GT Power Series Cranks Install on a Hutch BMX 29" Z Frame
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- We've got some cranks! Today we're doing a simple install of some chrome GT Power Series cranks (175s) on Bernie's 29" Hutch BMX Z Frame Cruiser. We do need to apologize as the audio on Bernie's mic cut out maybe a third of the way into the video. We've been having some problems lately with the Rode Wireless Go 2 on one of the mic sets. The battery dies really quickly and I'm going to have to get it looked at.
Use these affiliate links to support the channel! Thanks!
Filmed on the Apple iPhone 14 ProMax
Audio from the Rode Wireless Go2. - amzn.to/3p5MnS3
GoPro 3 Way Handle - amzn.to/3DE3LW5
Some of the tools we use:
Ryobi Bicycle Pump (without the battery) - amzn.to/3d6sVlG
Ryobi 18-Volt ONE+ 1.5Ah Compact Lithium-Ion Battery - amzn.to/3BG8Ig9
Park Tool Pedal Wrench - amzn.to/3RAdJfH
Park Tool HPG-1 High Performance Bicycle Grease - amzn.to/3xgEYnn
Park Tool Chain Breaker CT 3.3 - amzn.to/3RQK4yv
Pedro's Tire Levers - amzn.to/3d5p0p2
T-handle Allen Wrench Set - amzn.to/3TUmpz3
Music from Epidemic Sound. To try it out yourself for a month for free, use this link..... www.epidemicso...
I keep my ID with me on every ride using a Road ID. Get 25% off using this link:
team.roadid.co...
Go check out some of my friends on YT!
Wheeltok - / wheeltok - Hawaii Bike Life
Poly C - / polycproduction - Hawaii Bike Life and Classic Cars
BC Bikes - BC Bikes - / @bcbikes
Rad BMX Builds - / @radbmxbuilds
-------------------------------SOCIAL-------------------------------
Follow me on Instagram and TikTok @cruising.in.the.808
I bought those handlebars after I saw Bernies 👌🏾🙏
Nice! I think they are pretty sweet. Thanks for watching another one!
Nice cranks. Been thinking about grabbing a pair of these in chrome also for my 96 Forest Green Dyno Sonic.
Thanks! Bernie loves them and I have them on my Monza. They look good and they arenʻt too expensive. Your Dyno sounds awesome! Thanks for the comment and for watching! 🤙🏻
Hawaii boy living in Japan here...gotta new sub. Get one of those old Cook bros racing BMX bikes..would love to see dat!
Howzit my Bruddah!! Thanks for the sub!! Appreciate that! Yeah an old Cook Bros frame would be sweet to build, if you can find one!! Thanks for watching and for the comment!!
Those smoked chrome cranks are sexy af. Kickass bike love the headset and disc brakes.
Thanks man! Thanks for sharing that and for watching! 🤙🏻
I agree, chrome BMX bikes just catch my eye the most!
Hard to beat chrome! The candy chrome blue on the Skyway is pretty close though! Thanks for watching!
Sweet Crank set guys... Gotta love those Gt bikes / Parts...
Thanks man! Yes, those GT parts and bikes are nice. Appreciate you watching and leaving a comment!
Good move ! The chrome cranks looks much better ! 👍🏼
I think so too! Thanks man! Appreciate you watching and leaving a comment!
Hutch frame, CW bars, GT cranks?? Frankenstein!😁
Haha! Yessir, this bike has parts from all over the place! Thanks for watching!
This bike needs a eblike kit, it already has the lightning bolt. 😂
You going hate me for saying this....Did you know that most companies offer frames that have chain tensioners built into the frames now...? Awesome stuff!!
All good man! Yes, I've seen some of those!
That Brooks saddle needs a Thomson post. 29er lookin slick tho Bernie!
Bernie must be Ilocano if he's frugal. 😂 Sweet cranks Bernie!
Haha! I'll have to ask him next time! Thanks for watching and leaving a comment!
In the meantime, Kevin! You should borrow some cranks from Bernie! So you can ride your new Race Inc. Bike!😎🤙💯
I finally got my cranks from Planet! Hope to finish the Skyway soon! Thanks!
@@cruisinginthe808 That's good news Kevin! Finally you can finish putting it together!🤙😀💯🚲
...And I just was going to invite you and Bernie to the shop for filming and stuff for your channel...It would have gave you two a little more room to work and film....The months not over, so we are NOT done yet!!
100%, My Trick Star back in the day was chrome
Had to get the Hutch in chrome! Thanks for watching and for the comment!
TNT derringer hubs are the low flange and the revolver hubs are the high flanged
Thanks for the clarification! Appreciate that!
