I Fixed Over 1,000 Sony TVs Here Is Everything I Learned | Master Series
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2023
- 2015 models
00:33 Symptoms caused by a defective mainboard for 2015 models
02:54 XBR-55X850C Dead/no power and cycling Mainboard eMMC Repair
06:10 XBR-55X900C & XBR-65X900C 4 and 6 blink quick Repair
09:04 XBR-65X900C Dead/no power, and cycling eMMC Mainboard Repair
12:28 XBR-65X900C 4&6 blink code LED Replacement
33:41 XBR-65X900C Dead/no power We fix everything that can go wrong on the Mainboard
2016 Models
42:45 XBR-65X850D Dead/no power eMMC Mainboard Repair
47:28 XBR-55X850D HDMI no signal HDMI processor Mainboard Repair
1:00:39 XBR-65X850D Dead/no power CPU Mainboard Repair
1:12:34 XBR-55X930D Dead/no power DPS board Repair
1:20:14 XBR55X930D Dead/no power CPU Mainboard Repair
1:25:52 XBR-55X930D Dead/no power eMMC Mainboard Repair
1:28:49 How to mod an XBR-75X940D Mainboard to work with an XBR-65X930D
2017 Models
1:40:02 Common symptoms and repair solutions for 2017 models
1:42:56 XBR-65X850E Dead/no power Power supply Repair
2018 Models
1:46:23 XBR-75X850F Dead/no power diagnostic & eMMC Mainboard Repair
1:52:50 XBR-49X900F Dead/no power FULL In-depth Diag + eMMC Mainboard Repair
1:56:52 XBR-65A8F Dead/no power diagnostic & eMMC Mainboard Repair
2019 Models
2:01:51 XBR-55X850G Dead/no power diagnostic & eMMC Mainboard Repair
2020 Models
2:06:53 XBR-65A8H Dead/no power CPU Mainboard Repair
Pairing Procedures
2:10:50 How to pairing process, what to do if pairing doesn't work
2:18:46 How to download software from Sony's website and file name change
Questions? Leave us a comment or contact us directly:
nickselectronics.com/pages/co...
info@nickselectronicrepair.com
520-838-9359
Supplies and tools we use:
Magnetic Non-Slip Precision Screwdriver Tool Kit 145 in 1: nickselectronics.com/products...
Hakko FX951 Soldering Iron: amzn.to/3FQfyhG
SN63PN37 Leaded Solder: amzn.to/3qScy0d
Desolder wick: amzn.to/33DAjjy
Kingbo Flux: amzn.to/42YWYBa
Hakko FR301 Desolder pump: amzn.to/3IhTKzc
MG Chemicals 4140A Flux Remover: amzn.to/4ayOPGh
Long nose Pliers: amzn.to/3TXr7y4
Tweezer set: amzn.to/3J4Mk2x
HQ Wire Strippers: amzn.to/4afy6YD
Wipes: amzn.to/4ayK67l
Compressed Air Duster: amzn.to/3JiIZ0h - วิทยาศาสตร์และเทคโนโลยี
![เจ้าผู้เดียว - ดิด คิตตี้ [OFFICIAL MV]](http://i.ytimg.com/vi/q0NLCYKBOTo/mqdefault.jpg)
2015 models
00:33 Symptoms caused by a defective mainboard for 2015 models
02:54 XBR-55X850C Dead/no power and cycling Mainboard eMMC Repair
06:10 XBR-55X900C & XBR-65X900C 4 and 6 blink quick Repair
09:04 XBR-65X900C Dead/no power, and cycling eMMC Mainboard Repair
12:28 XBR-65X900C 4&6 blink code LED Replacement
33:41 XBR-65X900C Dead/no power We fix everything that can go wrong on the Mainboard
2016 Models
42:45 XBR-65X850D Dead/no power eMMC Mainboard Repair
47:28 XBR-55X850D HDMI no signal HDMI processor Mainboard Repair
1:00:39 XBR-65X850D Dead/no power CPU Mainboard Repair
1:12:34 XBR-55X930D Dead/no power DPS board Repair
1:20:14 XBR55X930D Dead/no power CPU Mainboard Repair
1:25:52 XBR-55X930D Dead/no power eMMC Mainboard Repair
1:28:49 How to mod an XBR-75X940D Mainboard to work with an XBR-65X930D
2017 Models
1:40:02 Common symptoms and repair solutions for 2017 models
1:42:56 XBR-65X850E Dead/no power Power supply Repair
2018 Models
1:46:23 XBR-75X850F Dead/no power diagnostic & eMMC Mainboard Repair
1:52:50 XBR-49X900F Dead/no power FULL In-depth Diag + eMMC Mainboard Repair
1:56:52 XBR-65A8F Dead/no power diagnostic & eMMC Mainboard Repair
2019 Models
2:01:51 XBR-55X850G Dead/no power diagnostic & eMMC Mainboard Repair
2020 Models
2:06:53 XBR-65A8H Dead/no power CPU Mainboard Repair
Pairing Procedures
2:10:50 How to pairing process, what to do if pairing doesn't work
2:18:46 How to download software from Sony's website and file name change
Questions? Leave us a comment or contact us directly:
nickselectronics.com/pages/co...
