Another video from EXO is never disappointing. He always films and edits them amazingly well. I have liked his channel for a quite long time now, and i will probably continue to.
I got one of these for my build a few months ago. It's the perfect solution for what I needed, and didn't have to spend like 80 bucks on a similar distro.
I got that, and the only drawback is if you want to use heatshrink and a ferrule on the power connection you have to cut that plastic part that goes over the wire on the inside. Other than that I love it!!
Awesome for those hard to reach fuses. Mine is 0 to 2 8 AWG wires to fuse two 8 AWG right behind that 8 AWG you can see in the photo to the right. It's draped
I bought one of those fuse blocks for my setup. I absolutely love how it simplifies all your connections. Took a while to get it though as it comes from China.
Have one in my car, just installed. Perfect to power my two amps and lc2i. Not sure what to do with the last output but Still nice and easy cable and fuse management.
I love that distro block. It’s very much like Audison’s SFD4, but like $75 cheaper. Would of loved it if it had a volt meter built in, but still a nice budget friendly distro block.
i have this same already installed in bmw. it is branded from a company, but anyway its rocking really nice. have a 1.5k monoblock a 4 ch amp and 2 caps
Exo your videos are the best, Really inspired me too get back into the woofers. Have watched a lot of your videos and would love too create my own monster build. Has given me so mant ideals but not sure where to start, Thanks again for sharing your journey with us. Perhaps one day a lot of the people on here will meet at a big show one day. Keep up the awesome work.
Thanks for the heads up EXO. Purchased and on the way. By the way, any chance you can go over head unit of choice? I am ready for a new head unit for this 8 sub project I'm working on.
I have seen these, and was thinking about using one for my solar power for my off grid house! Only in reverse, use it as a fused combiner! I'd need 20 amp to 40 amp each! 8-10ga, in, and 2-4 gauge out,
Nice overview, good job man, thanks for posting, this is gonna help me with my power block install for my power switch to run my back up generator off.
I love your channel watch all day. I just want to recommend a song to play in your car (frankenstaine, sorry for my spelling) type 50k subwoofer test and click the one made my trap woofer thanks it has a lot of bass it made my doors in my room shake a lot
Hey Exo, you're such a cool, smart and funny guy. It boggles my mind why you have dislikes on your videos. I learn soo much, while laughing because your entertaining. I guess you have to take the bad with the good. Keep on keeping on brother!
There's always gonna be haters. Usually they see the jealous ones. I do alot of car audio stuff up in Canada and sell alot of used equipment. Sold an amp to a guy other day and he asked for a bunch of advice regarding various things about his install. I answered all his questions and at the end he was so thankful and said you just spent 30 mins helping me for nothing! Then he said I reminded him of EXO, said I'm the Canadian Version of him lol.
Been looking at this distro design for like the past year haha. I saw that audison has one for $90 but then my buddy had the amazon version I saw.. Idk why I never took the time to buy it.
I have a question I wanna give a try to install epicenter I heard I can just get the power and ground straight from the amp terminals but I’m kinda feeling is not the proper way should I get like a distribution block instead? Thanks
Hey EXO, I have a suggestion, if you wanna be in touch with your fans more than just Instagram and Facebook maybe try discord. If you make a server on it your fans can send you direct messages and with a server you can make a bunch of chat groups for people to discuss and talk about your channel. As well you could have an area where your fans can give video ideas or any types of suggestions. Thanks for reading!
So how does the load still have power without the fuse? There must be a tiny run of copper inside the distribution block to power the LED too? Maybe that's how it's passing a tiny amount of current to the load?
Hey EXO! Not sure if you'll see this comment but if you do I could use a little bit of help. Currently I'm powering 2 6x9s and 2 6.5s off of a 2 channel amp and would like to upgrade to a 4 channel amp for better control. All 4 speakers are kicker rated for around 150 watts rms, what amplifier might you reccomend under $200? I know there are many factors that go into a new amp choice and I'm not sure what to go with do you have any suggestions? Thank you!