Super nice. Do you have a link on the sproket?
cool where is the riding scene out there, i was i the navy in pearl harbor, raced at hickam bmx around 1991 -1993 raced with shannon gillete, jason enright, i remember jumping the scary guangas double jump.
We're on Kauai and I have to say the BMX scene isn't that big here. We do have some kids now jumping on these big BMX bikes and doing wheelies and the 20" BMX scene is also pretty small. Kids are on them riding in neighborhoods but we have no BMX track here anymore. I raced on Oahu once at a state meet at Keehi Lagoon. Wished I had a chance to race at Hickam! Thanks for watching and leaving a comment!
By any chance, do you have a link to Bernie's new cranks?
Here you go! www.bmxguru.com/collections/cranks-3-piece-cranks/products/gt-power-series-chromoly-3-piece-bmx-crank-175mm-chrome Thanks for watching!
Thank you so much. Mahalo
Another stellar video! I noticed the link above to the cranks also had them in 165. Is one length better than another depending on the bike size or your height? Looking for some GT cranks as well for a 94 GT interceptor build.
Yes, they make them in different lengths. It all depends on the size of your bike, your height, and what you are comfortable with. I've always used 175s but that's the length that I have used since my BMX days. Bernie changes his and goes up and down but in this last video he went back to 175s. Shorter crank lengths make it easier to pedal so keep that in mind. Sorry, I wished I could be more help!
Hey guys! I just picked up these same cranks for a GT 29er I'm building. I also noticed how hard it was to fit the spindle in to the crank. It only fits (by hand) a short distance, and must be tightened all the way with tools. Watching your video, and how hard Bernie had to 'wrench' the cranks on there - how difficult you think it would be to remove the cranks? I'm guessing the spindle bolt would come out easily, but to me- it doesn't seem like the crank would then slide off the spindle very easy. Thoughts? Thank you!
Here's what Bernie said...."The crank arm will always be hard to remove . You always have to use the crank removal tool." I think with the tool it should be ok to remove but yeah, you do need to put some muscle on them. That spindle makes it harder for sure.
@@cruisinginthe808 Gotchya! Honestly I didn't know there was such a thing as a 'crank removal tool' 😄 Thank you very much for your reply! 'Preciate ya's!! 👍😎
Awesome video! Please tell me what freewheel that it because it sounds beautiful 👌
We use the Origin8 Hornet in a lot of our builds. Looks good, has 108 paws so the sucker is loud, and it’s made well. Thanks for the comment and for watching! 🤙🏼
@@cruisinginthe808 thanks 👍
Let’s see if it’s available in the UK
I think your chain needs to be flipped over so the flat side goes againts the sprockets.
Whats the brand model of those tires?
Great looking swap. Chrome was the way to go.
Yep, chrome is hard to beat! Thanks man!
I think the front tire is backwards
Since Hutch is not the same Hutch that we grew up with Bitd JBD is the new owner and looks to drive on trends.... kinda like H.I.C. making surf boards under the new company saying it's like a old thruster....
I hear you but those old brands were like 40 or more years old and it’s hard to keep a business like that in the family for that long. All the old school bike companies are now run by other people. Haro doesn’t build his bikes anymore. Neither does GT. But if these companies can come out with bikes that looked and somewhat match what we grew up with, I think that’s cool for most people. Obviously if you want only OG parts you can definitely find them but at much higher prices. In the end, just do whatever it is you want to do. It’s your ride and your money. Thanks for the comment and for watching! 🤙🏼
Add some 27.5 wheels since you have the disc brakes
I send you a photo of my GT Rad Series i went from 29er to 27.5 it was a Tad big for me
That is an interesting idea! How are the gaps between the fork and the tires? Any other noticeable differences? Thanks for sharing that tip and for watching!
My wheel will be built by a local bike shop by this week it will have a gap but i keep you posted
What type of rims are best?
Thatʻs a hard question to answer simply because it depends on a few things. Do you want the old school look or do you want more of the modern type of rim? What color/finish do you want? How much are you willing to spend? Iʻve had good luck with the Sun Ryno Lites except their chrome plated version. I have a chrome plated set that the chrome is rubbing off for some reason. Not sure if itʻs because of our humidity in Hawaii or if I just have a bad set. But the anodized rims are awesome. What kind of bike do you have?
At BCbikes is dead!! :D :D
I gotta change that on my YT info page! Thanks for that reminder!
First
Chrome is becoming less common now as it’s apparently awful for the environment. Chrome plating.
Yeah you don’t see the chrome shops now like you did back in the day. Some are still doing it though. Thanks for the comment and for watching! 🤙🏼
like the cw bars.... are the ordginal mustach bars for the 80s.. or they repop cw or copys.?
Those are copies that someone makes on eBay. It would be cool to find some OG original bars but those are hard to come by. Thanks for watching and for the comment!