info@nickselectronicrepair.com
520-838-9359
This channel is the authority on sony tv repair. I see Nick running a business, yet he also helps people as much as he can when he can for free, with these videos, and constant replies to questions.
:) Thank you for the very nice comment
Great video Nick!! So happy I found this channel when my main board died. You just repaired my KD-65X750F board and i can't thank you enough!
Hey I am happy to hear that and thank you for trusting us to work on your mainboard!
Thank you so much for sharing your wealth of knowledge and experience, you've created a tremendous trouble shooting resource for sony tv's🙂
Hello Nick, motivated by your very understandable repair descriptions, I brought my Sony KD-65XG8505 back to life. Since there is no way to repair boards in Austria, I replaced the main.
Thank you for your videos and explanations.
Greetings from Austria, Herbert😉
Glad I could help!
Hello. i have a KD-55XG9505, nobody in Bucharest, Romania seems to dare to change the backlight leds, because the risk to broke the panel. Bypassing the 4 blink red led error could cause heating and fireing the tv from inside.i dont know how to change that backlight leds nobody wants to mess with.
I am looking for same and this is rare.. everything is included..Thank you sir.
You are most welcome
Slowly but surely! 🤝
Good job brother
Thank you so much 😀
Great video Nick I don't have much time to watch in once, but I will pice by pice.
For me, this video isn't necessarily something to sit down and watch, but a tool you can use when you come across some of these Sony sets and you need a reminder of how to do the diag on them, or pair the replacement mainboard, and so on. We have over 40 Sony videos on the channel but it's disorganized. This way it's nice and organized for everyone.
I hope it helps!
GREAT!!!
Nick rules!
Rearlly nicr work & professional ..
I like you sir ...
Ali ..khartoum ..
Many many thanks
Thank you for sharing your knowledge........!!
My pleasure!
🎉
Nick hooray🎉
FANTASTIC content Nick! You do a great job empowering people to repair their TV's and explain things in a logical yet easily digestible way.
I have a XBR65X930C that I was able to repair due to your helpful videos. Unfortunately it didn't last too much longer. I have a few thin horizontal lines across the screen that I cannot get to go away regardless of which ribbon cable I pull off of the T-con board output. I'm suspecting gate driver failures (don't know how to confirm), but I cannot seem to source a replacement panel.
I REALLY appreciate the resource you provide to the community, keep up the great work!!
Anyway your video was AWESOME 😎
Glad you liked it!!
Thank you
you are very welcome
Hi. I have a xbr 65X855E as I've seen in your videos it is look like 65X850, from some days ago the screen turn to green and pink pattern like minute 1:40:36. Audio works ok when I push TV mode on the remote control, so it is seem that it is a just video issue. Do you know what is the problem and how can I fix it? I live in Argentina so it is impossible to get your repair services... main board number is A2170480A is the same of 65X850? Thanks a lot!!
Hey nick i have a question for you. I have a sony xbr49x900e. The tv suddenly developed a line horizontally 1/3rd of the way from the top. The line isint black or white but has some changing colours and the partof the screen above it is just a little bit brighter than the rest of the screen. I checked the ribbon cables and they seem to be ok. I cleaned them well. I know someone had similar issue and posted it on google but I havent had found a definite solution rather than “replacing” the whole tv as it isint in warranty anymore. Could u suggest what could be the problem?
First I would like to say thank you for posting the full model number of the TV. Unfortunately a horizontal line on that type of model is typically caused by the panel itself failing. I am sorry but this is a situation where it is not financially viable to fix the set. Replacing the TV is your best option.
