Hi Brett - Another possibility is that If you dont tighten the tensioner enough you can cause the chain to slap for a little bit just after starting. This in turn might of caused the guide pin to drop, making the issue dramatically worse.
Hi dear , thanks for all good videos, When the chain jumps on this engine, do I need to get new chains or it’s ok to use old one ? And what’s the reason of chain jumping A
great tips. Always wanted to see the double chain. the passenger right rear knock sensor first appeared in 1985 turbo EA82.. I just bought a rare 1985 RX engine... just turning 30 years. A lot of stuff moved on up to today. The sight of the chains swapped for belts for example..the two of them. Given the problems, I'd rather the old belts...and two valve heads for that matter, but have fun. :)
Have you come across Cam gear failure? P0018 code, runs and idles fine? 18 WRX fa20 39K miles, Thoughts? replacement for cam gear would require chain to be removed and the 3 bolts to pull the cam gear of cam shaft itself and put new one on correct?
To set the timing turn the keyway on crank to 6 o'clock position the drivers side arrows on the face of the intake cam at 8:00 and the exhaust cam to 1:00 now turn the crank to where the keyway lines up with the first dowel pin of the floating chain guide on the passenger side of engine (he was pointing to it in the video). Now put the locator link (yellow on the FB25) aligned with the oblong oval on the face of the crank sprocket. Then fish the 2 other links (orange on the FB25) and align the top one with a line on top of the intake sprocket you should now see and the exhaust needs to align with the dot on the face of the sprocket (the one on the bottom). Now install chain guides and tensioner and pull the pin for the tensioner, squeeze both guides together and you want to hear 1 more click from the tensioner and it should be done. Now rotate the crank counter clockwise to the 6:00 position now point the intake arrow to the 6:00 position and the exhaust to the 12:00 position. Now align the first locator link to the cranks oblong oval on the sprocket and the intake to the line on top and the exhaust to the dot on the face of it. Do exactly like the other one and install guides and tensioner. If you turn it over a couple times and you feel any resistance do not force just start over. this is a 2 stage process and make sure the single color locator link is not over the keyway on the crank it has to be over the oblong oval on the sprocket.
Now I'm curious if the water pump on my '15 Impreza is changable without taking the covers off. So is that an easier fix now?! cause that would be great. also aren't all subaru's chain driven now?
Is is possible to Swap the FA20 into a Gen3 Legacy? I realize there are huge electrical issues, but I desire an N/A engine with DOHC. Thanks for any help and I appreciate the videos.
I have a 2014 Subaru Forester with the 2.5 liter engine I want to do a little bit more about the engine of your other videos it seems like everything is STI turbo is there anything good that you can tell me about this particular Forester engine thank you
Jerry Ly,in my family we have 6 subies and we do all our maintenance,and what I see,the "old "belt system is heaps friendlier,no oil leaks,reliable etc etc
Hi, I keep getting a p0016 engine code and I want to pull off the cam cover. Can I pull it off and work on the engine without pulling the engine out of the car? I have broken the problem down to the bank1 (possible chip tooth), or a ghost code on the ECU /PCI. thx Dave
sorry, we choose not to give advice on work where we dont do it, its too risky to know what you can and cant do and where and with what tools my advice is choose a good local mechanic who knows the car:)
can you make an actual video in how to change the timing chain
it would be helpful
what tool did you use to measure or konw the angle of the knock sensors placement on engine
Hi Brett - Another possibility is that If you dont tighten the tensioner enough you can cause the chain to slap for a little bit just after starting. This in turn might of caused the guide pin to drop, making the issue dramatically worse.
Would a bad tensioner cause a loud tick on cold starts for a brief second?
How do you remove the timing cover? As far as I can tell I removed all the bolts.
Hi there, I changed the head gasket for LB20 and later the timing marks of the chain refuse to come to timing marks of the chain.
Reminds me a bit of David Janssen, the Fugitive from the TV show in the 60s.
Does anyone know the torque specs on the timing cover bolts for the FA20 Engine? Thank you
Hi dear , thanks for all good videos,
When the chain jumps on this engine, do I need to get new chains or it’s ok to use old one ?
