread and found it to be very messy on the bobbin so I rewound that. I saw your comment below to Ms. Marsden-Hall which was also insightful and all related. Again, thank you.
Thanks! My bobbin case kept getting crossways and I thought that it wasn't installed correctly and I kept trying to figure out how to put it IN the hole underneath--even though it seemed to fit properly when it was just resting on the lip. The trick was using a screwdriver to flip that little wing doohickey over it. I really was getting it in place correctly before, it just wasn't being held there. BTW, I have a Singer model 4562 and my bobbin case works exactly the same as yours.
I agree with everyone else. This is a fantastic video. I sent a new machine to a person unable to afford to buy one and it arrived with bobbin case in crooked. Found your video and we are going to try to fix long distance so I don’t have to send machine back to vendor. Wish us luck!
My wife is no-kidding making some COVID masks for me to take to folks at work today, and she could not have completed them without your video! Thanks so much!
Thank you so much. I broke my case trying to put it back into my machine after my mom took it out. I ordered a new one and i cant wait to get it so i now will know to put it back correctly.
Thanks for the video showing how to get the bobbin case out and back in. Getting it out wasn't hard, but I needed your guidance to get it back in and check to see that it is seated correctly.
Thanks a lot for the video, really helpful. Mine popped out and I didn't know how to fix it, brought my Singer to repair and paid €90, when it happened second time looked in TH-cam and found your video, I'm very pleased with the outcome 😄😘
Excellent and simple. I've been paying $$$$ to have it re-installed every time it slips out. Going home to try this. Certain it will work. Thank you for the overview. . .
Thank you so much, you really helped me a lot. Somehow the bobbin case came lose and I did not know what to do with it. There was no German video to help me. Then I found yours ... YEAH ... so well explained!!!
Yes, thank you! Singer's manual is horrible and no help. Thought I'd broken the bobbin case. Was so frustrated that I considered violence against the machine--more than once! Whew! It's back to sewing like a champ. Did I say, THANK YOU!!!?
Thank you so much. Thats saved me a few quid at the sewing machine repair shop (pretty sure he charged me for an imaginary part last time this happened anyway) X
that was great. for some reason I was CERTAIN the botton holder had to go UNDER the bit of sheetmetal to the right of it. I was ready to unscrew it and all. I found that if I just hold my thumb down on it and wind the driveline handle (on the end) it would click in place and I would literally hear a click and then could slide the little holder bit on the top left over it.
I have just bought this Singer machine, model 9022. The bobbin case was wiggling, so after watching your tutorial I see I’m missing the little arm that swings side to side to hold the bobbin tight in the bobbin case. Do you know if I can get the part.
I’m having trouble trying to find a bobbin case that fits my stylist 413. Where can I find one. I know the back form shape is designed differently than others and I just can’t find the black plastic replacement ones.
Could you please show the same thing for Singer M1005 sewing machine? I removed the bobbin case to clean the accumulated lint , but I can't insert it properly now 😔
thanks , my 6233 has a nasty little spring on the opposite side to the position finger. iv done somethings wrong. it started breaking thread, i took the shuttle off cos it was all bound up underneath. now the thread doesnt want to ride over the bobbin case, and just tears up before the needle. what a bother
I unscrewed also the silver colour plate...it has two long screws that don't seem to screw back and a little one where a little metal hook attaches , but there is no whole to screw it back in...help...
Thank you very much, really well explained. Could you please post more hints and tips, im struggling with the bottom thread getting caught up in bunches? Help please... ;)x
+Joanne marsden-Hall This is a worldwide problem. Most often it is caused by a misthread of the upper spool, make sure your spool thread finds its way into the top tension assembly. On the new machines its hidden, on the old machines its stuck up on the front and very visible. What happens is, the spool thread misses the tension discs in the tension dial, this makes the thread too loose and its being pulled under the fabric by the bottom thread, which is tight. I call it thread nesting, big loops and jams. Don't hesitate to call with any related questions SINGEROnline.com 800-559-6729
Excellent. Short, pithy, too the point. Leaves nothing out. The booklet from Singer fooled me. When I removed it, there was not enough light for me to see that the black Apollo Bobbin Case was was on-top of the black Position Bracket. I spent fifteen minutes trying to get it UNDER the Position Bracket. Sigh! I know better, but my Idiot Brain was in charge. I should never have removed the Apollo Bobbin Case until I had enough light to see how it was positioned before removal.
Any chance you could do one with a Singer 9410? I took the old bobbin case out to clean it, but I cannot for the life of me get it seated back in there properly! It's driving me nuts.