Hello Nick. Hope your doing well and cheers for these videos. I'm troubleshooting a KD55xe8096 , I'm only getting 3.5 standby and no other volts, so I was doing the jumper trick to force it on, trouble is I'm getting good volts on tcon pin etc , however I'm not getting the 12 volts on the power-on pin( only the 3.5 due to standby jumper) ..... so am not any closer to narrowing down which board,I want to believe it's main board issue.....I should have said I'm only getting the 3.5 standby, nothing else, hence doing the jumpers
You are giving the voltage to the Power on pin from the standby voltage so that line should indeed only get the 3.3v.
What this will do however is that it will power on the board and the 12v line should now be active. So you need to check the 12v line for 12v not the power_on line.
For the 4 red light issue, grounding the blk_err wire did not work for me on X900F. Backlights would sometimes turn on when I press the screen but as soon as I let go my hand, it will shut off again. Is there any way to bypass the error on X900F?
That only works with the 900C. To fix a 4 blink issue with your TV, you have to replaec the LED strips.
Hello Nick! Thanks for your very informative videos!! I am troubleshooting an XBR 65X900E with the external power supply. My problem is dead no power lights or sound. I cannot find a list of voltages for the step-down board (in the TV) so that I can further troubleshoot the TV. I have bought a new step-down board and a used mainboard from eBay and I still have the same problem. I have measured the voltage from the external power supply, and it is 24v. I don't really have a way to load test it. Do you have any suggestions about next steps? More than willing to send parts to you as well. This TV has about 50 hours on it. Thanks for any information or help.
With those models I always see the mainboard go out. I have yet to see any other parts fail but other techs have reported that the small power board goes out and the external power supply goes out. Again I have never seen that before and have worked on a lot of these. Just check to see if you are getting voltages to the mainboard from the power supply. If you are, then the mainboard is the fault. If you aren't then that little power board is most likely the issue since you said you had 24v from the external brick.
If you still aren't able to identify which is at fault you can send in both along with the cable connecting the small power board and the mainboard and we can test them in our unit for functionality and go from there.
For that, I would say to contact us directly.
The video description has our contact info if you have more questions.
Great video Nick, how about a 5 blink code in the Sony KDL SERIES??
That is not a very common fault but that could be a panel failure, T-con, or mainboard. It depends on the model number of the set. Each model is different and tends to have different likely faults. I would recommend you post a new comment with the full model number and I can look more into it.
If you reply to this comment I won't get a notification and most likely won't see so that's why I ask for you to do a new comment.
Thanks for a great video. My kd-43x8305c was dead so i replaced main board after doing v checks as suggested on your video.
I ran the software update on the ebay board ahd got a pulsing white led that after an hour or so led turns blue, then restarts with pulsing white again. Any ideas as i cannot find any info on blue status
There is going to be a dark blue almost ultraviolet light to comes up right at the very end of the pairing process. Then it goes away and the TV is supposed to turn off and back on either asking for the pairing a second time or it will turn on as it should with picture and go to the normal boot up menu.
Now if it's stuck on the blue light or it keeps cycling back to pairing indefinitely it is often due to the mainboad being defective.
It's rare but sometimes it is because of the software on the flashdrive so maybe try redownloading the software fresh from the Sony support website and rename it to upgrade_loader.pkg
Good afternoon. I have a Sony XBR-65x850E that is displaying the 6 red blink error code. If you unplug the unit, let it cool, and plug it back in, it will boot up just fine and play for minutes to 5 to 10 minutes. It shuts down and that's when I get the six red blinks. Again, if you let it cool, unplug, replug, and turn it back on it will start up and play for a while.
Any suggestions? It sounds like possibly overheating, but, I have confirmed that the vents are not clogged and it is open in the back for lots of airflow.
This is due to bad LED strips. If you go to your settings and bring the backlight brightness down you will probably notice the set will play for a longer duration of time before going back to the 6-blink fault.
The fix is to replace your LED strips which is a very labor-intensive process. I wouldn't usually recommend doing it yourself as this is also a high-risk repair as you have to remove the screen from the set to access the backlight which can often lead to cracking the screen if not done correctly.
For the 85x850g would it be the main board issue when it’s stuck on the Sony logo and cycle on and off, sometimes turn the screen green , or flickering the image of the Sony logo?
Stuck on Sony logo is most definitely a Mainboard fault. Cycling on and off is most definitely a mainboard fault.
