so the tent is 200 and the max load is 500? Guess a 2 person tent is stretching it let alone a 4 person. This rack is sweet though especially since you can use it with the trifold
Hi There, The Adarac Aluminum Pro Series has a dynamic weight ratting of 500 lbs. Most rooftop tents are between 130-175 with a few of the two ladder tents going upwards of 230+ lbs. This means you are well within the dynamic weight ratting of this tent. Your static load is your stationary load, i.e. parked and ready to camp! This load is significantly stronger and that is how you can camp 4+ people in Roof Top Tents! In summary, this rack is more then capable of most roof top tent adventures :) I hope this clears everything up Cheers, Modula Racks
My question. If the tent is 200 lbs and you have 3 person tent.. average weight is 150lbs. Aren’t going going over weight limit? I got the exact same adarak only to realize the weight limit of 500lbs... I’m a bigger guy, with wifey and dog. Worried about the weight rating.
Generally speaking the weight rating published on racks is a dynamic weight rating meaning the rack can take this weight while driving on the road. Because there are much less forces at work while the vehicle is standing still (static weight rating) this usually means the rack can be loaded higher than the posted limit. However this is a use at your own risk situation as a static load rating is not something most rack manufactures publish. We hope this helps!
On issue I’ve found is, while camping, with the truck bed cover, your storage is limited. If you can afford it, I’d suggest a canopy that has roof racks on it (that are rated for 5-700lbs
Excellent video. I have a 2021 Colorado and am probably going with the Adarac M Series rack (12 inch height). Did you switch the cross bar end caps on your set up to face downwards?
Hey Sean 👋 Your right, this rack is not build with much aerodynamics. However with the rack on the bed of the truck you won't hear any noise it might make in the cabin. Also the uprights and bars can easily be removed when not in use.
This system generally holds up great. In this particular build, with the GIANT Redwood tent, we ended up adding a 3rd bar to spread the load. This customer needed a bit more support for the 5+ man tent and a very avid and adventurous outdoor lifestyle. 2-4 man tents are no problem.
Hi there, thank you for this video. Will this rack work on a 2016 Dodge Ram 1500 with a bak Flip trifold cover? We have visited a couple different spots and everyone says it isn’t doable and suggests getting a Retrax system. Please let me know!
Yes, we have put these beside a number of Bakflip covers without issue. As long as your tonneau mounting rails don't cover the trucks stake pockets you're golden!
I have a 2017 Nissan Titan 5.7 bed with this same bakflip cover. I couldn't find anything like this rack on your website for my truck. Is there any options like this for my truck?
Unfortunately, the Titan has no "off the shelf" solutions because Nissan did not put stake pockets in all 4 corners of the bed. You will need a custom solution and some drilling.
Thinking of getting the Adarac for a RTT. It is beefy enough and anchors tight enough for off road. Recently saw a review of a non Adarac that broke under 4x4 stress and a bit concerned if the Adarac is suitable. Just curious of thoughts?
Sorry for our late reply. We have had great success with Adarac and no failures. However offroad use is very hard to measure as the amount of stress each person subjects their vehicle to offroad is very different. We hope this helps!
The ADARAC has to be fit to your exact truck bed and unfortunately, our website fit tool is not yet capable of truck beds. I can set you up with a quote by phone or email: info@modularacks.com
Thanks for the video! I'm interested in this option and have a 175lbs tent (king size hardshell) to mount on a f150 5.5 bed. Would this work for me? Do you know if it's 500 lbs dynamic or static limit? Appreciate it
Hi There, Adarac rates their rack at 500lbs static and dynamic. This is a great solution if you are not exceeding 500lbs total. The new Elevate Rack from Truxedo works with Tonneau Covers and has a higher Payload rating. Might be worth checking out depending on your application! Please reach out if you have any further questions! Cheers, Team Modula
@@ModulaRacks this may have changed now since you made the video but on adarac's website it lists 1000lbs static and 400 dynamic offroad and 500 dynamic limits.
Hi there, Unfortunately there is no bed rack system that also works with a Tonneau Cover at the moment. Adarac does not make one for the Ridgeline. Vantech does make a very nice rack for the Ridgeline, it doesn't work with a cover however. Cheers, Bryan
Hmm, that is strange. Adarac lists a fitment for this truck and while we have not done this setup specifically on the fifth gen Chevy/GMC we have done this setup on the older 4th gen. We used the Aluminum Pro Series with the Bakflip hard folding Tonneau. Did they happen to tell you why this would not work?