And what’s the reason of chain jumping
A
great tips. Always wanted to see the double chain. the passenger right rear knock sensor first appeared in 1985 turbo EA82.. I just bought a rare 1985 RX engine... just turning 30 years. A lot of stuff moved on up to today. The sight of the chains swapped for belts for example..the two of them. Given the problems, I'd rather the old belts...and two valve heads for that matter, but have fun. :)
what is the valve clearance at the outlet and inlet? FB20B
Hello, please tell me what gaps in the valves should be on the engine FB20
Have you come across Cam gear failure? P0018 code, runs and idles fine? 18 WRX fa20 39K miles, Thoughts? replacement for cam gear would require chain to be removed and the 3 bolts to pull the cam gear of cam shaft itself and put new one on correct?
Do you need a locking pin to replace the tensioners and chains ?
no, changed nothing.
Can you do a video on properly setting the timing?
To set the timing turn the keyway on crank to 6 o'clock position the drivers side arrows on the face of the intake cam at 8:00 and the exhaust cam to 1:00 now turn the crank to where the keyway lines up with the first dowel pin of the floating chain guide on the passenger side of engine (he was pointing to it in the video). Now put the locator link (yellow on the FB25) aligned with the oblong oval on the face of the crank sprocket. Then fish the 2 other links (orange on the FB25) and align the top one with a line on top of the intake sprocket you should now see and the exhaust needs to align with the dot on the face of the sprocket (the one on the bottom). Now install chain guides and tensioner and pull the pin for the tensioner, squeeze both guides together and you want to hear 1 more click from the tensioner and it should be done.
Now rotate the crank counter clockwise to the 6:00 position now point the intake arrow to the 6:00 position and the exhaust to the 12:00 position. Now align the first locator link to the cranks oblong oval on the sprocket and the intake to the line on top and the exhaust to the dot on the face of it. Do exactly like the other one and install guides and tensioner. If you turn it over a couple times and you feel any resistance do not force just start over.
this is a 2 stage process and make sure the single color locator link is not over the keyway on the crank it has to be over the oblong oval on the sprocket.
Now I'm curious if the water pump on my '15 Impreza is changable without taking the covers off. So is that an easier fix now?! cause that would be great. also aren't all subaru's chain driven now?
I’ll keep my EJ253 😊
Is is possible to Swap the FA20 into a Gen3 Legacy? I realize there are huge electrical issues, but I desire an N/A engine with DOHC. Thanks for any help and I appreciate the videos.
we have never tried
Great tips, thanks.
dear sir, please comment on the FA20 Engine Installation of Rocker Retainer Kit. i tend not to believe their claims.
I need info can’t find a repair Manuel anywhere 2017wrx I think it threw a rod or rocker feel off. First Subaru I’ve owned know nothing about them
🤣 you won't find the answer on the interwebs
I have a 2014 Subaru Forester with the 2.5 liter engine I want to do a little bit more about the engine of your other videos it seems like everything is STI turbo is there anything good that you can tell me about this particular Forester engine thank you
What is the correct angle for the knock sensors on a fa20 dit? I am in the middle of an engine rebuild and can't find the correct angle anywhere!
I have the service manual. I can send pics if you send your email
Are the new WRX an interference engine?
Do u need the thermostat in hot climates such as the caribbean
Kenyatta Antoine yes you do.
Without it the coolant circulates too fast, the water pump cavities, and you get hot spots in the engine.
Sorry I mean can't out line to camshaft marks
Thanks Bud
Coma poner ese motor en tienpo
Is the DIT motor in the 2015 WRX chain driven?
yes
Those engines are like what, 5 years old and if those pins are coming out, I will steer clear of them. Thats absurd.
Chain? WTF
+Jerry Ly Chains are better than belts.
Jerry Ly,in my family we have 6 subies and we do all our maintenance,and what I see,the "old "belt system is heaps friendlier,no oil leaks,reliable etc etc
Hi, I keep getting a p0016 engine code and I want to pull off the cam cover. Can I pull it off and work on the engine without pulling the engine out of the car? I have broken the problem down to the bank1 (possible chip tooth), or a ghost code on the ECU /PCI.
thx
Dave
sorry, we choose not to give advice on work where we dont do it, its too risky to know what you can and cant do and where and with what tools
my advice is choose a good local mechanic who knows the car:)
DAve W I’m having the same issue code P0016 changed the cam position sensor on bank 1 and changed the crankshaft sensor. Did you ever get yours fixed?
DAve W you don't have to remove the engine just to check it. If you are doing head gaskets than is better to remove
were any of you guys able to fix your p0016 code? :( currently going through this.
@@ardikasulistija6574 Did you manage to fix it? I'm having trouble with it now.