My side hustle is exactly that, a side hustle. I only print on the weekends, how much trouble am I going to have letting the printer sit 5 to 6 days a week between prints?
Hello, with this printer we advise the recommended maintenance schedule for proper functionality upon purchase. Whether you are printing transfers or not as long as you are not neglecting the maintenance schedule your machine should be just fine!
That's great! Here is a link to connect with a representative and go over the machine and any questions you may have: aaprintsupplyco.com/pages/contact-us
I have issues with my final print not coming out of the machine. I have to turn it off and then back on and it will advance it out. What am I doing wrong?? I can’t even use the enter and exit buttons when it is finished printing.
Hello, we are sorry to hear you are experiencing issues with the printing. Here is our contact form to connect with technical support: aaprintsupplyco.com/pages/contact-us there is an upload section to where you may provide video or photos showing the situation in detail for fastest resolution
Segue link com os preços: aaprintsupplyco.com/products/prestige-a3-dtf-printer-and-a3-oven-combo Você pode enviar um e-mail para Harry@aaprintsupplyco.com para todos os detalhes sobre a compra e quanto tempo para entrega
There is a video for you on this channel in which there is a comparison between the speed of three printers. The speed of this printer was 15 minutes for a small design, and now you says that the speed is 7 minutes for an A3 size design.
Hello there! Thank you for sharing that link, I have just reviewed the video. In the speed comparison that printer was able to produce THREE images (approx 12" x 12") in under 15 minutes. Here is the time stamp with results: th-cam.com/video/fwZUpdR8ND8/w-d-xo.html Hope this clarifies things a bit!
Hey there! If you have not received your invitation in your welcome email our tech department can get you in - here is the contact form to get connected: aaprintsupplyco.com/pages/contact-us Please use your purchasing email for fastest processing
Is the powder station in this printer or do you have to do it separately and do you have to bake them or is ready for the material when it comes out of the printer?
Hello, this printer produces the images only onto the film - does not powder the print. After the machine produces the prints the user must apply the powder adhesive and cure it onto the wet ink with a heat source such as oven, dryer or heat press
Hello, the model has gone through a couple generations since its inception- here is the link to the current model: aaprintsupplyco.com/products/prestige-a4-dtf-printer
Is there a difference between the AA Prestige A3 and the Prestige A3. I was going to order the bundle and noticed one says AA and the one in the bundle does not. Just wanted to make sure in case there is a difference. Thank you :)
Hello, we ran into a supply chain issue with a motherboard at the manufacturer level. We know offer the A4 model: aaprintsupplyco.com/products/prestige-a4-dtf-printer and the new 13": aaprintsupplyco.com/products/prestige-r2-dtf-printer-1
I purchased the Prestige A3 Bundle 2 weeks ago. I cannot get any help with issues I'm having. I have reached out to PerfectPress who I purchased from who sent me to AA Print Supply who advised me someone from DTF Station would be in touch. RIght now I have spent $5000 and cannot print a decent transfer. Mind yopu it did print 12 good transfer but has gone downhill since. I need some help.
Hello, I learned the direct to film process drying my prints with the adhesive powder using just a heat press but an oven is a great way to increase efficiency with your direct to film production
Hello there, I want to purchase this printer, but before that, I want to know if this printer is made in China or USA? Secondly, how long the imprints will last after heating on the T-shirts? Looking forward to hearing from you. Thank you,
Hello, the printer is manufactured in China, but is QC'd domestically and all warranty/support of the DTF Station line of products in handled in the US. When properly applied transfers should hold strong 40+ washes
Looking for any jobs atm? It's extremely difficult finding any like-minded individuals around my area. (I work for the second largest printing company in the world)
Hello, to say the Prestige A3+ is the L1800 would not be accurate with the features included. Mainly the white ink management (circulation/agitation). That being said, the L1800 is a popular chassis used for many direct to film builds. Additionally, warranty and technical support separate this machine further just being a L1800
The included factory warranty covers the print head and all components of the machine. Extended warranty plan provides additional coverage for an extra 2 or 4 years
If you will order from American Supply have in consideration that they will "TEST" your machine for at least 5 weeks before sending it to you, probably longer if the shipment from China to their warehouse is delayed, I mean "testing", did I said shipment from China? I had to cancel my order because they are so afraid of their own product will fail that have test it for more than a month...
Hello and thank you for your feedback. We're very sorry your experience did not match your initial expectations when ordering the Prestige. It is an instance that is a result of the high volume of orders we have received for this printer and our ability to complete our QC testing prior to shipping. Although it has taken a bit longer than we expected to complete the QC testing of the printers we have orders for, we want to assure that our customers receive a fully tested and quality checked printer. We are in the process of improving our testing approach so I can assure you we'll do better in the near future.