Great video. I was preparing Wednesday nights sermon message and my wife came downstairs to look for a small screw driver as she was putting a zipper on a friends coat. Originally she had problems putting the bobbin case back in. This video fixed that issue, but that was not the problem. She has a singer 5040C and when I took the covers off, I found two halves of the plastic gear that runs down to operates the bobbin mechanism. I have searched for hours to do this. Any ideas? Thanks and God bless.
Ok I put it back but now it keeps wraping the top thread around the bobbin case. I'm having a issue. Can u help? Please. I have a merrit 4525 singer. No sewing tech within 70 miles. Thank u
I have a Singer 9410 and the bobbin casing looks the same as this one, but it isn't fitting the same. There is a little wire....thingy...that showed up out of nowhere when I started taking screws out(dumb) and I'm not sure if that is suppose to help keep more tension for my casing to stay in place....please say you understand what I'm talking about. Help! :(
Hi, I know this is an old thread..but I am having an issue...I have placed the bobbin case in, which I have done previously..but for some reason the cover won't slip over it..*puzzled*
Thanks for the video!..Wow..ok..so why did singer go with the plastic casing in a heavy-duty type machine? I'm going to take another stab at it after watching your video...I'm surprised that they didn't do a better job w the design. I have 6 sewing machines & 4 are singer...I never had so much problem with the casing or bobbin area as I have w this thing.Honestly, I was contemplating the trash can for it & all because of that little plastic bobbin casing.
It took me a few hours of fiddling to get this bobbin case to fit and not come loose. There has to be and easier method. Now I cannot get the top thread to catch hold of the bobbin thread. Yikes
![[LIVE] : ONE ลุมพินี 78 | คู่เอก "ปกรณ์ vs ฟาบิโอ"](http://i.ytimg.com/vi/LSOmgl0Th2c/mqdefault.jpg)
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 13](http://i.ytimg.com/vi/NlY2uzrALY8/mqdefault.jpg)
Spent hours trying to put my bobin case back and the videos on the topic didn’t help until I found yours. Within moments I was back to sewing a touch cell phone bag with cross body straps. It looks beautiful and I am anticipating my next project. I have vintage sewing machine from Singer and a few antique ones thinking about seing how these work. Your video was great for me. Thank you for posting it.😁
Thank you so much for this easy explanation. I recently had my machine serviced when suddenly the bobbin was playing up and I saw the casing was loose. I think the position finger leaver was not fully placed back. So know thanks to you I am happily sewing again. 👏
I literally never comment on videos but I searched everywhere for an answer to this simple problem. I was so upset because I’m a novice seamstress but truly enjoy it and no answer would have meant taking my machine in to be serviced. Your video solved my issue in less than 5 minutes. Thank you SO MUCH!!
Thank you for making this video and keeping it online! I had been having problems with my bobbin and tried everything like putting in a different thread, needle, bobbin… turns out that that little place holder lip had just moved out of the way!
And two years later I am saying thank you again!!!!! I meant to take a photo before I pulled the darn thing out!!! I am so glad you posted this!!!!!
Million thanks! Your tutorial video is so simple and more than useful at the same time. I've found it just in time to save my sewing machine and keep my nerve:)) Thank you so much indeed!!
Thank you for saving my new sewing machine. I took the bobbin case our (thought there was thread caught). I couldn't get it back in. Watched your vid and waaalaaaaaa, I'm back.
Thank you! I wasn't quite on the edge (same issue you had as you installedit the first time, and thanked that you made that mistake to show us what to do). I have been fighting this for a couple hours now on my machine. Bravo!!!
I cannot thank you enough for this video! Pulling my hair out trying to figure out what was wrong. This was exactly the problem. Many kudos~!
And, I looked at the bobbin thread and found it to be very messy on the bobbin so I rewound that. I saw your comment below to Ms. Marsden-Hall which was also insightful and all related. Again, thank you.
Thanks! My bobbin case kept getting crossways and I thought that it wasn't installed correctly and I kept trying to figure out how to put it IN the hole underneath--even though it seemed to fit properly when it was just resting on the lip. The trick was using a screwdriver to flip that little wing doohickey over it. I really was getting it in place correctly before, it just wasn't being held there.
BTW, I have a Singer model 4562 and my bobbin case works exactly the same as yours.
I agree with everyone else. This is a fantastic video. I sent a new machine to a person unable to afford to buy one and it arrived with bobbin case in crooked. Found your video and we are going to try to fix long distance so I don’t have to send machine back to vendor. Wish us luck!
Very Ginny. After the bobbin case is in, put a drop of oil on the edge of it where it meets the silver hook at 9 0Clock.
Thank so much ..YOU ARE A SAVIOR...I HAVE THE OLDEST 974 MADE IN MEXICO MODEL...FOR THE LIFE OF ME I WAS STRUGGLING XOXO
Thank you! I have spent HOURS trying to get that bugger back in place. Your video has saved my machine from my baseball bat :\
THANK YOU I COULD NOT GET MINE BACK
Thank you very, very much! You saved me. And my sewing machine.