Hmm, that is strange. Adarac lists a fitment for this truck and while we have not done this setup specifically on the fifth gen Chevy/GMC we have done this setup on the older 4th gen. We used the Aluminum Pro Series with the Bakflip hard folding Tonneau. Did they happen to tell you why this would not work?
Hi there, Unfortunately no, this system does not work with the Toyota Tacoma's. Tacoma's have no stake pockets for the Adarac System to attach to. Cheers, Team Modula
Hi There, Unfortnely this system does not work with any cover on the Toyota Tacoma's as the do not have stake pockets. You would need a cover such as a Retrax XR with the integrated rails and then a bed rack that is compatible with the T-Slots on the Retrax cover. Cheers, Team Modula
Hello, I am an avid kayak guy. I currently have a tonneau cover on my 2013 Tacoma PreRunner. The railing on the bed are pretty much exposed and free from the tonneau cover. Is there a way I can use the Adarac Bed Rack System and still keep my tonneau cover ? Is there a contact number I can call to get more information ?
Hey Danny, Sadly the Adarac system will not work on a Tacoma due to the truck having a composite bed instead of the metal one. This means the bed is not strong enough to support any type of rack on it. There are a few kits out there that utilize the the tracking system on the inside of the bed, however all of these are low racks and they will not give you enough clearance to carry kayaks. The only viable option would be the Yakima Overhaul and a new Retrax tonneau cover as these two are compatible with will give you the clearance you will need to carry kayaks. If you'd like to reach out to us directly to discuss further give us a call at 604-541-9966 or email info@modularacks.com Thanks!
Hi There, Yes, there are a few options that do integrate with the rail system of the Leer Ultra Groove. Reach out to us direct and we would be more then happy to go over those with you :) Cheers, Team Modula
We also have a low version profile rack which makes loading soo much easier. But it does not play nice with hard folding tonneaus. Some people will rig up a pull system if you have a garage or carport.
Hi Carlos, Yes, there is a rack for your truck (Excludes CarbonPro boxes) You could absolutely run one of the bed racks with a BakFlip cover like in the video! Please reach out to us direct if you would like some more information :) Cheers, Modula Racks
@@ModulaRacks I can’t seem to find a number to call you. But I try looking up that model number and nothing comes up. The one that’s showing that fits my truck if F2020092 in Matte finish.
![🎤 จับฉลากร้องเพลง x P’ #XXSIVK [EP.1] (2/2) เพื่อนจับได้คำไหน..ต้องร้องคำนั้น เริ่ม! 💓🎶 #MXFRUIT](http://i.ytimg.com/vi/1bJvMJXmeS4/mqdefault.jpg)
Also with that Adarac rack you can add a third set of uprights and crossbar in the center of your tent or load.
Also. Excellent way around the trifold tounnou cover.
My spelling is bad lol
Thanks for watching :)
so the tent is 200 and the max load is 500? Guess a 2 person tent is stretching it let alone a 4 person. This rack is sweet though especially since you can use it with the trifold
Hi There,
The Adarac Aluminum Pro Series has a dynamic weight ratting of 500 lbs. Most rooftop tents are between 130-175 with a few of the two ladder tents going upwards of 230+ lbs.
This means you are well within the dynamic weight ratting of this tent.
Your static load is your stationary load, i.e. parked and ready to camp! This load is significantly stronger and that is how you can camp 4+ people in Roof Top Tents!
In summary, this rack is more then capable of most roof top tent adventures :)
I hope this clears everything up
Cheers,
Modula Racks
@@ModulaRacks Yes thank you. I misheard
@@ModulaRacks is the static load rating published anywhere?
@@DouglasRigterink www.agricover.com/adarac/pro/
My question. If the tent is 200 lbs and you have 3 person tent.. average weight is 150lbs. Aren’t going going over weight limit?
I got the exact same adarak only to realize the weight limit of 500lbs... I’m a bigger guy, with wifey and dog. Worried about the weight rating.
Generally speaking the weight rating published on racks is a dynamic weight rating meaning the rack can take this weight while driving on the road. Because there are much less forces at work while the vehicle is standing still (static weight rating) this usually means the rack can be loaded higher than the posted limit. However this is a use at your own risk situation as a static load rating is not something most rack manufactures publish. We hope this helps!
@@ModulaRacks ty!
@@benflyt9827 Did this end up working out for you? I'm considering this option too for a bigger hardshell tent with the kids + dog.
