ฝัง
- เผยแพร่เมื่อ 15 เม.ย. 2021
- In this part we going to continue with the installation of the connection rod bearings ( big end bearings ) + the installation of the cylinder head. As usual we going to include some tips about this jobs.
The car which we are working on : BMW E63 M57TU2D30 TOP ( 306D5 ) 286 hp.
Broken Timing Chain Video : • Broken Timing Chain BM...
Part 1 Of Rebuilding The Engine : • BMW M57 Engine Rebuild...
Part 2 Crankshaft + Piston Rings Assembly : • BMW M57 Engine Rebuild...
Part 3 Installing The Cylinder Head + Big End Bearings : • BMW M57 Installing The...
Part 4 Bended Camshafts : • BMW M57 Bended Camshafts
Part 5 Timing Chain Assembly Procedure : • BMW M57 Timing Chain A...
Part 6 Oil Pan, Crankshaft Seal, Oil Cooler, Vacuum Pump Assembly : • BMW M57 Oil Pan, Crank...
Part 7 Fuel Injectors + Turbo Chargers Installation : • BMW M57 Fuel Injectors...
Part 8 First Start After the Overhaul : • First Start After Over...
Support the channel : / crankauto
Shop coordinates ( for business inquiries ) : / crankauto
CRANK - ยานยนต์และพาหนะ
![บุษบา - วงชานเมือง [LiveCoverVertion] Original : เมนทอล](http://i.ytimg.com/vi/Dm81sKcd9rs/mqdefault.jpg)
I love your accent and the way you teach.
I don't have an M57 but I aspire to swap one into an 80 Series Landcruiser one day. If I do, I would like to hire your services for advice. THANK YOU for inspiring us people who could never normally dream of such a thing 🙏🏽
Hey! very complete and excellent review for beginners and not only!
Watching the video now, drinking tea, quality time. Very good and informative as always
Sounds cozy :)
Your video really helps. I’m about to assemble my motor after a tear down.
Very clear and precise...........thanks...
Great video 👍
Great work !
Thanks Fraizer
good and honest job bravo.-
Master chef 👍
Thanks P3T3R !
Hi great content love watching
Im rebuilding an m57 335d 2012 with Aliminium block would the torque setting be the same for the cylinder head and the con rods bolts as the videos you have done on theses engine’s?
Great video!
Can u show how to use that paper to check the clearance?
Thank you!
Hi Crack I’m in need of help! I’m rebuilding a n57d30a I’ve the crack and con rods in with new TDC bearings but as I’m turning the crack with all 6 pistons in it’s spinning free but then get tight in certain places. Is this normal or not thanks
hello interesting video it really maybe can tell you how much tightening crank motor m57 tue2 what tightening force and how many degrees? thanks
Did you fix the Leak with lapping paste? What grade compound! How did you decarbon the intake
What kind of oil or anti-seize are you using?
What is torque for 6 forward Allen bolts? Thx
👍😎
Can you please tell me the kolbenschmidt part number for the rod bearings? Thank you!
Im in process of assembling my own m57tu2 engine after failure of valve guides/seals. Did you check yours as they are known to wear on exhaust side. My engine done 130k and was fully serviced on time. Great videos by the way👍
The machine shop have checked them, they were all fine. Really rarely we encounter problems with the valve guides on this engines, but I guess is not impossible
nice one , do you know if its possible to replace valve stems seals on bmw 116i f20 ?witout taking the head off ,use valve tool instead / thanks
rob
It should be possible. I don't see any reason for removing the cylinder head
Another awesome video. I have 2 melted pistons, is it ok to replace just the 2 pistons from 2nd hand engine? And is it ok to use my rods? Thanks.
Yes it is ok, to use second hand piston, AS LONG as they are the same as yours. M47 and M57 have different pistons from year to year, you need to be extra careful when purchasing them. Most of the time, people are selling the pistons with the rods, so if it was me, for several more euros I was going to replace them.
Hello CRANK, I have one question for you, how much torque I should have use to tighten up oil pump screws which are located around timing gear?
Find it on internet
How much time or miles or kilometres IS the lifespan of the M57 main bearings...
How many hours did this rebuild take?