My wife is no-kidding making some COVID masks for me to take to folks at work today, and she could not have completed them without your video! Thanks so much!
Thank you for all the information. Husband and I fixed my machine in one afternoon. Back to sewing again.
Thanks, you saved me. Frustration plummeting.
Great thanks, struggled with that for weeks
Thank you so much. I broke my case trying to put it back into my machine after my mom took it out. I ordered a new one and i cant wait to get it so i now will know to put it back correctly.
Thanks for the video showing how to get the bobbin case out and back in. Getting it out wasn't hard, but I needed your guidance to get it back in and check to see that it is seated correctly.
Thanks a lot for the video, really helpful. Mine popped out and I didn't know how to fix it, brought my Singer to repair and paid €90, when it happened second time looked in TH-cam and found your video, I'm very pleased with the outcome 😄😘
OMG thank you for posting this! After a year with no machine, it is now working again!
Thank you for posting this! I was having the hardest time trying to put mine back in the machine!
me to... thanks :)
I wish I had watched this before I broke my bobbin case. Ouch.
thank you i have been trying to figure this out for 5hrs
Excellent and simple. I've been paying $$$$ to have it re-installed every time it slips out. Going home to try this. Certain it will work. Thank you for the overview. . .
Great instructions! wish the picture was a little clearer but I got the case back in correctly! Thanks!
You are absolutely fabulous. And I am so grateful
Thank you so much, you really helped me a lot. Somehow the bobbin case came lose and I did not know what to do with it. There was no German video to help me. Then I found yours ... YEAH ... so well explained!!!
Yes, thank you! Singer's manual is horrible and no help. Thought I'd broken the bobbin case. Was so frustrated that I considered violence against the machine--more than once! Whew! It's back to sewing like a champ. Did I say, THANK YOU!!!?
Thank u! I was about to give up but my machine is running again ♡
Thanks a ton! I was completely lost. I fixed it after watching your video!
Thank u so much
Ur video is very helpful for me
Thanks again
Thousand thanks for your video! You saved my day, my money and my to-be-sewed skirt :-) Kudos for you!
Thanks a million, this really helped. the driver had slipped out and I didn't know how to put it back in
Thank you so much!
Grandmother left me a machine and I somehow managed to pop that out and freaked.
An exceptionally helpful video! Thank you - JUST what I was looking for!
Thank you! Thank you! Thank you! Just what I needed! 😭 😅 👏
Thank you so much This video is a sol of my problem
Thank you so much. Thats saved me a few quid at the sewing machine repair shop (pretty sure he charged me for an imaginary part last time this happened anyway) X
This video saved my sister's dance date!
Thank you! Thank you! Thank you!
Thank you!!!! This saved me so much!
this video was the most helpful out of all the ones i found, thank you so much.
Easy peasy! I thought I knew something until I tackled this. Case still rattling.
I was on the verge of tears! Thank you so much for this!!!
Same!!! I have been struggling with getting this bobbin case back in for 10 minutes. Watch this video and get it in within about 30 seconds.
Thank you! Needed help reinstalling this when some thread got stuck.
Thanks - that saved me a lot of grief!
Thank you sew much for showing me how this bobbin holder works, I thought it was defective.
Thank God for this video...trying to finish a project a 5:30 am and this thing came disloged almost cried...
THANK YOU SO MUCH!!! I'm so glad you made this video!
Wow finally got the answer thanks so much had so much grief
Thank you!!!!!I didn't notice the latch and even I tried super glue to hold the case in a place :) silly me.Great video!!!!!!
Thank you for sharing this.
This video helped me so much! Thank you!
Thank you so much! Best explanation ever!
Great vid demo. Thanks.
Thank you so much! I just watch your video and tadannnnn! Fixe it.
This was oh so very helpful. Thank you so very much.
Thank you very much for solving my bobbin case problem after watching your video tutorial👍
God, I love you. Thought I wrecked my mom’s old 6217C
Thanks ! Well done video. Very helpful.
that was great. for some reason I was CERTAIN the botton holder had to go UNDER the bit of sheetmetal to the right of it. I was ready to unscrew it and all. I found that if I just hold my thumb down on it and wind the driveline handle (on the end) it would click in place and I would literally hear a click and then could slide the little holder bit on the top left over it.
Thanks. It would be useful if I new (or you told) how to remove the plate to open this cavity.
THANKS! You saved my sanity
Thank you very much. Kind of you.
Thank the universe I found this video lol.
Really helpful
Thank you thank you thank you!!