@@boolisa you know what, it did. The weight limit is 500lbs ‘while in motion’
On issue I’ve found is, while camping, with the truck bed cover, your storage is limited.
If you can afford it, I’d suggest a canopy that has roof racks on it (that are rated for 5-700lbs
Excellent video. I have a 2021 Colorado and am probably going with the Adarac M Series rack (12 inch height). Did you switch the cross bar end caps on your set up to face downwards?
Good spot! Yes, we often flip the caps to add clearance. They fit either way.
How quiet is the rack at hwy speeds? It doesn't look very aerodynamic.
Hey Sean 👋
Your right, this rack is not build with much aerodynamics. However with the rack on the bed of the truck you won't hear any noise it might make in the cabin. Also the uprights and bars can easily be removed when not in use.
@@ModulaRacks very good, thanks for the feedback
Its not. I bet mpg drops like rocket
How has this held up to driving (on and off road) and camping? any issues with hardware, mouting, or general strength and stability?
This system generally holds up great. In this particular build, with the GIANT Redwood tent, we ended up adding a 3rd bar to spread the load. This customer needed a bit more support for the 5+ man tent and a very avid and adventurous outdoor lifestyle. 2-4 man tents are no problem.
Hi there, thank you for this video. Will this rack work on a 2016 Dodge Ram 1500 with a bak Flip trifold cover? We have visited a couple different spots and everyone says it isn’t doable and suggests getting a Retrax system. Please let me know!
Yes, we have put these beside a number of Bakflip covers without issue. As long as your tonneau mounting rails don't cover the trucks stake pockets you're golden!
I have the same truck model and year with the same tonneau. My stake pockets are not covered. Is this rack still my best option?
I have a 2017 Nissan Titan 5.7 bed with this same bakflip cover. I couldn't find anything like this rack on your website for my truck. Is there any options like this for my truck?
Unfortunately, the Titan has no "off the shelf" solutions because Nissan did not put stake pockets in all 4 corners of the bed. You will need a custom solution and some drilling.
Thinking of getting the Adarac for a RTT. It is beefy enough and anchors tight enough for off road. Recently saw a review of a non Adarac that broke under 4x4 stress and a bit concerned if the Adarac is suitable. Just curious of thoughts?
Sorry for our late reply. We have had great success with Adarac and no failures. However offroad use is very hard to measure as the amount of stress each person subjects their vehicle to offroad is very different. We hope this helps!
I can’t find this on your website?
The ADARAC has to be fit to your exact truck bed and unfortunately, our website fit tool is not yet capable of truck beds. I can set you up with a quote by phone or email: info@modularacks.com
I have a 2019 Chevy Silverado LD.....Looking for the Pro Series Black finish
How long would it take to get to New Jersey?
Hi Ted,
Reach out to us direct, with that being said about 10-15 business days direct from us.
Cheers,
Modula Racks
Thanks for the video! I'm interested in this option and have a 175lbs tent (king size hardshell) to mount on a f150 5.5 bed. Would this work for me? Do you know if it's 500 lbs dynamic or static limit? Appreciate it
Hi There,
Adarac rates their rack at 500lbs static and dynamic.
This is a great solution if you are not exceeding 500lbs total.
The new Elevate Rack from Truxedo works with Tonneau Covers and has a higher Payload rating. Might be worth checking out depending on your application!
Please reach out if you have any further questions!
Cheers,
Team Modula
@@ModulaRacks this may have changed now since you made the video but on adarac's website it lists 1000lbs static and 400 dynamic offroad and 500 dynamic limits.
Center of gravity ?
What is it you are looking for ?
Cheers,
Team Modula
I have 2017 honda ridgeline with 4-fold hard tonneau cover.. does your bed rack system this work?
Hi there,
Unfortunately there is no bed rack system that also works with a Tonneau Cover at the moment.
Adarac does not make one for the Ridgeline. Vantech does make a very nice rack for the Ridgeline, it doesn't work with a cover however.
Cheers,
Bryan
2021 gmc 1500 short bed with trifold
My local accessory shop says it womt fit .
Hmm, that is strange. Adarac lists a fitment for this truck and while we have not done this setup specifically on the fifth gen Chevy/GMC we have done this setup on the older 4th gen. We used the Aluminum Pro Series with the Bakflip hard folding Tonneau. Did they happen to tell you why this would not work?