Dumb question I have a 2007 caddilac escalade so far I bought a new battery new alternator stock puts out 160 amp for car I have 2 amp one is a 8k taramp And the other amp is a 1200x4 taramp I'm running 2 battery total I have 2 12 inch subs skar evil the biggest ones And I'm running 4 6 1/2 door speakers beymas sounds amazing but I feel like I'm missing something Im trying to put 4 tweeter on the pillars but if you have any ideas or thoughts let me no just telling you my set up and also I have a android radio it's like a Tesla radio I like the radio because it's a big screen but what sucks it don't have sub pre out it only has 4 rca for my door speakers but I got my subs running with the factory sub speaker with a loc rca jacks my Tesla android radio was plug and play so I did not lose any button function with my steering wheel it kind of hooks up to my factory boss system but I ran all new wires on my doors just any thoughts will help because I no you no your stuff thanks buddy
Hi EXO! Would you be able to tell me if ferrule connectors fit in this ? I bought a distribution block for my build and didn’t check it right away. It turned out that the entrances/exits for the wires required square crimping if you were using ferrule connectors. 🙄 I’ve been shopping around for tools but I haven’t found anything that can crimp 4 AWG or 0 AWG. Also, I can’t return the block because i bought it like 4 months ago.
I need help trying to decide on using a pair of round or a pair of square speakers I'm using a gorrila spl class d 3500 watt amp and my price range is around 350 for the pair
Hey bro I hope you can really help me I see you know a lot about subwoofers and I have a cerwin vega strocker 12 and was thinking going sundown 12 zv12 but guy where I bought my sub said mine is better but I seen some crazy flex with sundowns so I'm not to convinced i hope you can help me out
So guys I need some help. I have 4 12 inch kenwoods running on 2 pioneer 1000 watt Amps, but I want to upgrade to a skar evl 18, on a skar 2500 watt amp, thoughts?
Another video from EXO is never disappointing. He always films and edits them amazingly well. I have liked his channel for a quite long time now, and i will probably continue to.
I got one of these for my build a few months ago. It's the perfect solution for what I needed, and didn't have to spend like 80 bucks on a similar distro.
I'm not in the market for a distro block. But I still find myself watching this video! Keep up the good work exo!
I bought this distro block so I can build a shop box/portable bluetooth stereo with a sub in it!
IT great to see people are looking out for the lil guy THANKS MAY GOD BLESSS !!!!!!!!!!!!!!!!!!
Happy FRIDAY!!! See you at the Sundown Show!?!?
Dang gotta work🙀 I'm close maybe I could hit you up one day!🍻🎄🐈🔥🔥🔥
Man I'm too far away I live around Texas right by Austin if you know where that's at
Please show us how u run ur second battery....I need to do one in my Silverado and want to see a "PRO" do it first....
Cant wait to see the build...
@@donttreadonme8330 going to Cleetus and cars?
Anybody remeber the video where his subewoofer was returned from a car shop and was totally damaged
Exo you sold me. Brought solved clutter problem.
I got that, and the only drawback is if you want to use heatshrink and a ferrule on the power connection you have to cut that plastic part that goes over the wire on the inside. Other than that I love it!!
Awesome for those hard to reach fuses.
Mine is 0 to 2 8 AWG wires to fuse two 8 AWG right behind that 8 AWG you can see in the photo to the right.
It's draped
I bought one of those fuse blocks for my setup. I absolutely love how it simplifies all your connections. Took a while to get it though as it comes from China.
On another note, I was able to fit my 2/0 welding cable power & ground wires into it too. Lol
It's Prime now. :)
What are they called
Picked one up a few months or so ago and haven’t got a chance to use it, but it seems very nice for the price.
i had that same block years ago and loved it
man I wish this video came out yesterday when I was looking for a distro block. great find man!
Have one in my car, just installed. Perfect to power my two amps and lc2i. Not sure what to do with the last output but Still nice and easy cable and fuse management.
Streetwires used to make a power/ground combo block about 18 years ago. Always liked it. But it was only a 4awg in and 8awg out
I love that distro block.
It’s very much like Audison’s SFD4, but like $75 cheaper.
Would of loved it if it had a volt meter built in, but still a nice budget friendly distro block.
i have this same already installed in bmw. it is branded from a company, but anyway its rocking really nice. have a 1.5k monoblock a 4 ch amp and 2 caps
I bought the distribution block and love it $43.00 on amazon next day delivery
Found 3 listing in Canadian Amazon site...different names but same product. $61.99, $43.99 and $30.99. I went with the $30.99 ($25USD) and it's great.
Yet another new device I need. First the Ohmie, now this!
That's a awesome distribution block EXO, especially for $28. Another great video as always and can't wait to see what's next man.
Same one I used in my install...worked great!
How many watts are you pushing with this product
Dude this is so crazy, I just bought this distribution block yesterday before I even watched this video! What are the chances!
has it worked well for you?
