ฝัง
- เผยแพร่เมื่อ 13 ก.พ. 2021
- Some idea of the cost's
Seats cost $400
Guages cost $230
Pillar support $80
dash mat $70
steering wheel $195
Boss Kit $80
Phone mount $25
I was spewing when I found out those clips where missing but i didnt want the whole video to go to waste so I thought heck why not just release it! hope you guys enojoy a little interior transformation on the Patrol, I think it turned out great and has made it such a nice ute to drive now! Thanks for watching as always guys, hope you enjoy!
SUPPORT ROAM LYFE: roamlyfe.com
INSTAGRAM: Roam_Lyfe - ยานยนต์และพาหนะ
The egt gauge is thermistor, the liquid and gas is in the stainless probe. The warmer the probe gets it decreases in resistance and colder it increase. The resistance values are scaled as a temperature when they are read bye the gauge.
Keep the Aftermarket wheel! It suits all the new upgrades you did and the chrome looks great with the gauges 😊👌
I would definitely go the nissan pulsar wheel 🤙
Can't get enough of yor vids mate. Always so quick to click on the vids. Keep up the great content
100 % agree on the dash mats. First "mod" I did when I got my Prado
Great episode to watch, video quality is getting good! And pulsar wheel for sure, oem always
Looks rad mate!! Cant wait to see it in person 🤙🤙
Both the shirts looking minttttt. Need that Roam Lyfe sticker to finish up the build
Awesome mate lovin your vids and lovin the patrol
epic build mate!! Looks mint!!
I reckon keep that wheel. looks mint with the polished gages !
Bump the crusty old wheel and keep the newy - good focal point and like you said, it complements the gauges. Top vid by the way.
Great video once again. I have an x trail leather steering wheel and love it.
gonna have to get the popcorn for this one
Awesome interior mate! Absolute ripper. Loving ya videos! Love the patrol and if me personally go with the Nissan steering wheel! Yeeee!
Thanks! Will do!
Love it already and 3 seconds in
I love the colour of Coal 🤘
absolute legend , wish you were based in WA bro 👊🇦🇺
The bolts on the seats were probably hand tight because in some cases its easier to remove the seat from the rails then take out the rails
Nissan wheel old school looking good great vid
Run the pulsa wheel and the rubber boots around the gear shifters will bring it all together
Love the content bro
Happy you went for the pulsar wheel, and if you chance your mind I’ll buy it off you lol
Mate, looks mad and coals not even finished, keep it up ay, n yer nah I'd go with that minty pulsar wheel haha.
sad those clips where missing but I didn't want this video to go to waste! hope you enjoy :)
Where did you pick up the XR6 seats from and how much mate
I would go the Nissan wheel but I like to keep things looking factory so it all blends
I would run the nissan wheel and get some canvas seat covers to hide the XR6 seats
Looks mint
Mate I would highly recommend getting different gauges, I've got multiple mates that have had those SaaS track gauges and all of them have failed within 3 months.
After market wheel for sure suits the interior better I think
Come a long way the old GQ. I'd run the pulsar wheel in it to keep that daily driver/comfort feel and look. It's a 4WD and not a racecar after all. Little side note, stick a multimeter probe in the coolant when it's running and check for a small charge going through the radiator. I installed a water gauge like that and did two radiators in the space of six months due to electrolysis eating a hole in the fins👎
After market wheel suits that rig better I think just with it having a head of aftermarket parts in it now
Done a awesome job with the ol girl mate, looks mint! Just a question where did you get the N15 steering wheel from? Been chasing one of them for years for my ol bus
i know the pain with no cupholders haha. 60 series cruiser life, although I have 6 cupholders now
Honestly bro I get what ya mean with the safety thing I’m 19 brought a Ute for 2k in good faith and rusted out to fuck when I was doing repairs and where my seats bolted on were aswell as my seatbelt
Should get ya self some rubber lined P clamps to hold that boost sender to the firewall or inner guard a lil more securley than cable ties. Although... cable ties are every 4wders number one must have item lol.
Cool vid bro and you gotta leave that sports wheel on that rig, finished that interior right of 💪💪👌👌
Thanks dude!! I’ve left the sports wheel on, I just like the new feeling to it!
Yea cool, looks mad like that 👌👌
keep the wheel it matches the gauges, looks good
Yeah go the pulsar wheel.