Hmm, that is strange. Adarac lists a fitment for this truck and while we have not done this setup specifically on the fifth gen Chevy/GMC we have done this setup on the older 4th gen. We used the Aluminum Pro Series with the Bakflip hard folding Tonneau. Did they happen to tell you why this would not work?
This system will it fit on a 2017 Tacoma . Rack and tunnel cover
Hi there,
Unfortunately no, this system does not work with the Toyota Tacoma's.
Tacoma's have no stake pockets for the Adarac System to attach to.
Cheers,
Team Modula
I have the GMC 2020with the same bed cover . Which adarac system is on this truck . i need it for my rooftop tent.
Hi there,
We installed the Adarac Aluminum Pro Series on the truck in the video!
Cheers,
Team Modula
How about this adarac on a 2021 Tacoma with regular Velcro tonneau cover?
Hi There,
Unfortnely this system does not work with any cover on the Toyota Tacoma's as the do not have stake pockets.
You would need a cover such as a Retrax XR with the integrated rails and then a bed rack that is compatible with the T-Slots on the Retrax cover.
Cheers,
Team Modula
Hello, I am an avid kayak guy. I currently have a tonneau cover on my 2013 Tacoma PreRunner. The railing on the bed are pretty much exposed and free from the tonneau cover. Is there a way I can use the Adarac Bed Rack System and still keep my tonneau cover ? Is there a contact number I can call to get more information ?
Hey Danny, Sadly the Adarac system will not work on a Tacoma due to the truck having a composite bed instead of the metal one. This means the bed is not strong enough to support any type of rack on it. There are a few kits out there that utilize the the tracking system on the inside of the bed, however all of these are low racks and they will not give you enough clearance to carry kayaks. The only viable option would be the Yakima Overhaul and a new Retrax tonneau cover as these two are compatible with will give you the clearance you will need to carry kayaks. If you'd like to reach out to us directly to discuss further give us a call at 604-541-9966 or email info@modularacks.com
Thanks!
@@Slavic_Boer To date the Tundra's have a standard metal bed .
Do you have something like this that will work with the Leer Ultra Groove?
Hi There,
Yes, there are a few options that do integrate with the rail system of the Leer Ultra Groove.
Reach out to us direct and we would be more then happy to go over those with you :)
Cheers,
Team Modula
Will this set up work with a Jeep gladiator?
Both parts are available for the Gladiator. We would assume; yes. We haven't done this combination yet at the shop... yet!
I have a 2019 Tacoma with a bakflip cover.what is the bed rack called? I couldn’t find it on their website. Thanks
Hi Jeff this is an Adarac pro series by Agricover.
We ship for free to most places in North America. Let us know if you'd like a price and availability quote from us
Very nice product, but couldn’t find it on your website.
How do you get a 200lb+ tent up that high easily? That's my issues I really want that track for my smittybilt xl
We use a forklift at he shop, but 2-3 friends and a 2 step ladder worked for us before we had these luxuries.
We also have a low version profile rack which makes loading soo much easier. But it does not play nice with hard folding tonneaus. Some people will rig up a pull system if you have a garage or carport.
@@ModulaRacks I have a garage with closed off rafters and no way of getting my truck in the garage. I do like the system though
Hey do they work on a roll and lock system??
Hi There,
These work on certain Roll-N-Lock systems.
The stake pockets must not be covered for this bed rack to work.
Cheers,
Team Modula
Will this work on an 09 F150?
Yes! As long as your truck beds stake pockets are not covered.
Cheers,
Team Modula
Hi, I have a 2020 Silverado 1500 crew cab standard bed. Will it fit?
Hi Carlos,
Yes, there is a rack for your truck (Excludes CarbonPro boxes) You could absolutely run one of the bed racks with a BakFlip cover like in the video!
Please reach out to us direct if you would like some more information :)
Cheers,
Modula Racks
@@ModulaRacks thank you for your reply. I’m having a hard time finding it. Would you know the model number.
@@carlosalvarez-ek9ll F2020102 6' Bed, non-carbon bed, regular tailgate
@@ModulaRacks I can’t seem to find a number to call you. But I try looking up that model number and nothing comes up. The one that’s showing that fits my truck if F2020092 in Matte finish.
@@carlosalvarez-ek9ll Modula Racks 604 541 9966
What is your website?
www.modularacks.com
I have a Toyota Tundra 2020 with the inline bed rail locking mechanism for a rack can I use your same system for that truck
That's way to high. He will regret it when offroading
His needs were less off-road and more big family road trips :-)