Flickering of the image is a bit of an odd symptom but it can also be due to the mainboard although that could also be LED backlight related or a screen fault.
Hey Nick, I have an XBR-65X850F. The power supply has no output voltage on standby or Reg12. I ordered a new one and it’s the same thing. What are the odds the new power supply is also bad? Any thoughts?
Disconnect your power supply from everything else and then do voltage checks. Odds are more in favor that something else in the set is bringing down the voltage. If this is the case then reconnect each item one at a time until you find the culprit. If not, send me an email or fill out our contact form (both are in the video description) and we can discuss options further.
Hi NTVR
I have a Bravia 55x900F that powers on to the Android screen followed by black screen and 4 blinking reds. I want to try the "ground the BL-ERR pin trick" per your video, but the only place I find board markings for a BL-ERR pin on the 900F is at the connector on the Power Supply board. Your video shows doing the grounding at the LED Driver board but I cannot find board markings on the LED Driver board connector. So, which pin and where is it that I need to ground on the 900F? Do I simply ground the BL-ERR pin on the Power Supply board?
The BL_ERR ground trick only works for the 900c. Since you have a 900F you need to replace the LED strips to fix your set.
Sorry, no easy way out on the 900F model.
Hi, the eproom you are replacing with the new one, you upload the firmware via USB only, I have the new eproom, is it already programmed? thanks
No, the eMMC chip is pre programmed off the board, in a specialized device for programing IC chips that is very expensive. Then the programmed chip is soldered to the mainboard. Once that process is completed the mainbaord is fixed and working. However it does need to be paired to the TV it is being installed to. The pairing has nothing to do with the repair of the board or the eMMC chip. Any time you take a mainboard from one TV and are installing it into another you have to pair the mainboard.
I thought the days of TV repair man was gone
Not yet!
sony doesnt offer the firmware downloads for some of their tvs anymore. i need the firmware files for xbr-55x810c and xbr-65x810c. do u have these files?
Hello,
Yes unfortunately this is a new development. I don't have an easy way for people to access the firmware at this time other than I have it preloaded on flashdrives I can mail out but I have to charge for the flashdrive shipping and the time it takes to make all the drives. I am working on a fast and free alternative option such as hosting the software myself on megaupload (free to you but I have to pay for hosting) but it will take me some time before I can have it available.
Hi Nick - I have a TV question for you. I watched an old VHS that I found and it was just a weird, static-y white circle and now there's like a ghost girl that tells me scary things. Does this seem more like a short or possibly an emmc issue?
Haha I don't know I think I would need to watch the video myself to get a better idea of what this is.
I have a Sony NSX-46GT1 Model. Did a factory reset on it by accident. Now, its not letting me get pass the google account sign in step. Because its an older tv, and its not supported any more. Its not letting me skip this step. So i cannot even use the tv. Need your help please.
I am sorry I don't know how to help you as I haven't really worked on these models before or encountered that issue. All I would be able to do is try googling this around on the internet and see if someone else has had that problem before and how they resolved it.
If you find the answer, please let me know so that I can help the next person that asks with this issue.
Hi nick I’m repair my sony 55w905a change led strips tv work great but have little pink color what mistake doing? The led strips buy have blue light not know if can find led strip with wight light;)
That is most likely because the diffuser sheet is damaged from the original LEDs going out. There is nothing you can do about it unfortunately.
Hello again Nick. If the power board measures ok, however no standby light, no sign of any power at all except the click of the power board when plug is connected or disconnected from the wall?? Could a bad software update stop everything?
Yes that is commonly the case. Keep in mind though the software itself is usually not the fault, the fault is more commonly due to a defective eMMC chip. The chip itself degrades over time. Once it gets bad enough certain sections of the memory chip where the code is written to won't work so when the software needs to pull information from certain sections of the chip, it won't be able to and the system will freeze, corrupt, and cause these faults.
Hi Nick, today while continuing my troubleshooting I plug TV into wall and there is no click now,so the problem has got worse. Back to square one, really confused
Hi nick I have a Xbr 65 A9G when I plug it in I get the 4 flashing lights what do you recommend I do please….i live in the Bronx New York maybe you can point me to a repair shop you recommend near me thanks
That's going to be most likely a backlight failure. But I would recommend also checking your Power supply and LED driver as those have been known to occasionally also cause that blink code.