Can you post a link to the wizzy thing for cleaning? Cheers
The crusty old wheel for sure. The utes looking sick mate
everyone hates the SCA Guages but i honestly didn't have any issues with mine the only issue that i did find is the egt flips out a little when its wet but dries out pretty quick due to heat. but from reading the facebook heros i suspect half of them just had shit wiring or hadn't read the instructions like in regards to the low pressure warning and stuff haha
put some anti seize on the probe threads so it wont snap off in the manifold again
Love the Nissan steering wheel I’ll definitely be putting the same one in my gq now haha
Do you know if they bolt straight to like factory?
Go the factory look mate 🤙🏼
Surely you do a suspension installation vid
i found a pair of xr seats just laying around in my shed didn't know they were worth that much geez
Gidday mate love the vids u wouldn't be able to tell me where u got the cup holders from that's the one thing I don't like about my gq they have pen holders but not cup holders 😂
Patrolapart
Whats it like daily driving compare to the Nav? Any update when the rest of the suspension will be coming?
Did you sell ur NP300 . And also great video
Then you put some self tappers in it and now we have a cup holder 👌
She definitely needs a patrol docta air box mate
Pulsar wheel for the win
Well done mate. Hope the seats work for comfort. I have a Toyota Rodeo 2004 and been looking what to do for seats as the drivers side back adjustor snapped...
Hey mate I own a 2006 Holden rodeo ra and I replaced the stock seats with ve commodore seats, I put the chair rails from the stock rodeo seats straight onto the ve seats and they bolted up perfectly
Legend! I’ll hunt around and see what I can do.
I start to make one by following your video，but it's really hard for me😂，I'm doing quite slow,I wish I coule finish it before Christmas
How did you go with the water temp did it work iam thinking to do it now 🤙🏾
what is that contraption on the end of your air line you used to clean off your seats?
I think the pulsar wheel looks better tbh.
Also you need a MINT sticker 😂
That setup for that water temp sensor is terrible, there are only 2 spots that work well, A, beside the factory under the stat (drill and tap existing to the left of OEM, or get a GU housing that has a spare port).
B, drill and tap the oil cooler housing (its the best spot but a prick to do unless your actually replacing the cooler).
Pulsar wheel for sure
Do you have to do any mod plating for the new seats?
Can't go past the old pulsar wheel mate 😂
How long till you drop a canopy on this rig?
hey love your video's. where can you tis dash mat im from Belgium en cant find where i can buy one
what size fittings did you use for the coolant temp gauge
If you by second hand what do you expect with the seats?
Won't you get an air bubble underneath the water sensor?
Is the plastic trim around the gear sticks an original part? My Maverick doesn't have
Do you not have to get vehicle cert for changing seats?
Damn can only dream of dailying a rig like coal 😍
G'day mate out of curiosity did the n15 wheel fit ? I have been considering doing this mod myself but I've seen mixed reports some saying that the gq will only fit up to a n14 and others saying the n15 will fit .
Any feedback would be much appreciated as I'm a lanky bugger and it's getting bit tight in the ol girl.
Cheers
Pretty sure you just drove past me I was the shell servo if not there is one getting around similar
What turbo kit do you have in there
What was the actual brass fitting for the water temp gauge?
💯 the pulsar wheel is heaps better bra
You need a winch bar if your by yourself and get stuck then you can’t get out
Nissan wheel for sure!!
Pulsar wheel definitely
the wheel in the video looks tuffer than the pulser wheel.
Definitely the Nissan wheel not just for oem look but I wouldn’t want to head butt that After market wheel in a crash god forbid that doesn’t happen but anyways coal is the ultimate rig and those plates are minty af yewwww 🇦🇺👌🏼
what brand of gauges did you install?
What phone mount are you running?
Definitely the hectic Pulsar steering wheel
Mint
your gunna hate that saas dual gauge so much, i have up after having it replaced under warranty 3 times, i have another one that worked okay but is way out in acuracy
What is the aircon like in it? 😂
Where'd u get the seats bro? I need one in exactly that black grey combo! Run the Nissan pulsar wheel!
Keep your eyes out for old taxi xr6s getting wrecked can usually pick the seats up and because taxis keep their car clean the seats are in good Nick.
im a fat fuck but i find my GQ seats extremely comfortable and I drove that thing for 4 hours on 1 trip and not a problem, I coulda kept going
Custom door cards bro!! Witch ever wheel will give your sack more space
What car is it and are they expensive
What turbo?
go with the Nissan Pulsar steering wheel!
I think keep the steiring wheel thats in it not the pollsar one
Great vid mate, I reckon you should keep that after market steering wheel on there, looks the goods
Now 1
go the pulsar wheel.
go the nissan pulsar wheel
What do u do for work
Where do you get the cup holders from
eBay!
You wanna sell ur old ext gauge bro what brand is it
pulsar steering wheel for sure
Run a GU patrol wheel