Rotax-ified John Deere, The Re-Thrash to Ride
ฝัง
- เผยแพร่เมื่อ 26 มี.ค. 2023
- The old long track Deere hits the shop once again! With a Rotax 670 and 151" track, the 1980 Liquifire is far from how it left the factory... This sled was running and driving when parked, but after quite a few years of collecting dust it needed some help to get back on the trail.
This sled was built back almost 10 years ago, • 151" Longtrack John De...
Here's the GROIL link, 20% off the cost of free, lol!! • GROIL: Homebrew Underc... - ยานยนต์และพาหนะ
I don't have time to watch this now, but I just wanted to say that I'm super f*ckin excited to watch it. Old school TH-cam. What TH-cam was made for.
hahaha best "sponsored" content ever!
This thing is bad ass. I’m both a skidoo and John Deere fan. This is absolutely perfect
im glad you posted i was worried you left youtube
Haha, naw still here. Should be doing my taxes instead of youtube videos though...
i been riding my SS indy 94 . white with blue and pink detailing . its a beast. you would approve
Ifn you aint got it make it ur motto,real nice mr.dangles!!snooky pa
"Screwdrivers, pickled eggs, pork rinds and belts scattered all over the hill"
That shits funny lol
You are the best, entertaining, innovative, etc. You are much appreciated!
Groil - also an excellent wood stain and concrete sealer.👍
Love watching your videos man!
Thanks man!
Great as always
Appreciate it. 👍
👌 thanks for another great video!!
Reminds me of my first snowpony, mid 70's Arctic Cat Lynx with a single cylinder 300cc Rotax stuffed in courtesy of my old man. I believe he had to reclock the exhaust can, make custom engine mounts to get belt deflection close enough to not chew stuff...man I miss those days🤤
Really cool to see that ext hood you bought from me at A1 in the video my man. Love the awesome content!
Haha, glad you noticed that!!
Nice to see a project finally get to the snow and be badass
Thanks man, I hear ya!
Love the hauling rig in that one picture, so cool 😎
Thanks 👍
Just ran my supplies empty at work? Half hour video from my fucking dude?
Cool, I’m in.
That’s not oil and grease on there! It’s groil and ease!!!
Team Arctic, on a Deere, with a Rotax in it. Lol, perfect. It's almost an AMC, all makes combined.
Lol, track and suspension is Polaris, tunnel extension is yamaha!
gonna buy me some groil! XD
Always happy to see that you have a new video - Could watch these all day long! Cheers from Québec 👍
Cheers! 👍
Nice! Exhaust sounds great. Definitely needs more wires.
Yeah, lol
How did i miss this video??? Speed dust removal lmao
Bushing out of electrical tape 😂😂😂😂
👌👌👌
Zip ties and bias plies!!!!
Bitchin🤘🏻!
Similar voice and hand gestures as Zipties And Biasplies lol
What a beaut!
Bit of a shame the snow washed off a lot of speed dust...
@@toocheaptosmokeOui oui, Sacrilege
i need me some Groil
I have some polaris 151 rails I'd sell for you to have some full rails I'm from Michigan and was at a1 as well.
The old john deere sounds awesome but i have a question for you , i have a old 72 atric cat cheetha 399 i know nothing about it i put a mukini carb on it that sits at that stupied angle like you said and the first time i start it it takes right off runs great but when i shut it off and try starting it again 1 minute latter it is flooded . Does that sound like bad crank seals thanks
Probably not crank seals if it floods. put the front end up on a few pallets and see if it starts then
@@toocheaptosmoke you werecright as usual im putting a trundra boot on they drop the carb a couple inches cause they make a bend thanks
@@bobnewman9493 👍
Tell us about that polaris charger in the beginning. My main vintage sled is a 73 charger 400. I have a video of it on my channel
That's another project firmly lodged in purgatory... Got it a while back, it's a 530 fan, needs drivers, and some motivation.
@toocheaptosmoke nice I used to have a 530 polaris custom...was a beast
Now i lowered the carb and it starts and runs good with the minkini carb but when it idles after 15 to 20 seconds it floods out it runs good when i give it a little throttle is my needle set ro high
The brass float arm should be set to sit parallel with carb body when held upside down. If your carb(s) are vibrating or shaking alot at idle it can also flood out, dampen zip tie or bungee them to something. Or needle and seat could also just be worn
@@toocheaptosmoke thanks
you got a bobcat? :)
CASE: can't afford something else...
You mean 130 piolit jet there is a 150 on it now i took a bunch apart and the smallest i found is a 135
no, the small pilot jet down inside the carb, they are sized around 20-50. Check out a mikuni diagram and you can see where it's located, you need a small screwdriver
@@toocheaptosmoke i know what the piolit jet is maybe its a letter i or l in front of the number i will try to get a 30 thanks
I have done wvery thing you said about swaping me tiltonsnn carb ti a munkuni carb it is a 399 kowosuki motor running a 300 main jet it starts good cold and sounds great but when i shut itcoff and try to restart it it floods instantly is that a bad needle and seat thanks
How bad is it flooding, just enough to not run, or like geysers of gas out the plug holes almost hydrolocking? If the first, will it fire with the throttle held open a bit? If so, smaller pilot jet
@@toocheaptosmoke it will fire a few times then flooded the plugs are wet then what size piolet jet would you recomend starting with the carb is off a 340 blizzerd and i dont know what size it is
Its a 34mmcarb but i dont know what piolit jet is in it
@@bobnewman9493 30 pilot is probably a good starting point
"Promo sm" 🌷
80hp to 118 hp ?
Probably somewhere in there... Lol
First