I have one of those in my malibu.. I love it
Exo your videos are the best, Really inspired me too get back into the woofers. Have watched a lot of your videos and would love too create my own monster build. Has given me so mant ideals but not sure where to start, Thanks again for sharing your journey with us. Perhaps one day a lot of the people on here will meet at a big show one day. Keep up the awesome work.
Thanks for the heads up EXO. Purchased and on the way.
By the way, any chance you can go over head unit of choice? I am ready for a new head unit for this 8 sub project I'm working on.
yes I agree. and whats your (exo) opinion on custom fitting a tablet or is there really that good of perks buying a good quality head unit??
I have seen these, and was thinking about using one for my solar power for my off grid house! Only in reverse, use it as a fused combiner! I'd need 20 amp to 40 amp each! 8-10ga, in, and 2-4 gauge out,
Loving the more frequent uploads especially with high the video quality. You're doing a great job EXO!
Thanks! This is what I was looking for. I think streetwires is out of business. I had 1 about 15 years ago.
I'm doing a minivan build so far I have two 12-in subs and two 15's
Worm nuts! That would be really weird looking if you seen a worm wriggling through the dirt, and then it's nuts breaking through with a POP sound.
Just ordered using your link !!!! Thanks for the good find!
Nice overview, good job man, thanks for posting, this is gonna help me with my power block install for my power switch to run my back up generator off.
Great video, I love your channel! 👍
I c u everywhere boosted boys pfi everywhere
I just placed an order for that distro block. It looks like it takes Mini ANL fuses. I hope it does because I have a bunch already.
Good solution to my similar issue great video thanks
I got it also.But the passthrough 0 pos.gauge is not fused
Dang 30 bucks, and the fault indicator is 🤯👌🏻
I love your channel watch all day.
I just want to recommend a song to play in your car (frankenstaine, sorry for my spelling) type 50k subwoofer test and click the one made my trap woofer thanks it has a lot of bass it made my doors in my room shake a lot
Hey Exo, you're such a cool, smart and funny guy. It boggles my mind why you have dislikes on your videos. I learn soo much, while laughing because your entertaining.
I guess you have to take the bad with the good.
Keep on keeping on brother!
There's always gonna be haters. Usually they see the jealous ones. I do alot of car audio stuff up in Canada and sell alot of used equipment. Sold an amp to a guy other day and he asked for a bunch of advice regarding various things about his install. I answered all his questions and at the end he was so thankful and said you just spent 30 mins helping me for nothing! Then he said I reminded him of EXO, said I'm the Canadian Version of him lol.
Much love and respect for you brother
I will see you in Hickory
Will there be a video on the head unit?
Been looking at this distro design for like the past year haha. I saw that audison has one for $90 but then my buddy had the amazon version I saw.. Idk why I never took the time to buy it.
its chinese junk tried it 2 times . now got the audison 100 times better
@@promo130
because it is better?
I love when you come up with new stuff bro keep going don’t stop
Thank you buddy
Very useful information and an accessory
I have a question I wanna give a try to install epicenter I heard I can just get the power and ground straight from the amp terminals but I’m kinda feeling is not the proper way should I get like a distribution block instead? Thanks
"Worm nuts"
Those poor worms! Thankfully, those were "set screws" and no worms were harmed in the making of that distribution block.
Also known as 'Grub Screws' but we all know what EXO meant so no real need to point it out really.
@@HashDogg06 actually there is. I was thinking of trying to order some spare WORM NUTS!! lol
That is good shit, gotta order one. Always with the useful content EXO!
Hey EXO, I have a suggestion, if you wanna be in touch with your fans more than just Instagram and Facebook maybe try discord. If you make a server on it your fans can send you direct messages and with a server you can make a bunch of chat groups for people to discuss and talk about your channel. As well you could have an area where your fans can give video ideas or any types of suggestions. Thanks for reading!
Muchísimas gracias por tu aporte, justo estoy necesitando uno 👍
Hey exo can you do a wiring diagram of your four channel hook up? Cool
Good stuff, dude. Appreciate you.
Another great video man I like every one video of them thank you bro
thanks for the info my friend, seems like a great product.
7hr drive would have to leave at like midnight. Haven't made up my mind on going yet.
SMD be like: Am i a joke to you? XD
😂😂😂😂
I ain't paying 100 bucks for no damn distribution block lol its just some metal and plastic
So how does the load still have power without the fuse? There must be a tiny run of copper inside the distribution block to power the LED too? Maybe that's how it's passing a tiny amount of current to the load?
GREAT video
Hey, I looked I couldn't find the full four install. Drop a link
Exo, i need to get to a show that you attend and get you in for a demo.. i would love to get your input...
could the warning light drain your battery if it stays on when your car is off?