@@AAPrintSupplyCo Probably you should mention your "lack of ability" before making a sale (you do not delay payment). We lost 2 customers because we weren't able to fulfill their orders on time, I gave them a 2 weeks turnaround 'cause the first time I called your customer service I was told the machine would be here by that time. I already purchased the same exactly machine from Amazon, (different brand tag) 7 days to arrive, so for sure I will still buying supplies from you, but we'll never be compensated for those customers we already lost.
We apologize for the customers you lost while waiting for your printer. Providing a fully tested unit is our intent but the delays are not. We continue to work on ways to improve the experience of our customers. With this, your feedback is greatly appreciated. We are sorry once again and we are happy to continue to provide you with supplies as needed.
Hello, we are projecting a lead time currently for this high demand printer and are fulfilling orders as fast as possible in the order in which they are received. Here is our contact form to connect with a support representative: aaprintsupplyco.com/pages/contact-us
This video answered the questions I had so far. Thank you😀
Hello, thank you for watching. We are glad the video was helpful!
What very specifically do you recommend for ink? Like specific name of the ink please so I don’t get the wrong one
Hello, this is the ink you would want to use with this model: aaprintsupplyco.com/products/dtf-station-dtf-textile-pigment-ink
How to fix red light’s alternatively flashing? Thanks
Hello, which icon is the light flashing over?
My side hustle is exactly that, a side hustle. I only print on the weekends, how much trouble am I going to have letting the printer sit 5 to 6 days a week between prints?
Hello, with this printer we advise the recommended maintenance schedule for proper functionality upon purchase. Whether you are printing transfers or not as long as you are not neglecting the maintenance schedule your machine should be just fine!
I’m very interested 🎉
That's great! Here is a link to connect with a representative and go over the machine and any questions you may have: aaprintsupplyco.com/pages/contact-us
I have issues with my final print not coming out of the machine. I have to turn it off and then back on and it will advance it out. What am I doing wrong?? I can’t even use the enter and exit buttons when it is finished printing.
Hello, we are sorry to hear you are experiencing issues with the printing. Here is our contact form to connect with technical support: aaprintsupplyco.com/pages/contact-us there is an upload section to where you may provide video or photos showing the situation in detail for fastest resolution
How long does it take to print an A3 sheet?
Hello, print time can vary depending on resolution and size of graphic. For a full coverage A3 size we estimate around 15 min with this machine
how do I buy this?
Hey there! Feel free to drop an email to Harry@aaprintsupplyco.com to get all set up!
Qual valor dessas impressora DTF aonde compro ela
Segue link com os preços: aaprintsupplyco.com/products/prestige-a3-dtf-printer-and-a3-oven-combo
Você pode enviar um e-mail para Harry@aaprintsupplyco.com para todos os detalhes sobre a compra e quanto tempo para entrega
There is a video for you on this channel in which there is a comparison between the speed of three printers. The speed of this printer was 15 minutes for a small design, and now you says that the speed is 7 minutes for an A3 size design.
Hello there! Thank you for sharing that link, I have just reviewed the video. In the speed comparison that printer was able to produce THREE images (approx 12" x 12") in under 15 minutes. Here is the time stamp with results: th-cam.com/video/fwZUpdR8ND8/w-d-xo.html Hope this clarifies things a bit!
Where do we find the slack channel once we purchase?
Hey there! If you have not received your invitation in your welcome email our tech department can get you in - here is the contact form to get connected: aaprintsupplyco.com/pages/contact-us Please use your purchasing email for fastest processing
Definitely picking one up by the end of next month.
You're going to love it!
Is the software a trial version or full version?
If it’s a trial, how much does it cost to buy the full version?
Hello, the printer price includes the FULL VERSION of the software!
Is the powder station in this printer or do you have to do it separately and do you have to bake them or is ready for the material when it comes out of the printer?
Hello, this printer produces the images only onto the film - does not powder the print. After the machine produces the prints the user must apply the powder adhesive and cure it onto the wet ink with a heat source such as oven, dryer or heat press
@@AAPrintSupplyCo do you have a printer that does it all?
We have full solution options! Drop me an email when you get this Estevan@aaprintsupplyco.com
Is there a roll option ; for rolled up film to feed instead of sheets ???
Hello, this model is going to be individual sheets only
We will be releasing a roll feed option desktop DTF printer very soon. Be sure to subscribe to be up to speed on all news and updates!
Hi has the prestige A3 +discontinued?
Already?
Hello, the model has gone through a couple generations since its inception- here is the link to the current model: aaprintsupplyco.com/products/prestige-a4-dtf-printer
Hi that is too small to replace the A3+.
If it's such a great printer with you guys pushing it.