Good video would like to know if there is a way you could check the engine block if it’s straight or not any video please thanks
Just watch my older videos, I have a video about that
Crank sorry nothing to do with this video but does ista d have a graphing mode ? thanks
rob..
No Ista D doesn't have that. This is the reason that I rarely use it ( + it is much slower, to connect it to the car )
@@crank3646 ok man thanks for replying ,ive got a bmw x5 e53 20005, fog lights and reverse light fault .when i press fog light button or reverse it shows activated in scan tool , if i bi-directionaly activate they work . but when reverse is selected or fog light pressed in car i get nothing any ideas ?thanks for your help
On a different website i founda that torque spec is 50nm +120”+120” which one is the right one?
On the ista+ engine M57T2 / TOP and the 635d is exactly like that, the degrees of turning are 2x120 degrees !!!
Good video Crank , now buy a cabinet and write on the front doors " SPECIALTY TOOLS THAT I CAN FIND BEFORE ENDING VIDEO " : D
For sure it will be helpful :D
P.S. Happy that at least one person, made it to the end of the video
@@crank3646 l am old mechanic , l have to make sure you are doing your job right : D P.S. l always watch all of your videos 100% .
@@petercantremember253 I will need to triple check everything I'm doing then :D
@@crank3646 ok!! "lm watching you " ( but not in a creepy way ) and l have the power to rewind :D
Because i tought you will use a 3 hole head gasket after this one is resurfaced
I have a m57n2 (30d) and the oil is mixed with coolant and coolant mixed with oil - any ideas what it can be? Car starts and runs fine with no smoke although I’ve not driven it since this discovery.
Head gasket or head crack? 😂
@@antoniohinojos3808 fortunately it wasn’t the case of a cracked head or failed head gasket.
30000 miles fault free since
@@Ess41f replacing my cylinder head right now for the same reason you described, no smoke and ran just fine. N57 😂
@@antoniohinojos3808 Could be the case for yours but mine was the oil cooler. Without a proper diagnosis it’s anyones guess.
What mileage did your cooler fail?
I just lost a rod bearing in my 335d, and I'm hoping the hardened surface of the crank survived so I can do a rebuild without having to replace it......Wishfull thinking maybe.
How do that go bet you needed a crank
@@garyshane7155 I ended up getting a donor car for a complete swap.
No torque spec on the oil sprayer for pistons
Hi bro
I dont understand one thing,
The head gasket which was in the engine was 2 hole type and you have resurfaced the head and you still bought the same 2 holes type gasket, i dont understand this point
You only need to change the headgasket is you resurfaced the block, head does not made any diferecence.
@@fabini14 he said in the video that makes difference .listen carefully
@@stefanvalchev8066 Resurface the head makes no diference, i have assembled many m57 heads always with the same number of holes, bmw manual says that gasket is for piston protrusion nothing to do with head, just piston protrusion. So if nothing is changed on the block you will always use the same type of gasket.
Stop giving advices, you only change the head gasket if you take to much from the cilinder head, I did the same, because I take very very little from the head gasket I didn’t change the head gasket
👌🙏🇮🇳
Crank....plz help. I got m57...im getting ticking,tapping noise...timing chain is new.... Could it be hidrolic lifters and how to fix plz ? 🙏
Yes it is possible that to be the case. Try with changing the oil more often few times. If this don't help just change them
@@crank3646 is it easy to change?
As far as i know...camshafts out...new lifters in and timing engine again ? Or there is something else?
How i can contact you in private plz
@@AUNS5 Yes this is the only way. Removing camshafts
@@crank3646 how many lifters i need on M57 ?
@@AUNS5 24
bonjour
je reviens sur le forum pour solliciter votre aide
j'ai constater une baisse excessive du liquide de refroidissement sur mon X5 E53 3.D 2002
sans huile dans la vase d'expansion
sans eau dans le moteur
pas de fumer blanche ni noir
et pas de bruit anormale du moteur
durite molle
d’âpres vous d’où peut venir le problème je vous remercie d'avance de votre aide .
Its not ok to stop turning the torq wrench before it clicks when you stop and go again the force of the friction goes up and the torq wrench gets tricked its a lesson learned the hard way just sharing experience.😅
Русский акцент
Dude, buy a dial indicator...
cant afford
@@crank3646 hit me up on my channel. I'll send you one with a magnetic base. They are super cheap here in America.