If I were you, I would find a seller with those 2 boards that are for sure known working, and that has a good return policy, swap them out and see what you get. If the fault is still there after replacing those 2 boards then it means you have defective backlights which is also more broadly called "panel" and you won't be able to fix this TV unfortunately unless you can get it done under warranty from Sony.
Hey Nick and co. I have a KD-65X9005C 3D tv. I had some LED vertical lines popping up on the right side of my screen last year, then I got 4 blink code and tv would not go past load screen and just shut off. I took your advice and moved the cable to earth to stop the error code from signalling to the power cable to shut down. This worked great and after a month even the vertical lines went away. This lasted 8 months. Ow they are back but like 4 lines now of different colours. Any ideas what to do here. This is the last best 3D tv and I don’t want to lose it. Any ideas what it could be?
4 blinks is LED failure. If the grounding of the fault is no longer enough to get good picture on screen You will need to replace your LED strips to fix this fault.
Good Afternoon. I have a Model # KD-55X720E Aug 2017 Ser # 4037952. I have where the TV will turn on, but will turn back off after 3 attempts and then flash the red light 3-5 times. I would like to know where your shop is or if you can recommend someone here in Houston,Texas? Signed:Love my Sony TV.
hello nick i want to asko you something i hope you don't mind.vlog you show that you had change the cpu with new one how can it possible to change cpu in sony because it will bind with emmc with a aes security key i worked on new chip its so difficult do you use old cpu or you program it by manufacturers tools
We just swap the CPU, no reprograming going on. Now binding with emmc. We might loose some of the smart features sometimes but those can easily be accessed via a firestick, roku, chromcast or other similar type device.
👍👍👍
If I do the jumper pins on my 75 900f I only get the backlight not the color test pattern. What could this be?
To me, it would mean your mainboard is defective. eBay is full of non-working boards so it's possible you received a dud or you didn't pair the board to your TV.
If you would like to send in your mainboard for us to live test and fix we can do so, this way we can confirm the diagnostic and then perform the repairs. This way you know for sure whether or not the mainboard was the fault, and since we live test the board both before and after repairs we know again for sure the board you will get back is fully functional. We also provide you with the flash drive and instructions for pairing.
Hi, i have a kdl 40w605b which connector should i cut/ground? don't have the tools to measure it out, tyvm
No need for specialized tools or to measure anything. I do that in the video to visually show you the viewer that what I am doing and saying is happening, nothing more. Per the video look for the BL_ERR pin on your power supply and look for a ground pin. Ground your BL_ERR pin and you are done. You just need to look for the legend and it will have all the information you need.
unfortunately it doesn't say on the board hence i asked if someone would know what pin it is for that specific model but ty@@NicksTVRepair
Please tell me how you resolve the issue with Netflix and Miracast when replacing EMMS?
We have customers use an external device to access smart apps. It's better and faster than any native app anyway. Most people already own a Firestick, Apple TV, Chromecast, or Roku anyway.
My old Sony tv : KD-49X8500B model has 3 time led blinking what is the problem .
Sorry I don't work with those older types sets. I wouldn't be able to help.
I have a 2016 Sony Xbox-55x850D, one day no power. Took to repair guy who told me it was main control board but he wanted 400+ to replace when the part is 170 to get to me. I opted to that router but main board came in and I installed and same issue. Any ideas on what to do next?
You have a 2016 Sony XBOX! Wow, I didn't know they made those! Incredible.
As for your Sony XBR-55X850D, the most likely reason you have no power is either because it wasn't paired to the TV, or the mainboard you were sold is defective.
These mainboards are discontinued and no longer available for sale, only used ones or refurbished ones are available now.
If you want to send in your mainboard to our repair facility, we can live test it for you, confirm the fault, repair it, and of course we live test the board again for functionality before sending it back. This way you know 100% for sure the board you sent was the fault since we confirmed it before repairs, and have 100% confidence it's working because we live-tested it on the way out.
Most sellers of these mainboards bought big lots of dozens of returns or broken TVs, gutted them, and put the parts for sale not really knowing what is and what is not working. That is why there are a lot of bad parts out there.
@@NicksTVRepair that autocorrect gets me every time!!! As for the board, I ordered new from encompass who is the genuine Sony parts providers listed on Sony website but either Sony or encompass wants to help regarding the board issue. You are the expert so I would default to your advice.
I have some area of concern that I need help with.
The standby light never comes on.