And now that printer is discontinued.
Confusing.
How “stretchy” are the prints?
These transfers have a LOT of give. I would rate the stretchability to be comparable with direct to garment printing
Is there a difference between the AA Prestige A3 and the Prestige A3. I was going to order the bundle and noticed one says AA and the one in the bundle does not. Just wanted to make sure in case there is a difference. Thank you :)
Hello, they are the same printer! The bundle listing title was shortened for space but the AA is still in the bundle SKU.
Can you add wifi
Hello, we advise connection via printer USB cable - any third party adaptors for wireless connection have not been tested
Was this discontinued?
Hello, we ran into a supply chain issue with a motherboard at the manufacturer level. We know offer the A4 model: aaprintsupplyco.com/products/prestige-a4-dtf-printer and the new 13": aaprintsupplyco.com/products/prestige-r2-dtf-printer-1
I purchased the Prestige A3 Bundle 2 weeks ago. I cannot get any help with issues I'm having. I have reached out to PerfectPress who I purchased from who sent me to AA Print Supply who advised me someone from DTF Station would be in touch. RIght now I have spent $5000 and cannot print a decent transfer. Mind yopu it did print 12 good transfer but has gone downhill since. I need some help.
Addendum: All American reached out to me within 10 minutes of this post. Resolved the issue! Thank you so much!
So glad you were able to get the support you needed! Have a great holiday!
@@AAPrintSupplyCo how can I get someone to assist me with a prestige a3 issue I'm having?
Hello, your dealer should have support channels in place for assistance! Where did you get your prestige printer from?
Do you need an oven to go with this printer?
Hello, I learned the direct to film process drying my prints with the adhesive powder using just a heat press but an oven is a great way to increase efficiency with your direct to film production
Hello there,
I want to purchase this printer, but before that, I want to know if this printer is made in China or USA? Secondly, how long the imprints will last after heating on the T-shirts?
Looking forward to hearing from you.
Thank you,
Hello, the printer is manufactured in China, but is QC'd domestically and all warranty/support of the DTF Station line of products in handled in the US.
When properly applied transfers should hold strong 40+ washes
@@AAPrintSupplyCo Ok, thank you!
Looking for any jobs atm? It's extremely difficult finding any like-minded individuals around my area. (I work for the second largest printing company in the world)
Hey there, thanks for supporting the TH-cam channel. Be sure to subscribe for more fun informative content and best of luck in your search
What it feel like is a plastic feel once you print it on a shirt
Hello, the actual transfer is the water based textile printing ink and the hot melt powder - very nice hand feel :)
So is it the L1800 toy never answer it.
Hello, to say the Prestige A3+ is the L1800 would not be accurate with the features included. Mainly the white ink management (circulation/agitation). That being said, the L1800 is a popular chassis used for many direct to film builds. Additionally, warranty and technical support separate this machine further just being a L1800
@@AAPrintSupplyCo the extended warranty what does it cover
The included factory warranty covers the print head and all components of the machine. Extended warranty plan provides additional coverage for an extra 2 or 4 years
If you will order from American Supply have in consideration that they will "TEST" your machine for at least 5 weeks before sending it to you, probably longer if the shipment from China to their warehouse is delayed, I mean "testing", did I said shipment from China? I had to cancel my order because they are so afraid of their own product will fail that have test it for more than a month...
Hello and thank you for your feedback. We're very sorry your experience did not match your initial expectations when ordering the Prestige. It is an instance that is a result of the high volume of orders we have received for this printer and our ability to complete our QC testing prior to shipping. Although it has taken a bit longer than we expected to complete the QC testing of the printers we have orders for, we want to assure that our customers receive a fully tested and quality checked printer. We are in the process of improving our testing approach so I can assure you we'll do better in the near future.
@@AAPrintSupplyCo Probably you should mention your "lack of ability" before making a sale (you do not delay payment). We lost 2 customers because we weren't able to fulfill their orders on time, I gave them a 2 weeks turnaround 'cause the first time I called your customer service I was told the machine would be here by that time. I already purchased the same exactly machine from Amazon, (different brand tag) 7 days to arrive, so for sure I will still buying supplies from you, but we'll never be compensated for those customers we already lost.
We apologize for the customers you lost while waiting for your printer. Providing a fully tested unit is our intent but the delays are not. We continue to work on ways to improve the experience of our customers. With this, your feedback is greatly appreciated. We are sorry once again and we are happy to continue to provide you with supplies as needed.
They take time to send an order, I've been waiting for more than 1 month, losing money and time with this company
Hello, we are projecting a lead time currently for this high demand printer and are fulfilling orders as fast as possible in the order in which they are received. Here is our contact form to connect with a support representative: aaprintsupplyco.com/pages/contact-us