Thanks so much. I changed it like 3 years ago and ended up pushing it down and needed the gasket so providing the link to Amazon was awesome. Changed it in 5 minutes and then ordered a gasket. Appreciate you!
Thanks for the video. I have a precision 8. My air control valve for water fall leaks when I turn it on. The waterfall works but water leaks from control valve. Do I just need new rubber ring, like the one you showed at the end?
It should pop off, but sometimes it can be stuck. You could use pliers with a towel to prevent scaring the knob. If you have to use a pry bar put a towel between the knob and pry bar.
What did your waterfall look like before you fixed it? Mine doesn’t shoot out anymore. It just goes down the side of the tub. I’m thinking it’s the same fix though
It could be if you put the old piece back in and it is in two pieces now one of those pieces is preventing it from going back together. I would take it back apart and make sure nothing is in the way.
@@HowToWithJames will I got it out and the new one in. Waterfall still won't work. 😥 When turned on it trickles water and when off it's off. Must be clogged?
To me it sounds like you have debre in the spout. You could try sticking a flat plastic zip tie or something similar that could fit in it and move it side to side to see if it dislodges the debre in it. Here is what it looks outside the hot tub if that helps. www.spatex.com.au/jacuzzi-hot-tub-waterfall-fill-spout-assembly-j200
Hi Do you need some great lighting for your car to help you better driving, off-road? We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!
Thanks so much. I changed it like 3 years ago and ended up pushing it down and needed the gasket so providing the link to Amazon was awesome. Changed it in 5 minutes and then ordered a gasket. Appreciate you!
This video just made my day, and fixed my hot tub waterfall easily. Thanks so much!!!!
Thanks for the video. I have a precision 8. My air control valve for water fall leaks when I turn it on. The waterfall works but water leaks from control valve. Do I just need new rubber ring, like the one you showed at the end?
Hello, yes that is what it sounds like from what you explained. Good luck!
I was looking for the part when you fix the water fall. I must not be seeing it for whatever reason. Mine leaks behind the waterfall.
I did all the took it off mind was broken off can get the bottom part out
Does the knob just pop off? I feel like its going to break. Using a pry bar even and its very stuck
It should pop off, but sometimes it can be stuck. You could use pliers with a towel to prevent scaring the knob. If you have to use a pry bar put a towel between the knob and pry bar.
What did your waterfall look like before you fixed it? Mine doesn’t shoot out anymore. It just goes down the side of the tub. I’m thinking it’s the same fix though
That is what mine was doing. 👍
My original valve won't fit back in while waiting to get the new one shipped. Any advice?? Weird right
It could be if you put the old piece back in and it is in two pieces now one of those pieces is preventing it from going back together. I would take it back apart and make sure nothing is in the way.
@@HowToWithJames will I got it out and the new one in. Waterfall still won't work. 😥 When turned on it trickles water and when off it's off. Must be clogged?
My waterfall is not smooth like that. The flow is all over the place what would effects for that be??
To me it sounds like you have debre in the spout. You could try sticking a flat plastic zip tie or something similar that could fit in it and move it side to side to see if it dislodges the debre in it. Here is what it looks outside the hot tub if that helps. www.spatex.com.au/jacuzzi-hot-tub-waterfall-fill-spout-assembly-j200
Hi Do you need some great lighting for your car to help you better driving, off-road? We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!