I used my multimeter but I don’t have a layout on board of what the pins correspond to. The readings I am getting are 19.95 which I can say is volt as indicated on power brick. Other reading is 2.24 which is suppose to be 3.3 as stated in your videos but I don’t know if that’s the fact for every tv. The reading is true on both ends other the connector from power board to main board. I have download software to sub drive to pair it but no power get to usb drive or optical as you state in video. So now i have old board and recently purchased board behaving the same way. Can we chat about this more directly through email or phone ? Thanks.
Have you worked on a Sony 65-inch XBR-65X950G? I can't find anything on TH-cam for this model. Literally nothing. I've had no issues with it yet, but when and if I do, I would like the knowledge to know how to, so I can fix it myself, but I can't find any info to do research so I can. Can you help me with this or point me in the right direction? I would greatly appreciate it, thank you...
We have worked on them but not often. I have had one come in with a 4 blink code which can be LED strip failure but also a backlight inverter. We have seen one come in with a bad panel, which we couldn't fix without replacing the entire screen. Unfortunately, that was cost prohibitive so we sold the customer a replacement Sony with a credit for their parts, and we have seen 2 with a mainboard fault.
So right now this TV does seem to be a bit all over the place for us in terms of common faults. But the good news is that while we have too small of a sample size to get reliable info, it means we don't see it fail that often.
If we do start seeing it come in more, I am sure we will do a video on it.
Hello,
My Tv 49wd755 have no power what you mean is the problem. I need help thanks :s
Sorry, I am not familiar with that model. The mainboard can cause a lot of the no-power faults, I would suggest replacing that first but that's a guess based on past experiences.
Hey Nick please help. Xbr-85x850g I have verticle lines that starts during or right after the sony logo. Its not the t-con i replaced it with a known good board. Whatelse could it be? Thank you
The fault you are describing sounds like a screen failure but there is a small chance they are due to the mainboard. Have you tried a new mainbaord?
Could you by send me an email with a short video of the Sony logo appearing properly and then the lines or a picture of the lines. That might give me a better idea of what could be happening. Our email is in the video description at the bottom of the description after all the time stamps.
Haven't tried a new mainboard. What email can i send you a video? Thanks
Also should note that it always looks perfect (hopefully not a screen) for the first 2 to 5 seconds then the verticle slowly appear until you cant really see anything but the lines.
Hi Nick, I have an 2014 Model XBR-55x850B. I can appreciate your videos and the details. My tv has started with a crackling sound output from the TV. The Optical, HDMI, and Internal Speakers exhibit the same behavior. Would replacing the board help? Or is there another part I can check?
Thank You!
Shay
Hello Shay,
Sorry, but none of the Sony repairs I do apply to your unit as I only work on 2015 and newer models. The 2013 and 2014 units did work drastically differently.
What I can tell you is I don't recommend trying to replace the mainboard as you will need to pair the new replacement mainboard to your TV and doing so is no longer possible as the software is no longer supported by Sony. Your best bet is to use an external sound system with a receiver and plug in your HDMI and other external devices to the receiver first so it can extract the audio and then send only the video signal to the TV.
This workaround is your best bet for resolving your audio issue.
@@NicksTVRepair Thank you for the response. I really appreciate the advice!
no problem
i have xbr-75X900E when turn on white led on later change to red light blingking 4 times but tv do not turn on no sound of click from thr power supply. Before when turning on you will hear the clicking sound and the tv turn on. What is that red led code 4 times blinking?
than you so much more power to your channe;
4 blinks indicates you have a backlight failure.
The backlight is another word for your LED's that illumiate your screen. You have to replace the LED strips to fix your TV. This is something that is more advanced and I would recommend you find a local TV shop to help you with this repair.
I have a Sony 49x900f and it turns on then turns off and blinks 4 times the bl error pin it at 0. What should I do. I assume I will need a new motherboard. Do you sell main boards?
4 blinks is a backlight failure. You will need to replace your LED strips most likely.
@@NicksTVRepair yeah but it turns on and I see the Sony logo then it goes to the android one. Then shuts off and does the 4 blinks. Also the bl error is at 0 and all the voltages seem fine. Do you have a video and do you sell the parts?
Have you worked on any 85x850g Sony TV?
Yup, we have fixed several of these already. Any specific question?
Post a new comment if you have a question. I don't get notifications on replies.
new cpu install ok .but how to new rpmb key install?