What's up Exo.. wondering if u had recommendations on what balancer to use for yinlong cells?
Can you do a PSI vs Sundown video?
Wondering how large of a fuse you can put in there and if it would work with the large refuses like 200-amp
Hi EXO ,just subscribed to your channel .
Love your content .keep up the good work.
Hey EXO! Not sure if you'll see this comment but if you do I could use a little bit of help. Currently I'm powering 2 6x9s and 2 6.5s off of a 2 channel amp and would like to upgrade to a 4 channel amp for better control. All 4 speakers are kicker rated for around 150 watts rms, what amplifier might you reccomend under $200? I know there are many factors that go into a new amp choice and I'm not sure what to go with do you have any suggestions? Thank you!
Hi EXO you inspire me. I would love to meet you I am into stereos also.😊
Good job. I bought one.
Hey exo what batteries do you recommend for the best bang for your buck not trying to spend a ton of money of on batteries.
A piece of crud. Its made from aluminum. Great if you like voltage drops.
Mate it with CCA cable and enjoy even more voltage drop
I'll see u n hickory hope to meet u
Dumb question I have a 2007 caddilac escalade so far I bought a new battery new alternator stock puts out 160 amp for car I have 2 amp one is a 8k taramp
And the other amp is a 1200x4 taramp I'm running 2 battery total I have 2 12 inch subs skar evil the biggest ones
And I'm running 4 6 1/2 door speakers beymas sounds amazing but I feel like I'm missing something Im trying to put 4 tweeter on the pillars but if you have any ideas or thoughts let me no just telling you my set up and also I have a android radio it's like a Tesla radio I like the radio because it's a big screen but what sucks it don't have sub pre out it only has 4 rca for my door speakers but I got my subs running with the factory sub speaker with a loc rca jacks my Tesla android radio was plug and play so I did not lose any button function with my steering wheel it kind of hooks up to my factory boss system but I ran all new wires on my doors just any thoughts will help because I no you no your stuff thanks buddy
awesome. i needed something like this
Hey EXO! What size screws are you using to mount subs in walls? I seen your video on mounting screws/bolts but didn’t catch all the sizes.
I'll be getting one of them bro
Hi EXO! Would you be able to tell me if ferrule connectors fit in this ? I bought a distribution block for my build and didn’t check it right away. It turned out that the entrances/exits for the wires required square crimping if you were using ferrule connectors. 🙄
I’ve been shopping around for tools but I haven’t found anything that can crimp 4 AWG or 0 AWG. Also, I can’t return the block because i bought it like 4 months ago.
Awesome video 👍👍
you seem like a funny cool guy
Hey exo I have a problem I was going to see if you can help
SMD triggered by this :))
😂😂😂
hey mate, do you know what material is that thing made of ? alu or brass ?
Nice stuff q
Hello my friend🇷🇺✌
Just curious is the 0 gauge solid copper wire or copper clad aluminum wire? Lol I should know better lol
Can the block be used as a ground point. Because in my car i dont have a ground point. And i dont know how to make one
once my installs are done, never had issues. wondering how so many people blow fuses, amps, woofers so easily. Must be doing shit wrong.
Grandpa, swapping headunit doesn't count as a "instal"
What is the best 1/0 wire out there are does it matter
where can i find out about these shows?
Heroin is a hell of a drug
I need help trying to decide on using a pair of round or a pair of square speakers I'm using a gorrila spl class d 3500 watt amp and my price range is around 350 for the pair
Hey bro I hope you can really help me I see you know a lot about subwoofers and I have a cerwin vega strocker 12 and was thinking going sundown 12 zv12 but guy where I bought my sub said mine is better but I seen some crazy flex with sundowns so I'm not to convinced i hope you can help me out
Can i used midi fuse Stinger whit this Distribution fuse block?
A 12 zv5 I'm trying to change to my bad
So guys I need some help. I have 4 12 inch kenwoods running on 2 pioneer 1000 watt Amps, but I want to upgrade to a skar evl 18, on a skar 2500 watt amp, thoughts?
Is that a Blue Sea Systems clone?
Can I just run 4 gauge to the block and have 2 4 gauges coming out
That's what this is made for I believe
Say my brother I need help on how to install on a o3 ram
How do you spell it? Can’t find it on amazon
help with making a box for bms 18s430
Will this block do well for wiring up 2 dvc subs to a monoblock amp?
No you don't use a distribution block on subs
Can I hook up a 3500 watt amp to it?