Thank you thank you oh man your awesome 😻😻😻😻😻😻😻😻
this helped me so much, thank you
i think im getting the hang of it a bit now. can you recommend a bullet proof basic stitcher (table top)? thanks for vid
Any idea how I could buy a new bobbin case for this model??
I have just bought this Singer machine, model 9022. The bobbin case was wiggling, so after watching your tutorial I see I’m missing the little arm that swings side to side to hold the bobbin tight in the bobbin case. Do you know if I can get the part.
Brilliant - Thank you
I’m having trouble trying to find a bobbin case that fits my stylist 413. Where can I find one. I know the back form shape is designed differently than others and I just can’t find the black plastic replacement ones.
Thank you!
Could you please show the same thing for Singer M1005 sewing machine? I removed the bobbin case to clean the accumulated lint , but I can't insert it properly now 😔
thanks , my 6233 has a nasty little spring on the opposite side to the position finger. iv done somethings wrong. it started breaking thread, i took the shuttle off cos it was all bound up underneath.
now the thread doesnt want to ride over the bobbin case, and just tears up before the needle. what a bother
I unscrewed also the silver colour plate...it has two long screws that don't seem to screw back and a little one where a little metal hook attaches , but there is no whole to screw it back in...help...
Thank you very much, really well explained.
Could you please post more hints and tips, im struggling with the bottom thread getting caught up in bunches? Help please... ;)x
+Joanne marsden-Hall This is a worldwide problem. Most often it is caused by a misthread of the upper spool, make sure your spool thread finds its way into the top tension assembly. On the new machines its hidden, on the old machines its stuck up on the front and very visible. What happens is, the spool thread misses the tension discs in the tension dial, this makes the thread too loose and its being pulled under the fabric by the bottom thread, which is tight. I call it thread nesting, big loops and jams.
Don't hesitate to call with any related questions SINGEROnline.com 800-559-6729
Thank you!!!!
Thanks a lot
Excellent. Short, pithy, too the point. Leaves nothing out. The booklet from Singer fooled me. When I removed it, there was not enough light for me to see that the black Apollo Bobbin Case was was on-top of the black Position Bracket. I spent fifteen minutes trying to get it UNDER the Position Bracket. Sigh! I know better, but my Idiot Brain was in charge. I should never have removed the Apollo Bobbin Case until I had enough light to see how it was positioned before removal.
Any chance you could do one with a Singer 9410? I took the old bobbin case out to clean it, but I cannot for the life of me get it seated back in there properly! It's driving me nuts.
Thank you I thought I broke it 😂.
Thank you so much. Afraid I broke my grandmother's sewing machine that I borrowed for a project
Great video. I was preparing Wednesday nights sermon message and my wife came downstairs to look for a small screw driver as she was putting a zipper on a friends coat. Originally she had problems putting the bobbin case back in. This video fixed that issue, but that was not the problem.
She has a singer 5040C and when I took the covers off, I found two halves of the plastic gear that runs down to operates the bobbin mechanism. I have searched for hours to do this. Any ideas? Thanks and God bless.
You need a new gear, unfortunately I think its obsolete.
Oh my god thank you
Ok I put it back but now it keeps wraping the top thread around the bobbin case. I'm having a issue. Can u help? Please. I have a merrit 4525 singer. No sewing tech within 70 miles. Thank u
Pl make video for embroidery setting
I have a Singer 9410 and the bobbin casing looks the same as this one, but it isn't fitting the same. There is a little wire....thingy...that showed up out of nowhere when I started taking screws out(dumb) and I'm not sure if that is suppose to help keep more tension for my casing to stay in place....please say you understand what I'm talking about. Help! :(
plzz make a complete video about singer 3314c
Hi, I know this is an old thread..but I am having an issue...I have placed the bobbin case in, which I have done previously..but for some reason the cover won't slip over it..*puzzled*
Thanks for the video!..Wow..ok..so why did singer go with the plastic casing in a heavy-duty type machine? I'm going to take another stab at it after watching your video...I'm surprised that they didn't do a better job w the design. I have 6 sewing machines & 4 are singer...I never had so much problem with the casing or bobbin area as I have w this thing.Honestly, I was contemplating the trash can for it & all because of that little plastic bobbin casing.
How do you kn ok w what type of barbin case is required for a singer stylist machine. I purchase second hand
I have lost one of the screws that hold the casing where the bobbin is placed can you help me please, I have a Singer 2250
hi this is exactly the problem with my singer 3323 machine bobbin disk. It vibrates when I sew causing a disturbing sound.
I don't have the plastic piece that runs around the edge of it
singer samba 4 lower coil holder???
It took me a few hours of fiddling to get this bobbin case to fit and not come loose. There has to be and easier method. Now I cannot get the top thread to catch hold of the bobbin thread. Yikes
thanks, man 👍
I need help putting my tension plate and spring back in place, Please help!!!!