Can't do that unfortunately. Best way around it is to use an external device which will be far superior in performance than the built in apps ever will be anyways.
I have a 55x90j has 4 blinking lights. Is it worth fixing?
Is a Ferrari worth fixing.
I have an XBR75X850F that turns on and has sound and controller function but no image appears. Backlights seem to turn on (can see exterior glow around edges). Tried factory reboot and it now sounds like its on the initial setup screen but no image. Thoughts?
Just for posterity and anyone having the same problem, I took a guess and replaced T-Con board. TV works great now.
Wow really. That's unusual. Please follow up if the fault comes back. Usually we see mainboards failing and causing that issue.
@@NicksTVRepair I have the same issue. Backlight is on, I can hear sound but no picture. I've tried factory reset, updating firmware, checking FFC connectors. No flashing error codes. Also seems like there are no shorts near main chip. Any further tips where to dig?
I figured out that in my case it was faulty ribbon cable between TCON and motherboard. Huge thanks Nick!
I have a KD 55X9305C Manufacured 2015. It started to become slow over time, and when i got home from vacaition, its completely dead. Does it sound like a motherboard chip issue? /regards from sweden
Yes most likely you have an eMMC failure. I would recommend reaching out to MJK electronics, they are in France and should be able to help you with repairing the mainboard.
Thanks a lot. I will reach out to them. Would a main board replacement solve the problem also? If I get my hands on a main board I could change it myself maybe. Thanks again for taking the time to answer
Replacing the mainboard most likely would solve this.
Can the screen on a Xbr-65x900c be fixed
No screen can ever be fixed.
It can be replaced but that is not typically a financially viable repair.
Hey Nick. I have a 55X90J it’s only been used 2years. It has 4 blinking lights. Is it worth fixing? I on a limited income.
Regardless of your income, this TV is worth fixing. You will need to replace the LED strips to get it back up and running. It is a fairly labor intensive repair, but this is a very nice set and most definitely worth fixing. If you can afford the repairs right now or if you might need to save up for the repair is a different question only you can answer.
thank you very much for responding
55X900E No power issue, what is the common issues pls?
mainboard
XR-77A80CJ (OLED) screen flash once when powering on. Nothing else...no sound etc. All boards replaced and working. Probably main eMMC failed like many Android TVs?
Do you get an error code from the standby light? If yes, then please let me know exactly how many times it blinks. If not, then yes you are correct, it is probably the mainboard. If you already replaced the mainboard and still have the same issue, then it is likely you received a defective one. A lot of people sell replacement mainboards that don't work. I am biased of course but this is one of the reasons it makes more sense to have a new eMMC installed on your mainbaord than buying a used one. Even if the used one works, who knows for how long.
When we replace the eMMC you know you have a brand new eMMC chip that will last for years to come, and we also provide a 1 Year warranty with the repair which you won't ever get when buying a board even if it's brand new.
@@NicksTVRepair Thanks, its a family friends TV so unfortunately I don't know the blink code. I think blinks 4x as I recall googling for that and found many occurrences. I gave them shopjimmy's board set and said its a risk but could work if panel isn't defective. They bought the boards, swapped and TV worked. They are ecstatic. I have repaired quite a few recent model TVs and have come across dead eMMCs on HiSense and SONY Android TVs so suspect this is likely the mainboard issue. I asked them to give me the boards and perhaps I'll send it to you (free) and you can fix it and keep it for stock. Better than waste :) I'll reach out as soon as I get the boards (in different town) and get your ship address. thx for the great info Nick! I presume you are Nick on badcaps... I think you've commented on my TV repair posts a couple of times haha (howardc64)
@@NicksTVRepair TV was fixed with complete board set replacement. I'm guessing old main failed with eMMC (have encountered before on HiSense) I can ship the boards to you for repair/repair for free
I won't say no to free parts!
Can I learn how to read and repair emmc from you?
Sorry we don't offer a class at this time, maybe in the future if we get a significant amount of requests.
28:00 you've explained that need to be paired MoBo and the T-con, but didn't say how to do it. Would you mind mentioning it here, please? :)
Yeah, I did a few videos on that actually. If you check the video description there are time stamps to each video that is included here including 2 videos for pairing that are near the end.
