Im looking to run a little rc plane motor similar to the one in a servo would there be any issues with the reciever overheating from the power running through it
If you use a brush motor, you should use a governor with its own power supply and the collector is only a control function for the governor, the power will run through the esc and divide it into 2 lines, a 6v line for the collector and the line. the rest is a high amperage current for the motor
Im looking to run a little rc plane motor similar to the one in a servo would there be any issues with the reciever overheating from the power running through it
If you use a brush motor, you should use a governor with its own power supply and the collector is only a control function for the governor, the power will run through the esc and divide it into 2 lines, a 6v line for the collector and the line. the rest is a high amperage current for the motor
shopee.vn/product/964867567/22838814070?gbraid=0AAAAADPpQE6shrkAENVtTrOI3DEwh8s3u&gclid=EAIaIQobChMImdXW5q3w_gIVDSxgCh2DJgALEAQYBCABEgLPU_D_BwE
@@TTD.DIY92 thank you
What is the resistance number
1k resistors can use other resistors just so that both sides have equal resistance. having some paste resistors will be more compact
You just need to use any two resistors with equal values.
Thank
Resistar name pls
You just need to use any two resistors with equal values. 😝
How can use this idea for control brushed motor 775 12 volt
probably not compatible
Can i control it with a servo tester
Ok
Can I know what the input voltage
And out put amps
5 volts. Low amps like 200 milliamps.
Input 3,7-5v
Que resiencias usas?
2 resistors of equal value are fine, try the 100 ohm type
LIKE 👍👍👍👍👍 🤩🤩🤩🤩🤩💖💖💖💖
Se podrian conectar dos motores en uno?
I think the amperage will not be enough
This is proportional
You just need to use any two resistors with equal values.