Pairing Procedures
2:10:50 How to pairing process, what to do if pairing doesn't work
2:18:46 How to download software from Sony's website and file name change
@@NicksTVRepair thank you :)
I have a Sony Bravia KD-55X8507C TV. When I turn on the TV, it works fine without any problems. However, after using the TV for a longer period, approximately an hour, when I turn it off and then back on, it doesn't work. I only see a black screen (the backlight turns on), but nothing appears on the screen-no logo, no menus, and no volume. I suspect this has to do with the temperature because after about 30/40 minutes, the TV turns on normally without any issues.
I currently have the TV open, and I don't see any obvious signs of damage. The power board on the left is not excessively warm. The metal covering the Tcon board does get warm, but not to the point of burning your hands. The same goes for the mainboard (the black and white heatsinks) which get approximately equally warm, with the black one being slightly warmer than the white one.
Now the question is, is there anything I can do to get the TV to function normally again?
I can't say that I have ever heard of anyone with this issue before.
You get backlight but no audio and no picture? If you get both backlight and audio but no picture then I would say you may have a T-con fault. But if you can't get the audio either then you may have a mainboard fault
Sony KD65AF8. Logo comes on but nothing happens after that, just black screen. No standby light at any time. Is it also EMMC ?
Sure sounds like a mainboad fault. I can't guarantee a diagnostic done via 1 symptom in a TH-cam comment, but in my experience what you are describing is a classic mainboard fault. I am not saying eMMC because I have seen the CPU go out and also cause that fault, but if you replace the mainbaord you would cover both chips.
Hi nick
hello
Plz sir can I get sony xd-55xd8577 emmc file to download,plz help me
Sorry I don't have that one
What about Xbr-55x8500d emmc file,plz help me dir
Or can u get me the similar model for me like XBR-55X8500D
Sorry we only have software for the north american models.
We also don't really want to share our eMMC software we have acquired for free since it has typically cost us hundreds of dollars for each software sometimes even over $1,000 and since it is Sony's IP we can't legally sell it.
Plz sir only one model I need the emmc software. How much it will cost me cos iam to pay.thanks
My grandmother's tv is not powering on.even when you tell to do that replacement of the tv chip,my grandmother told don't replace it😢
We can fix the mainboard for you if you want but if your grandmother doesn't want it fixed then I won't be able to help.
How about a sony that flashes 6 times when powered on.
That will be LED strip failure. You will need to replace your LEDs to fix that issue.
@@NicksTVRepair Hello i’ve watched a few other videos and they disabled the function saying it was the rear light.When they disabled it the tv came on but i don’t know how well it worked.
That only works for the 900C models and those only. All other models I do not recommend doing that.
@@NicksTVRepair Thank you
No problem
I'll never buy a sony tv
They have the nicest picture and in my opinion easier to service than many other brands.
@@NicksTVRepairI agree about the picture quality.Most easy tvs to fix are Vestels, did not think they exist in the US,pretty popular OEM manufacturer of budget tv sets here in Europe though.
@@dimitrismaster What i like the most about the Sony sets is that unlike some of the other brands they don't typically have panel pailures, so the screens don't fail often and the LED's don't fail often (a couple lower end models do but few). So most of the time it's a board replacement which is much easier to fix than removing a screen to swap LED's.
@@NicksTVRepair I agree.Most of the times when a Sony is booked in for repair in my shop,I know that it's most probably a tcon or mainboard issue.Problem here is that emmc chips and processors aren't available in the local market.
@@dimitrismaster Yeah we have to buy from china all the time for those.
Hey man, thanks for this super useful video, i have a KD-49XH9505 (2020 led model) and it stopped turning on yesterday, i can boot until the Android logo then it turns off followed by 4 red blinking light, do you think you can identify this issue ? I've tried a hard reset but after the light turns green, it boots to the Android logo then turns off again. Help is appreciated 🫶
4 blinks is an indication of the following failure in order of the most to least likely
LED strips
LED driver board
Power supply
99% of the time it's the LEDs in my experience, sometimes its both the LEDS and the LED driver board or power supply. Almost never is it only the LED driver board but I can't say never because I have seen it happen twice before.
@@NicksTVRepair for my specific TV model right ? Thanks a lot for your response even if it made me hopeless for my TV 😅 i don't see myself changing the led strips at all if they're the culprit here, i hope it's not them that are causing this problem, if it's like the led board or the power board that's fine really ! Anyway thanks again, that put things into perspective for me
You can give those a try if you want but make sure you buy parts from a seller that allows returns in that case.
Slowly but surely! 🤝